Maytag MDB7809AWW Installation Instructions - Page 19
Secure Dishwasher in Cabinet Opening
UPC - 883049154404
View all Maytag MDB7809AWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Secure Dishwasher in Cabinet Opening 1 Double check dishwasher alignment in cabinet opening 4 Check door clearance Check that dishwasher is still level front to back and side to side in cabinet opening. IMPORTANT: If you have solid countertops such as corrian, granite, etc., you must use side mounting kit (Part Number 8212560). Follow kit instructions. (Brackets are included with kit.) 2 Remove lower dish rack and place towel Check that top of door does not contact screws, brackets, or countertop. If it does, adjust leveling legs. 5 Check inner spacing Open dishwasher door, remove lower dish rack, and place towel over pump assembly and lower spray arm of dishwasher. This will prohibit screws from falling into pump area when securing dishwasher to countertop. 3 Secure dishwasher Open door and check that space between dishwasher cabinet opening and tub is equal on both sides. If spacing is not equal, loosen bracket screws secured and shift tub. Tighten bracket screws. 6 Check side attachment plastic button NOTE: Do not drop screws into bottom of dishwasher. Locate brackets on top of dishwasher and secure dishwasher to countertop with two, #10 x 1/2" Phillipshead screws (included). The dishwasher must be secured to keep it from shifting when door is opened. If securing with a side attachment, check that sides of door do not rub against the screw heads. If they do, dishwasher must be re-centered. When dishwasher is properly centered, replace plastic buttons. 19