Maytag MDB7949SDZ Installation Guide - Page 12
Warning
View all Maytag MDB7949SDZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Prepare Dishwasher WARNING Tip Over Hazard Do not use dishwasher until completely installed. Do not push down on open door. Doing so can result in serious injury or cuts. WARNING Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. Helpful Tip: Place cardboard under dishwasher until installed in cabinet opening to avoid damaging floor covering. Remove and discard the plastic rail cover on each side of the dishwasher frame. To remove the plastic rail cover, push upward and back to unsnap it from the dishwasher frame. Option A, Remove Access Panel - Plastic Panel Using a flat-blade screwdriver, turn the plastic fasteners ¹⁄₄ turn counterclockwise to unlock them. Remove panel. Do not remove tech sheet from access panel. Option B, Remove Access Panel - Metal Panel Remove and discard the foam blocks (if blocks are present, not all models have them) located above the front legs on each side of the dishwasher. The blocks cover the rope/link pulleys on the dishwasher. Using 2 or more people, grasp sides of dishwasher door frame and place dishwasher on its back. Do not use door panel as a worktable without first covering with a towel to avoid scratching the door panel. Using a ¹⁄₄" nut driver or Phillips screwdriver, remove 2 screws attaching access panel and lower panel to dishwasher. Do not remove tech sheet from access panel. 12