Maytag MEDZ600TW Use and Care Guide - Page 20

Reverse Door Swing

Get Maytag MEDZ600TW - 27inch Front-Load Electric Dryer PDF manuals and user guides
UPC - 883049064901
View all Maytag MEDZ600TW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Reverse Door Swing You can change your door swing from a right-side opening to a left-side opening, if desired. 5. Rotate outer door 180°. 1. Place a towel or soft cloth on top of the dryer or work space to protect the surface. Remove the door assembly 1. Remove the 4 screws that hold the door hinge on the front panel of the dryer. A 180˚ B A. Dryer front panel B. Door assembly 2. Lay the door assembly on a flat, protected surface with the inside (inner door assembly) facing up. 3. Remove the 6 Phillips head screws to release the outer door assembly from the inner door assembly, as indicated below. See illustration. It is important that you remove only the 6 indicated screws. Reverse hinge 1. Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the head of the screwdriver under the plugs, being certain not to scratch the inner door surface. Lift up. 4. Lift the inner door assembly off the outer door assembly. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
20
Reverse Door Swing
You can change your door swing from a right-side opening to a left-side opening, if desired.
1.
Place a towel or soft cloth on top of the dryer or work space to protect the surface.
Remove the door assembly
1.
Remove the 4 screws that hold the door hinge on the front panel of the dryer.
2.
Lay the door assembly on a flat, protected surface with the inside (inner door assembly)
facing up.
3.
Remove the 6 Phillips head screws to release the outer door assembly from the inner door
assembly, as indicated below. See illustration. It is important that you remove only the
6 indicated screws.
4.
Lift the inner door assembly off the outer door assembly.
5.
Rotate outer door 180°.
Reverse hinge
1.
Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the
head of the screwdriver under the plugs, being certain not to scratch the inner door
surface. Lift up.
A. Dryer front panel
B. Door assembly
A
B
180˚