Maytag MER5765RAQ Use and Care Manual - Page 15

Notes: • To change the oven temperature during cooking, press the Bake pad and then the More+ or Less- pad until the desired temperature is displayed. • To change the oven temperature during preheat, press the Bake pad twice, then press the More+ or Less- pads until the desired temperature is displayed. • If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 17. After one hour in HOLD WARM: • "End" will display. • The time of day reappears in the display. To cancel Cook & Hold at any time: Press the CANCEL pad. Remove food from oven. Delay Cook & Hold CAUTION Baking Differences Between Your Old and New Oven It is normal to notice some baking time differences between a new oven and an old one. See Adjusting the Oven Temperature on page 16. Cook & Hold Cook & Hold allows you to bake for a preset amount of time, followed by a one-hour Keep Warm cycle. To set Cook & Hold: 1. Press the Cook & Hold pad. • BAKE and HOLD flash. • 000 lights in the display. 2. Select the oven temperature. The oven temperature can be set from 170° to 550°. Press or press and hold the More+ or Less- pad. • Press the More+ pad to increase the temperature. • Press the Less- pad to decrease the temperature. 3. Press Cook & Hold again or wait four seconds. • HOLD flashes. • 00:00 flashes in the display. 4. Enter the amount of time you want to bake by pressing the More+ or Less- pad. Bake time can be set from ten minutes (00:10) to 11 hours, 59 minutes (11:59). • BAKE and HOLD light in the display. • The baking time will light in the display. Do not use delayed baking for highly perishable foods such as dairy products, pork, poultry, or seafood. When using Delay, the oven begins to cook later in the day. Set the amount of time that you want to delay before the oven turns on and how long you want to cook. The oven begins to heat at the selected time and cooks for the specified length of time, then keeps food warm for up to one hour. Delay time can be set from 10 minutes (00:10) to 11 hours, 59 minutes (11:59). To set a Delayed Cook & Hold cycle: 1. Press the Delay pad. • DELAY flashes. • 00:00 flashes in the display. 2. Press the More+ or Less- pad to set the delay time. While DELAY is still flashing: 3. Press the Cook & Hold pad. • 000 lights in the display. • BAKE and HOLD flash. 4. Press More+ pad to set the baking temperature. • 00:00 and HOLD flash. • BAKE stays lit. 5. Press More+ pad to set the baking time. • The Delay time, DELAY, BAKE and HOLD light in the display. • The baking time will start counting down. When the cooking time has elapsed: • Four beeps will sound. • BAKE will turn off. • HOLD and WARM will light. • 170° will display. When the Delay time has expired: • DELAY will turn off. • Baking time is displayed. • BAKE and HOLD are displayed. To set a Delay when Cook & Hold has already been programmed: 1. Press the Delay pad. • DELAY flashes. • 00:00 appears in the display. 14