Maytag MFT2771WEB User Instructions - Page 16

■ Refrigerator door closed completely? Close the door firmly. If it does not close completely, see "The doors will not close completely." ■ Recently removed the doors? Make sure the water dispenser wire/tube assembly has been properly reconnected at the top of the refrigerator door. See "Refrigerator Doors and Drawer." ■ Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See "Water Supply Requirements." Water is leaking from the dispenser system NOTE: One or two drops of water after dispensing is normal. ■ Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever. ■ New installation? Flush the water system. See "Water and Ice Dispenser." ■ Recently changed water filter? Flush the water system. See "Water and Ice Dispenser." Water from the dispenser is warm NOTE: Water from the dispenser is only chilled to 50°F (10°C). ■ New installation? Allow 24 hours after installation for the water supply to cool completely. ■ Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely. ■ Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water. ■ Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See "Water Supply Requirements." WATER FILTER CERTIFICATIONS 16