Maytag MGD6400TQ Use and Care Guide - Page 14

Hang door by placing screw heads into top slotted holes of hinges and slide door down.

Get Maytag MGD6400TQ - 29inch Gas Dryer PDF manuals and user guides View all Maytag MGD6400TQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

2. Replace the 4 screws in the same holes. 3. Remove the 4 screws from the opposite side of the door. 5. Install screws in the top hinge holes in the door. Do not tighten screws. Leave approximately ¼" (5 mm) of screw exposed. A A A. Install these screws first. 6. Hang door by placing screw heads into top slotted holes of hinges and slide door down. Align bottom screw holes in hinge and door. Install two bottom screws. Tighten all hinge screws. 4. Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side to attach the hinge to the front panel. 7. Close door to engage door strike. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
14
2.
Replace the 4 screws in the same holes.
3.
Remove the 4 screws from the opposite side of the door.
4.
Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side
to attach the hinge to the front panel.
5.
Install screws in the top hinge holes in the door. Do not tighten screws. Leave
approximately ΒΌ" (5 mm) of screw exposed.
6.
Hang door by placing screw heads into top slotted holes of hinges and slide door down.
Align bottom screw holes in hinge and door. Install two bottom screws. Tighten all hinge
screws.
7.
Close door to engage door strike.
A. Install these screws first.
A
A