Maytag MGD9700SB Use and Care Manual - Page 5

INSTALLATION INSTRUCTIONS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. ■ 8" or 10" pipe wrench ■ Level ■ 8" or 10" adjustable wrench (for gas connections) ■ Flat-blade screwdriver ■ Adjustable wrench that opens to 1" (2.5 cm) or hex-head socket wrench (for adjusting dryer feet) nut driver or socket wrench (recommended) ■ Knife ■ Vent clamps ■ Pipe-joint compound resistant to LP gas ■ Caulking gun and compound (for installing new exhaust vent) ■ Pliers ■ Tape measure Parts supplied Remove parts packages from dryer drum. Check that all parts are included. 4 Leveling legs NOTE: Do not use leveling legs if installing the dryer on a pedestal. Parts needed Check local codes and with gas supplier. Check existing gas supply, electrical supply and venting. Read "Electrical Requirements," "Gas Supply Requirements" and "Venting Requirements" before purchasing parts. ■ For close-clearance installations between 31.5" (80.01 cm) and 37" (93.98 cm), see "Plan Vent System" section for venting requirements. Optional Pedestal Are you placing the dryer on a pedestal? You have the option of purchasing pedestals of different heights separately for this dryer. You may select a 10" (25.4 cm) pedestal or a 15.5" (39.4 cm) pedestal with a storage drawer. The pedestal will add to the total height of the dryer for a total height of approximately 46" (116.8 cm) or 51.5" (130.8 cm), respectively. For a garage installation, you will need to place the 10" (25.4 cm) pedestal at least 9" (22.9 cm) above the floor. You will need to place the 15.5" (39.4 cm) pedestal at least 3" (7.6 cm) above the floor. Optional pedestal (15.5" [39.4 cm] model shown) The pedestals are available in several colors. To order, call the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. Pedestal Height Color Part Number 10" (25.4 cm) White MHP1000SQ0 10" (25.4 cm) Black MHP1000SB0 15.5" (39.4 cm) White MHP1500SQ0 15.5" (39.4 cm) Black MHP1500SB0 15.5" (39.4 cm) Pacific Blue MHP1500SK0 Stack Kit Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack Kit. To order, call the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. Ask for Part Number 8212640. 37" (93.98 cm) Mobile home installations require special parts (listed following) that may be ordered by calling the dealer from whom you purchased your dryer. For further information, please refer to the "Assistance or Service" section. ■ Mobile Home Installation Kit. Ask for Part Number 346764. ■ Metal exhaust system hardware. 5