Maytag MGDB725BW Dimension Guide
Maytag MGDB725BW Manual
 |
View all Maytag MGDB725BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MGDB725BW manual content summary:
- Maytag MGDB725BW | Dimension Guide - Page 1
Gas Dryer PRODUCT MODEL NUMBERS MGDB700B, MGDB725B, MGDB880B, MGDB980B DRYER DIMENSIONS Models with riser Bottom view: Side view Models without riser Back view NOTE: Most installations require a minimum 5" (102 mm) clearance behind the dryer installation and servicing. ■■ of the dryer to reduce - Maytag MGDB725BW | Dimension Guide - Page 2
gas must be used. An individual manual shutoff valve must be installed within 6 ft (1.8 m) of the dryer in accordance with the National Fuel Gas that will help achieve best drying performance. Maytag Vent System Chart Number of 90° elbows Type Instructions packed with product. Specifications
-
1 -
2
 |
 |
Gas Dryer
PRODUCT MODEL NUMBERS
W10562336B
08/2013
NOTE:
Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements”.
MGDB700B, MGDB725B, MGDB880B, MGDB980B
DRYER DIMENSIONS
Back view
Side view
Models with riser
Models without riser
Back view
Side view
Bottom view:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with
tested spacing of 0" (0 mm) clearance on sides and rear.
■
Additional spacing should be considered for ease of
installation and servicing.
■
Additional clearances might be required for wall, door, and
floor moldings.
■
Additional spacing should be considered on all sides of
the dryer to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings are
acceptable.
■
Companion appliance spacing should also be considered.