Maytag MHW9000YG Dimension Guide - Page 1
Maytag MHW9000YG Manual
View all Maytag MHW9000YG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Front-Loading Automatic Washer PRODUCT MODEL NUMBERS MHW6000X, MHW7000X, MHW9000X, MHW9000Y Electrical: A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided. Drain System Options Drain system can be installed using a floor drain, wall standpipe, floor standpipe, or laundry tub. Select method you need. IMPORTANT: To avoid siphoning, 4.5" (113 mm) of drain hose should be inside standpipe or below the top of wash tub. Always secure drain hose with cable tie Floor standpipe drain system 41/2" (113 mm) Minimum diameter for a standpipe drain: 2" (51 mm). Minimum carry-away capacity: 17 gal. (64 L) per minute. A 1/4" (6 mm) diameter to 1" (25 mm) diameter Top of standpipe must be at least 30" (762 mm) high; install no higher than 96" (2.44 m) from bottom of washer. If you must install higher than 96" (2.44 m), you will need a sump pump system. Wall standpipe drain system 41/2" (113 mm) OVERALL DIMENSIONS Washer dimensions 51" (1295 mm) 27" (686 mm) Custom under counter installation: 38" (965 mm) 1/2" - 1" (13 mm - 25 mm) 39" min. (990 mm) 311/2" (800 mm) 1" (25 mm) 1" (25 mm) Recessed area or closet installation (washer only): All dimensions show recommended spacing allowed, except for closet door ventilation openings which are the minimum required. 4" (102 mm) 3" (76 mm) 48 in.2 (310 cm2) 3" (76 mm) 24 in.2 (155 cm2) For each arrangement, consider allowing more space for ease of installation and servicing, and spacing for companion appliances and clearances for walls, doors, and floor moldings. Space must be large enough to allow door to fully open. Add spacing of 1" (25 mm) on all sides of washer to reduce noise transfer. If a closet door or louvered door is installed, top and bottom air openings in door are required. 1" 1" (25 mm) (25 mm) Recessed area or closet installation (stacked washer and dryer): 6" (152 mm) Custom cabinet installation: 3" (76 mm) 771/2" (1969 mm) 48 in.2 (310 cm2) 7" (178 mm) 14" (356 mm) Floor drain system 5" (127 mm) 3" (76 mm) 24 in.2 (155 cm2) 1" 1" (25 mm) (25 mm) 4" (102 mm) 1" (25 mm) 1" (25 mm) Floor drain system requires additional parts. Minimum siphon break: 28" (711 mm) from bottom of washer. Laundry tub drain system 41/2" (113 mm) min. 30" (762 mm) Minimum capacity: 20 gal. (76 L). Top of laundry tub must be at least 30" (762 mm) above floor; install no higher than 96" (2.44 m) from bottom of washer. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. W10254447B 02/2011