Maytag MRT118FFF Dimension Guide - Page 1

Maytag MRT118FFF Manual

Get Maytag MRT118FFF PDF manuals and user guides View all Maytag MRT118FFF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Top Mount Refrigerator PRODUCT MODEL NUMBERS MRT118FFF PRODUCT DIMENSIONS Electrical: A 115-volt, 60-Hz, AC-only, 15or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned o by a switch. Do not use an extension cord. NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are nished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See "Using the Controls." Water: A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate ice maker and water dispenser. If you have questions about your water pressure, call a licensed, quali ed plumber. IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa). Reverse Osmosis Water Supply: If a reverse osmosis water ltration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). F E cabinet D incl. handle B 4 top of cabinet 1 A overall C 90˚ Model Number MRT118FFF Model Size 18.2 cu.ft Height - Height - Top Reversible Overall of Cabinet Door "A" "B" Yes 6513⁄16" 653⁄8" (167.1 cm) (166.1 cm) Depth Door Open 90 "C" 593⁄4" (151.8 cm) ⁄" De(p7t3h.3"Dcm" ) 313⁄8" Depth - Width - Cabin2e9t3⁄4 Cabinet On(l7y5".E6"cm) "F" 287⁄8" 293⁄4 (79.7 cm) (73.3 cm) (75.6 cm) LOCATION REQUIREMENTS ¹⁄₂" (1.25 cm) To ensure proper ventilation for your refrigerator, allow for 1/2" (1.25 cm) space on each side and at the top. Allow at least 2" (5.08 cm) between back of cabinet and the wall. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. If you are installing your refrigerator next to a fixed wall, leave 3 1⁄ 8" (8 cm) minimum on the hinge side (depending on your model) to allow for the door to swing open. NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C). 3¹⁄₈" (8 cm) Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation Ref. W10852159A our products, we reserve the right to change materials and speci cations without noticeIn. structions packed with product. Speci cations subject to change without notice. 6/16

  • 1
Top Mount Refrigerator
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
MRT118F
FF
Electrical:
A 115-volt, 60-Hz, AC-only, 15-
or 20-amp fused, grounded electrical supply
is required. It is recommended that a
separate circuit serving only your refrigerator
be provided. Use an outlet that cannot be
turned off by a switch. Do not use an
extension cord.
NOTE:
Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat,
Refrigerator or Freezer Control depending on
the model) to OFF and then disconnect the
refrigerator from the electrical source. When
you are finished, reconnect the refrigerator to
the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See “Using the Controls.”
Water:
A cold water supply with water
pressure between 30 and 120 psi (207 and
827 kPa) is required to operate ice maker and
water dispenser. If you have questions about
your water pressure, call a licensed, qualified
plumber.
IMPORTANT:
The pressure of the water
coming out of a reverse osmosis system
going to the water inlet valve of the
refrigerator needs to be between 30 and
120 psi (207 and 827 kPa).
Reverse Osmosis Water Supply:
If a reverse
osmosis water filtration system is connected
to your cold water supply, the water pressure
to the reverse osmosis system needs to be a
minimum of 40 to 60 psi (276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10
852159
A
6/16
¹/₂
" (1.25 cm)
3
¹/₈
" (8 cm)
To ensure proper ventilation for your refrigerator, allow for
1
/
2
"
(1.25 cm) space on
each side and at the top. Allow at least 2" (5.08 cm) between back of cabinet and the
wall. If your refrigerator has an ice maker, make sure you leave some extra space at
the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave
3
1
/
8
" (8 cm) minimum
on the hinge side (depending on your model) to allow for the door to swing open.
NOTE:
It is recommended that you do not install the refrigerator near an oven,
radiator, or other heat source, nor in a location where the temperature will fall below
55°F (13°C).
4
1
A
overall
B
top of
cabinet
F
incl.
handle
D
90˚
C
cabinet
E
Model
Number
Model
Size
Reversible
Door
Height -
Overall
"A"
Height - Top
of Cabinet
"B"
Depth -
Door Open
90 "C"
Depth "D"
Depth -
Cabinet
Only "E"
Width -
Cabinet
"F"
MRT118F
FF
18.2 cu.ft
Yes
65
1
3
/
16
"
(
167.1
cm)
65
3
/
8
"
(166.1 cm)
59
3
/
4
"
(151.8 cm)
31
3
/
8
"
(79.7 cm)
28
7
/
8
"
(73.3 cm)
29
3
/
4
(75.6 cm)