Maytag MVWC200BW Use & Care Guide - Page 8
Select WASH TEMP and, SOIL LEVEL, Press START/Pause/Unlock, to begin wash cycle, Select Cycle - availability
View all Maytag MVWC200BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. Select LOAD SIZE 9. Select Cycle Options Select the load size setting most suitable for your load. Small will add a low amount of water for smaller loads and Super will add the most amount of water for large or bulky loads. Items need to move freely. 8. Select WASH TEMP and SOIL LEVEL Select the desired cycle options. If you are using fabric softener, be sure to select one of the One Rinse with Fabric Softener or Extra Rinse with Fabric softener options. 10. Press START/Pause/Unlock to begin wash cycle After selecting the Load Size, turn Wash Temp or Soil Level knobs to select the cycle modifier, if desired. Not all settings are available with all cycles. All rinses are cold. NOTE: Always read and follow fabric care label instructions to avoid damage to your garments. Wash Temp Hot Some cold water is added to save energy. This will be cooler than your hot water heater setting. Warm Some cold water will be added, so this will be cooler than what your previous washer provided. Cool Warm water may be added to assist in soil removal and to help dissolve detergents. Cold This is the temperature from your faucet. If your tap cold water is very cold, warm water may be added to assist in soil removal and help dissolve detergent. Suggested Fabrics Whites and pastels Durable garments Heavy soils Bright colors Moderate to light soils Colors that bleed or fade Light soils Dark colors that bleed or fade Light soils Press the START/Pause/Unlock button to start the wash cycle. When the cycle has finished, the DONE indicator will light. Promptly remove garments after cycle has completed to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps. Unlocking the lid to add garments If you need to open the lid to add 1 or 2 missed garments: Press START/Pause/Unlock; the lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Then close lid and press START/Pause/Unlock again to restart the cycle. If lid is left open for more than 10 minutes, the water will pump out automatically. 8