Maytag MVWC565FW Quick Reference Sheet - Page 1

Quick Start Guide Using Your High-Efficiency Low-Water Washer 1 ADD HE DETERGENT 2 LOAD THE WASHER 3 ADD BLEACH If desired. Follow manufacturer's instructions to determine amount of laundry products to use. 4 ADD FABRIC SOFTENER If desired. Without Dispenser Add fabric softener during the final rinse. Press START/PAUSE to pause the washer. Lift lid and add measured recommended amount of liquid fabric softener. Close lid and press START/PAUSE button again to start the washer. 5 SELECT CYCLE Cycles vary by model. 6 SELECT WASH TEMP 7 CYCLE OPTIONS Options vary by model. 8 PRESS START Press and release to start. NOTE: If you hold Start for more than 3 seconds, it will cancel your cycle and drain the washer. 9 ADD A GARMENT During Fill/Sensing, open the lid, add a garment, close the lid, and press START. NOTE: Washer will not fill with lid open. IMPORTANT: If lid is left open for more than 10 minutes, the wash cycle will cancel and the water will pump out. 10 CANCELING WASH CYCLE Hold START for more than 3 seconds to cancel your cycle and drain the washer. NOTE: See "Cycle Guide" in the Use and Care Guide for more information about cycles, settings, and options. Not all cycles, settings, and options are available with all models. Read your Use and Care Guide before using your washer. W10783949A W10783950A-SP  © 2015. All rights reserved. 04/15 Printed in U.S.A.