Memorex MD6451BLK User Guide - Page 10

CD OPERATION (CONTINUED) 60 SECOND ELECTRONIC ANTI-SHOCK SYSTEM This CD player has a built-in Anti-Shock System that cuts down on CD skipping, which is useful when using the CD player in the car or while jogging/walking. Follow the steps below to activate and understand the Anti-Shock System: 1 2 Open the CD compartment lid by sliding the CD OPEN switch to the right. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the PHONES jack. With a CD inserted, press the PLAY/PAUSE (®p)/POWER ON button to turn the unit on and start playback. 3 The Anti-Shock System will start automatically, the sound will mute for a moment and the display will blink "ESP". Within a few seconds, "ESP" will light solid to indicate music signals are stored in memory. 4 If the CD player is subject to vibration during playback, "ESP" will blink again. During the vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc. CONTINUED ON THE NEXT PAGE 9