Memorex MMP8620 User Guide
Memorex MMP8620 Manual
 |
View all Memorex MMP8620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Memorex MMP8620 manual content summary:
- Memorex MMP8620 | User Guide - Page 1
the FM Radio 54 Operation-Recorder Mode 55 • To Create a Voice Recording 55 • To Delete a Recording 56 • To Listen to a Recording 56 Settings Menu 57 Troubleshooting Guide 69 Formatting the Player 71 Resetting the Unit 72 Updating the Firmware 72 Specifications 73 1 - Memorex MMP8620 | User Guide - Page 2
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de - Memorex MMP8620 | User Guide - Page 3
void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur - Memorex MMP8620 | User Guide - Page 4
, and without distortion. Once you have established a comfortable sound level: • Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. We Want You Listening For A Lifetime Used - Memorex MMP8620 | User Guide - Page 5
Decibel Level 30 40 50 60 70 80 Example Quiet library, soft whispers Living room, refrigerator, bedroom away from traffic Light traffic, normal conversation, quiet office Air conditioner at 20 feet, sewing machine Vacuum cleaner, hair dryer, noisy restaurant Average city traffic, garbage disposals, - Memorex MMP8620 | User Guide - Page 6
LOCATION OF CONTROLS 1. MyDJ Button 2. Hold Switch 3. Display 4. Record Button 5. Menu Button 6. Navigation Up Button 7. Enter/Play/Pause ®p Button 8. Navigation Left/Skip-Search o Button 9. Navigation Down Button 10. Headphones Jack, MIC (Microphone) and USB Jack (Bottom of Unit) (HEADPHONES PART - Memorex MMP8620 | User Guide - Page 7
screen. When charging, the battery indicator will flash between empty and the current charge. Once the battery is fully charged, the indicator will stop flashing. Figure 1 NOTES: • To disconnect this unit from your computer, make sure to follow the "Safely Remove Hardware" instructions on page 33 - Memorex MMP8620 | User Guide - Page 8
you insert the Software Installation CD, you will first have to select to "Install PC Software" or "Install Mac OS X Software" (depending on your computer). Please note that the screens shown in the manual are for a PC. • For PC users, please only install Windows Media Player 10 OR MusicIP Mixer - Memorex MMP8620 | User Guide - Page 9
, double-click My Computer then double-click on the CD drive, then the installation screen will appear. After selecting "Install PC Software", click "Download & Install MyDJ Plug-in for Windows Media Player". 2. At the first pop-up screen, click "Save" to save "wmp_plugin.msi" onto your computer - Memorex MMP8620 | User Guide - Page 10
the folder as is. Then click "Next". 5. At the "Confirm Installation" screen, click "Next" to start the installation. 6. When successfully completed, the "Installation Complete" screen will appear. Click "Close" to exit the Setup Wizard. Please see page 25 for how to use the MyDJ Plug-In. 10 - Memorex MMP8620 | User Guide - Page 11
click on the CD drive, then the installation screen will appear. After selecting "Install PC Software", click "Download Windows Media Player". 2. You will be directed to the Windows Media Download Center. Select Download (Windows Media Player), Version (Player 10 [for Windows XP] is recommended) and - Memorex MMP8620 | User Guide - Page 12
WINDOWS MEDIA PLAYER 10 INSTALLATION 4. Installation will continue. 5. At the Welcome screen, click NEXT. 6. Select the desired privacy options. 12 - Memorex MMP8620 | User Guide - Page 13
7. Click on Privacy Statement to view the Statement, if desired. When finished, click "Next". 8. Read the instructions and tick the check boxes as desired. Then click on More Options and tick the check boxes as desired. 9. Click "Finish" to finish the installation of Windows Media Player 10. 13 - Memorex MMP8620 | User Guide - Page 14
My Computer then double-click on the CD drive, then the installation screen will appear. After selecting "Install PC Software" or "Install Mac OS X Software", click "Download & Install MusicIP Mixer" (for Windows or for Mac OS X 10.3 or higher, depending on your computer). 2. For Windows, at the - Memorex MMP8620 | User Guide - Page 15
. Select "I accept the agreement" and then click "Next". 5. The "Select Destination Location" screen will appear. It is recommended to keep the folder as is. Then click "Next". 6. The "Select Start Menu Folder" screen will appear. It is recommended to keep the folder as is. Then click "Next". 15 - Memorex MMP8620 | User Guide - Page 16
appear. If the "Install Bonjour Service (to enable TiVo support)" is listed as an option, you do NOT need to select it. It is highly recommended that you select "View help file", so that after installation, you will immediately be directed to further instructions regarding the MusicIP Mixer. Click - Memorex MMP8620 | User Guide - Page 17
-click on the CD drive, then the installation screen will appear. After selecting "Install PC Software", click "Download & Install MediaCoder for Windows". 2. The "Welcome" screen will appear. Click "Next". 3. The "License Agreement" screen will appear. Select "I agree..." and then click "Next". 17 - Memorex MMP8620 | User Guide - Page 18
INSTALLING MEDIACODER 4. The "User Information" screen will appear. Enter your user information and click "Next". 5. The "Installation Folder" screen will appear. It is recommended to keep the folder as is. Then click "Next". 6. The "Shortcut Folder" screen will appear. Select the desired Shortcut - Memorex MMP8620 | User Guide - Page 19
INSTALLING MEDIACODER 7. The "Ready to Install" screen will appear. Click "Next". 8. After the program is done installing, the "Installation Successful" screen will appear. Click "Finish" to end installation. See page 32 for how to use MediaCoder. 19 - Memorex MMP8620 | User Guide - Page 20
download digital music files from the Internet or use encoding software to convert music that you have on an audio CD into MP3 or WMA format. Once these files are stored on your computer you can easily copy them to your player. For Windows XP, if you have already installed WMP (Windows Media Player - Memorex MMP8620 | User Guide - Page 21
DOWNLOADING AND TRANSFERRING FILES (CONT.) MEDIA FILES SUPPORTED FORMATS Audio Formats: MP3, MPEG 1/2/2.5 Layer 3 with a 30fps, 768 kbps max) + MP3 Photo Format: baseline JPEGs. IMPORTANT NOTE FOR MP3s: Windows Media Player Sync may remove MyDJ ready information from MP3 files if the "Convert files - Memorex MMP8620 | User Guide - Page 22
DOWNLOADING AND TRANSFERRING FILES (CONT.) For Windows XP, you can also utilize the previously installed Windows Media Player 10 software to convert music on an audio CD into MP3 or WMA format as follows: 1. Open the Windows Media Player 10 Browser, then click on the "Rip" icon on the top tool bar. - Memorex MMP8620 | User Guide - Page 23
playback. • For Windows ME and Windows 2000, please visit www.Microsoft.com to download the corresponding Windows Media Player to transfer music files to the player. • If the external card is inserted, the memory card indicator " " will appear at the bottom of the display. • If a song with the MyDJ - Memorex MMP8620 | User Guide - Page 24
DOWNLOADING AND TRANSFERRING FILES (CONT.) CREATING A PLAYLIST USING WINDOWS MEDIA PLAYER 10 (FOR WINDOWS XP ONLY) Follow the steps below to create a playlist in the Music menu, using WMP (Windows Media Player) 10: 1. Connect your player 10 will synchronize the selected playlist(s) to this - Memorex MMP8620 | User Guide - Page 25
USING THE MyDJ PLUG-IN The MyDJ Plug-In will open automatically when you start Windows Media Player 10 for the first time after installation. (If you don't have any songs in your WMP [Windows Media Player] library, you will first need to add some in order to use the MyDJ Plug-In.) The first time you - Memorex MMP8620 | User Guide - Page 26
for Mixable Tracks In order to use the MyDJ feature on this unit, you will need to add at least 25 tracks that have been analyzed using the MyDJ Plug-In . You can enable a column within WMP 10 that will indicate if the track is MyDJ ready by following the steps below: 1. In - Memorex MMP8620 | User Guide - Page 27
THE MUSICIP MIXER For Mac OS X Step 1: Locate Music Files The first time the MusicIP Mixer is run, it will prompt you to import music selection, tracks from the iTunes database, Music folder or other source will be imported into the MusicIP Mixer library. Step 2: Analyze Your Music Once the - Memorex MMP8620 | User Guide - Page 28
USING THE MUSICIP MIXER (CONTINUED) slightly altered to store MusicIP tags. Once the analysis data has been saved to your tracks, they are ready to be used for instant playlist creation on your device. Viewing Analysis Status (Optional) To view the progress of the analysis process, click on the - Memorex MMP8620 | User Guide - Page 29
USING THE MUSICIP MIXER (CONTINUED) For Windows XP Step 1: Locate Music Files The first time the MusicIP Mixer is run, it will prompt you to import music from your My Music folder or from another source folder of your choice. Please note that if you have either - Memorex MMP8620 | User Guide - Page 30
acoustic characteristics for use in creating playlists. You may stop the analysis process by selecting "Stop". You will know when a track within your collection has been successfully analyzed as it will turn from black to green. Step 3: Archive Analysis You must save the analysis data to your audio - Memorex MMP8620 | User Guide - Page 31
USING THE MUSICIP MIXER (CONTINUED) Viewing Analysis Status (Optional) Analysis progress details are located in the bottom left corner of the Mixer's status bar. This data is visible at any time during the analysis process. Step 4: Transfer Analyzed Tracks to Your Device To transfer analyzed tracks - Memorex MMP8620 | User Guide - Page 32
supported by the player. 1. Open the previously installed MediaCoder program. 2. Change the Interface mode from Simple mode to Normal mode in the Options>User " window, type the path of the directory where the converted files will be saved. 5. Set up the advanced conversion settings. There are many - Memorex MMP8620 | User Guide - Page 33
a Hardware Device" window will pop-up. Click "OK". When the "Safe to Remove Hardware" window is displayed, you may remove the player from the USB cable or is safe to remove the player from the computer. • If you are using Windows XP and the Windows Media Player 10 software is already installed, then - Memorex MMP8620 | User Guide - Page 34
Memorex screen will take several seconds to several minutes to update the player's library depending on the number of songs that you have transferred to the player. When done, the Music Player menu will a mini SD memory card (not included) up to 2GB, with the back of the card facing up as shown - Memorex MMP8620 | User Guide - Page 35
Volume Up/Down button during playback. NOTE: While changing the volume, the volume "pop up" indicator will be overlaid across the bottom of the existing screen (except in Video Playback mode) and will slide off screen after three seconds if neither Volume button is pressed. You can close the volume - Memorex MMP8620 | User Guide - Page 36
OPERATION (CONTINUED) HOLD SWITCH 1 DEFAULT/FULL SCREEN 1 Slide the Hold switch to the Lock position (down) to lock the buttons; "Locked" will appear briefly and then the Lock icon will appear in the lower left corner of the screen. This is useful, for example, when you do not want the file - Memorex MMP8620 | User Guide - Page 37
OPERATION-MUSIC PLAYBACK MODE TO LISTEN TO MP3s/WMAs This unit supports the following audio formats: MP3, MPEG 1/2/2.5 Layer 3 with a press the Enter/Play/Pause ®p button 3 to select that category. A list will appear separating the files into the selected search criteria; see the following page for - Memorex MMP8620 | User Guide - Page 38
®p button 3 to start playback. NOTES: • See pages 20-24 for information on uploading MP3/WMA files to this unit. • While you are browsing your music, you can press the However, if the selection is MyDJ ready, the player will create a djMix. • You can pause playback at anytime by pressing the Enter/Play/ - Memorex MMP8620 | User Guide - Page 39
OPERATION-MUSIC PLAYBACK MODE (CONTINUED) TO DELETE SONGS FROM THE PLAYQUEUE 1 1 2 3 2 1 3 2 Enter the PlayQueue submenu as described on page 37. To clear all tracks in the queue, use the Navigation Up 1 and/or Down 2 button to select Clear All and then press the Enter/Play/Pause ®p button - Memorex MMP8620 | User Guide - Page 40
SEARCH 1 2 1 During playback, press and hold the Navigation Right/Skip-Search n 1 or Left/o 2 button to move the player forward or backward within a file to locate a specific musical passage. The player will move forward or backward at high speed as long as the button is held. When you release - Memorex MMP8620 | User Guide - Page 41
, please refer to page 59. NOTE: Setting an option in the Music Contextual menu, pressing the Menu button or waiting three seconds without any activity will close the Music Contextual menu. 41 - Memorex MMP8620 | User Guide - Page 42
®p button 3 to confirm. NOTES: • Setting an option in the Music Contextual menu, pressing the Menu button or waiting three seconds without any activity will close the Music Contextual menu. • During playback, if the Shuffle mode is activated, you can browse the Shuffle sequence in the Play Queue - Memorex MMP8620 | User Guide - Page 43
/Skip-Search n 1 or Left/o 2 button. NOTE: Setting an option in the Music Contextual menu, pressing the Menu button or waiting three seconds without any activity will close the Music Contextual menu. 43 - Memorex MMP8620 | User Guide - Page 44
) based on the current song. NOTE: Setting an option in the Music Contextual menu, pressing the Menu button or waiting three seconds without any activity will close the Music Contextual menu. 44 - Memorex MMP8620 | User Guide - Page 45
using the Navigation Down button 1, followed by the Enter/Play/Pause ®p button 2. Press the Enter/Play/Pause ®p button again to select djScan. The player will enter djScan mode. NOTE: You can also enter djScan mode by pressing and holding the MyDJ button at any time, except Radio playback, Radio - Memorex MMP8620 | User Guide - Page 46
-MUSIC PLAYBACK MODE (CONTINUED) NOTES: • IMPORTANT!: The unit must have at least 25 MyDJ ready songs for the MyDJ functions to work. • Maximum 20 songs will be placed into the MyDJ playlists. • You can also press the MyDJ button with a track selected in the Browse Music menus or in Music Playback - Memorex MMP8620 | User Guide - Page 47
Up 1 and/or Down 2 buttons, followed by the Enter/Play/ Pause ®p button 3 to select it. The player will enter djMix Browse mode. Follow the Browse Music (All Songs, Albums, Artists) instructions on page 38 to select a desired track. Press the Enter/Play/Pause ®p button 3 (or the Navigation Right - Memorex MMP8620 | User Guide - Page 48
25 MyDJ ready songs for the MyDJ functions to work. • Maximum 20 songs will be placed into the MyDJ playlists. • For MyDJ information, enter the MyDJ menu the Enter/Play/Pause ®p button to select it. • djMoods allows the user to listen to songs based on the energy level of the music. The technology - Memorex MMP8620 | User Guide - Page 49
PLAYBACK MODE TO WATCH VIDEOS This unit supports the following video formats: WMV-WMV 9 (simple profile, 220 x 176 resolution, 30 fps, 384 kbps max) + WMA 9 (sample rate of 8-48 kHz), MPEG-4-AVI (220 x 176 resolution, 30fps, 768 kbps max) + MP3 1 2 2 1 1 3 2 Turn the unit on and access the - Memorex MMP8620 | User Guide - Page 50
SEARCH 1 2 1 During playback, press and hold the Navigation Right/Skip-Search n 1 or Left/o 2 button to move the player forward or backward within a video to locate a specific scene. The player will move forward or backward at high speed as long as the button is held. (During high-speed search - Memorex MMP8620 | User Guide - Page 51
OPERATION-PHOTO PLAYBACK MODE TO VIEW PHOTOS-This unit supports baseline JPEGs. 1 2 2 1 1 3 2 Turn the . skip to the next or previous photo. NOTES: • You can also toggle between slideshow auto and manual mode by pressing the Enter/Play/Pause ®p button. • See pages 20-21 and 23 for information - Memorex MMP8620 | User Guide - Page 52
the previous page, press the Enter/Play/Pause ®p button 1; a thumbnail view of the photos will appear in the display. Use the Navigation Up, Down, Right/Skip-Search n or Left/ Pause ®p button; the unit will enter Slideshow mode to play all supported photos. NOTE: • To exit Slideshow mode, press the Menu - Memorex MMP8620 | User Guide - Page 53
, or pressing and holding to search more quickly, the Navigation Right/Skip-Search n 1 or Left/o 2 button. When a station is broadcasting in stereo, "STEREO" will appear in the display. 3 Press the VOLUME Up/Down buttons to increase or decrease the volume. ANTENNA 1 FM-The headphones act as an - Memorex MMP8620 | User Guide - Page 54
as Preset 1 (if no stations have been saved yet). Repeat Step 1 to add up to 20 presets. After you have saved Preset 20, the unit will start saving over Preset 1, etc. TO LOAD PRESETS 1 1 TO RECORD THE FM RADIO 1 1 2 While in FM Playback mode, use the Navigation Up 1 and/or Down - Memorex MMP8620 | User Guide - Page 55
/or Down 2 buttons to select Record Voice. Then press the Enter/Play/Pause ®p button 3 to select. 3 2 3 1 Speak into the microphone and the player will create a voice recording. Press the Enter/Play/Pause ®p button 1 to pause recording, and press again to resume recording. Press the Record button - Memorex MMP8620 | User Guide - Page 56
OPERATION-RECORDER MODE (CONTINUED) TO DELETE A RECORDING 1 2 1 3 2 1 3 2 Access the Recorder menu as described on the previous page. Use the Navigation Up 1 and/or Down 2 buttons to select Delete File, followed by the Enter/Play/Pause ®p button 3. Use the Navigation Up 1 and/or Down 2 - Memorex MMP8620 | User Guide - Page 57
SETTINGS MENU SETTING THE COLOR THEME 1 2 2 1 Turn the unit on and access the main menu as described on page 34. Select Settings using the Navigation Down button 1, followed by the Enter/Play/Pause ®p button 2. Press the Enter/Play/Pause ®p button to select "Color Theme". 3 4 1 3 2 Select - Memorex MMP8620 | User Guide - Page 58
or Landscape Right) using the Navigation Up 1 and/or Down 2 buttons, followed by the Enter/Play/Pause ®p button 3 to confirm. NOTE: The Navigation button functions will rotate to match the "Orientation" setting that you have selected. Press the Menu button to go back to the Main menu. 58 - Memorex MMP8620 | User Guide - Page 59
SETTINGS MENU (CONTINUED) SETTING THE EQUALIZER 1 2 2 1 1 3 2 Turn the unit on and access the main menu as described on page 34. Select Settings using the Navigation Down button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to "Equalizer" using the Navigation Up 1 and/or Down 2 - Memorex MMP8620 | User Guide - Page 60
in the Play Queue. • Once you change from Shuffle mode to Normal, Repeat All or Repeat One mode, the playback sequence in the Play Queue will still reflect the Shuffle mode. You will need to select Songs, Artists, Albums, Playlists or Genre to playback again and resume to normal sequence. 60 - Memorex MMP8620 | User Guide - Page 61
SETTINGS MENU (CONTINUED) SETTING THE BRIGHTNESS 1 2 2 1 1 3 2 Turn the unit on and access the main menu as described on page 34. Select Settings using the Navigation Down button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to "Brightness" using the Navigation Up 1 and/or Down 2 - Memorex MMP8620 | User Guide - Page 62
" setting (Off; 1, 2, 5 or 10 minutes) using the Navigation Up 1 and/or Down 2 buttons, followed by the Enter/Play/Pause ®p button 3 to confirm. NOTE: This setting will turn off the display after the selected amount of time. Press the Menu button to go back to the Main menu. 62 - Memorex MMP8620 | User Guide - Page 63
30 seconds; or Always On) using the Navigation Up 1 and/or Down 2 buttons, followed by the Enter/Play/Pause ®p button 3 to confirm. NOTE: This setting will dim the display after the selected amount of time. Press the Menu button to go back to the Main menu. 63 - Memorex MMP8620 | User Guide - Page 64
SETTINGS MENU (CONTINUED) SETTING THE TIME 1 2 2 1 1 3 2 Turn the unit on and access the main menu as described on page 34. Select Settings using the Navigation Down button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to "Time Set" using the Navigation Up 1 and/or Down 2 buttons, - Memorex MMP8620 | User Guide - Page 65
SETTINGS MENU (CONTINUED) SETTING THE LANGUAGE 1 2 2 1 1 3 2 Turn the unit on and access the main menu as described on page 34. Select Settings using the Navigation Down button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to "Language" using the Navigation Up 1 and/or Down 2 - Memorex MMP8620 | User Guide - Page 66
Up 1 and/or Down 2 buttons, followed by the Enter/Play/Pause ®p button 3 to select it. 3 The "About" screen will display the device information such as the Firmware version, Int. (Internal) Total Memory, Int. (Internal) Used Memory, Int. (Internal) Free Memory, Ext. (External) Total Memory, Ext - Memorex MMP8620 | User Guide - Page 67
SETTINGS MENU (CONTINUED) TO RESTORE THE DEFAULT SETTINGS 1 2 2 1 1 3 2 Turn the unit on and access the main menu as described on page 34. Select Settings using the Navigation Down button 1, followed by the Enter/Play/Pause ®p button 2. Scroll to "Default" using the Navigation Up 1 and/or - Memorex MMP8620 | User Guide - Page 68
TO FORMAT THE PLAYER WARNING! Do not format this player unless it stops working and you are instructed to do so by technical support personnel. 1 select it. 3 2 1 NOTES: • If you format the unit, the unit will restart automatically. • To format the unit using your computer, please see page 71. - Memorex MMP8620 | User Guide - Page 69
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. No sound. The computer is not recognizing the player. CAUSE Battery is low/empty. Power is not turned on. Headphones are not inserted. Volume is set - Memorex MMP8620 | User Guide - Page 70
TROUBLESHOOTING GUIDE (CONTINUED) SYMPTOM No buttons work. Unit acting erratically. CAUSE SOLUTION The Lock feature is Deactivate Lock feature as activated. described on page 36. Unit needs to be reset Reset unit and/or or firmware needs to be update firmware, see updated. page 72. Unit - Memorex MMP8620 | User Guide - Page 71
instructed to do so by technical support personnel. 1. Use the USB cable to connect the player and the computer. 2. Double click on My Computer, then 1.84GB right click "MTP Player", "Aptitude", "MMP8620 , the player will not work properly. Then, click OK to confirm and the player will start to - Memorex MMP8620 | User Guide - Page 72
button, see page 6 for the button's location. FOR FIRMWARE UPGRADE Please visit our Web site at www.memorexelectronics.com to check if there is new firmware available. IMPORTANT NOTE: Before upgrading the firmware, please backup all of your media files on your computer. After upgrading, format the - Memorex MMP8620 | User Guide - Page 73
Built-in Memory Built-in Battery Max. Playtime Supported OS Operating Temperature 1.7 (W) x 3.4 (H) x 0.5 (D) inches 1.5 ounces USB 2.0 2GB Li-Polymer Rechargeable battery 390mAh approx. 20 hrs in Music Playback mode Windows ME, 2000, XP and Mac OS X 23° F to 104° F (-5° C to 40° C) Specifications - Memorex MMP8620 | User Guide - Page 74
PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE. FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT (954) 660-7100. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
 |
 |
TABLE OF CONTENTS
1
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FCC Declaration . . . . . . . . . . . . . . . . . . . . . . 3
EIA Guidelines. . . . . . . . . . . . . . . . . . . . . . . . 4
Location of Controls
. . . . . . . . . . . . . . . . . . . 6
Charging the Battery . . . . . . . . . . . . . . . . . . . 7
Installing the Software
................
8
•
Installing the MyDJ Plug-In. . . . . . . . . . . . 9
•
Installing Windows Media Player 10. . . . 11
•
Installing the MusicIP Mixer . . . . . . . . . . 14
•
Installing MediaCoder. . . . . . . . . . . . . . . 17
Downloading and Transferring Files . . . . . . 20
Using the Software
..................
25
•
Using the MyDJ Plug-In . . . . . . . . . . . . . 25
•
Using the MusicIP Mixer (Mac OS X). . . 27
•
Using the MusicIP Mixer (Win XP) . . . . . 29
•
Using MediaCoder . . . . . . . . . . . . . . . . . 32
Safely Remove Hardware . . . . . . . . . . . . . . 33
General Operation
...................
34
•
Turning the Power On/Off. . . . . . . . . . . . 34
•
Menu Button . . . . . . . . . . . . . . . . . . . . . . 34
•
Inserting/Removing an External
Memory Card (Mini SD) . . . . . . . . . . . . . 34
•
Headphones Jack. . . . . . . . . . . . . . . . . . 35
•
Volume Buttons
...................
35
•
Hold Switch. . . . . . . . . . . . . . . . . . . . . . . 36
•
Default/Full Screen . . . . . . . . . . . . . . . . . 36
Operation–Music Playback Mode
......
37
•
To Listen to MP3s/WMAs. . . . . . . . . . . . 37
•
To Delete Songs from the PlayQueue . . 39
•
High-Speed Music Search . . . . . . . . . . . 40
•
Forward/Reverse Skip
. . . . . . . . . . . . . . 40
•
Music Contextual Menu
. . . . . . . . . . . . . 41
•
Using the djScan Feature. . . . . . . . . . . . 45
•
Using the djMix Feature . . . . . . . . . . . . . 47
•
Using the djMoods Feature
. . . . . . . . . . 48
Operation–Video Playback Mode
.......
49
•
To Watch Videos. . . . . . . . . . . . . . . . . . . 49
•
High-Speed Video Search
. . . . . . . . . . . 50
•
Forward/Reverse Skip
. . . . . . . . . . . . . . 50
Operation–Photo Playback Mode
......
51
•
To View Photos. . . . . . . . . . . . . . . . . . . . 51
•
Thumbnail View
. . . . . . . . . . . . . . . . . . . 52
•
Slideshow View. . . . . . . . . . . . . . . . . . . . 52
Operation–FM Radio Mode
............
53
•
To Listen to the FM Radio
. . . . . . . . . . . 53
•
To Add/Load Presets
. . . . . . . . . . . . . . . 54
•
To Record the FM Radio
. . . . . . . . . . . . 54
Operation–Recorder Mode
............
55
•
To Create a Voice Recording . . . . . . . . . 55
•
To Delete a Recording . . . . . . . . . . . . . . 56
•
To Listen to a Recording. . . . . . . . . . . . . 56
Settings Menu
......................
57
Troubleshooting Guide
................
69
Formatting the Player
. . . . . . . . . . . . . . . . . 71
Resetting the Unit . . . . . . . . . . . . . . . . . . . . 72
Updating the Firmware
. . . . . . . . . . . . . . . . 72
Specifications
. . . . . . . . . . . . . . . . . . . . . . . 73