Memorex MP3851BLK User Guide - Page 13

OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 20 TRACKS) 1 2 1 2 With the power on and the unit in the CD Stop mode, press the MEMORY/PROGRAM button; "PROG" and "00" will blink in the display. Use the MIN/Skip/Search o 1 or HR/Skip/Search n 2 button to select the first track to be programmed. 3 2 4 Press the MEMORY/PROGRAM button again; the selected track has now been programmed and counted as program 1. 2 Repeat steps 2 and 3 to program the other desired tracks in sequence, up to 20 tracks. After you attempt to program more than 20 tracks, the program memory will be full and "--" will appear in the display. Press the PLAY/PAUSE (®/p) button to begin playback; "PROG" will blink and the tracks will play in the o2rder programmed. NOTES ON PROGRAMMED PLAY: • Programming is the ability to preselect the order in which a series of tracks will be played. • Each track may be stored in the program memory as many times as desired. • As each track is played, its track number will be displayed. You can move forward or backward through the programmed tracks with the MIN/Skip/Search o or HR/Skip/Search n button. • The unit will stop after all programmed tracks have been played or the STOP (I) button is pressed. • To stop Program playback, press the STOP (I) button. To playback the program again, while in the Stop mode press the MEMORY/PROGRAM button followed by the PLAY/PAUSE (®p) button. • To clear the program memories, while in the Stop mode press the MEMORY/PROGRAM button followed by the STOP (I) button. 12