Memorex MVD2045 User Guide - Page 1
Memorex MVD2045 - MVD 2045 DVD Player Manual
UPC - 749720009329
View all Memorex MVD2045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
MENU SYSTEM TO ACCESS THE MAIN MENUS: The setup menu lets you customize the DVD player by allowing you to select various language preferences, set up a parental level, turn captions and screen saver on and off, adjust what type of television screen you have and more. Below, find the menu, and then find the corresponding page that describes the features of the selected menu option. Enter the SETUP MENU by pressing the SETUP button. Use the Navigation buttons to navigate through the menus/screens and press the ENTER/PLAY ® button to select the highlighted option. To Exit the SETUP MENU, press the SETUP button. GENERAL SETUP TV DISPLAY: Your can choose a display that affects how a disc's content appears on your TV screen. Normal/PS (4:3 Standard): reproduces a 4:3 picture with some distortion. Normal/LB (4:3 Letterbox): gives best reproduction of pictures recorded in this format (i.e., with horizontal bands at the top and button of the screen) Wide (16:9 Widescreen): reproduces 16:9 format films in full, on a 16:9 screen. ANGLE MARK: Select ON to turn the angle marks on and OFF to turn them off. Anglemarks are not available on all DVDs. Dolby - - General Setup Page - - TV Display PS Angle Mark ON OSD Lang ENG Screen Saver ON HDMI Setup HDMI Audio PCM TVG Normal/PS Normal/LB Wide Set TV Display Mode OSD LANGUAGE: Select the desired language for the OnScreen display to display text. The DVD must have the language included in order to display it. SCREEN SAVER: When this option is set to ON, the screen saver will come on when the unit stops or the image is paused for approximately one minute. When this option is OFF, the screen saver will not come on. HDMI SETUP: Select the output resolution to correspond with your TV (480i, 480p, 720p (60Hz), 1080i (60Hz) or 1080p (60Hz). Refer to your TV's owner's manual for resolution. The setting can also be changed by pressing the HDMI/PS button. Note: If the TV screen is blank, press the HDMI/PS button repeatedly until the picture appears on the screen again. HDMI AUDIO: Select the desired audio format: SPDIF: No signal output for the coaxial output port. PCM: Select to hear the Digital Output in PCM format. SPEAKER SETUP DOWNMIX: LT/RT: Select to hear the sound in theatrical downmix mode. STEREO: Select to hear the sound in Stereo downmix mode. Dolby - - Speaker Setup Page - Downmix TVG LT/RT Stereo TV GUARDIAN (CONTINUED) TVGuardian® Setup 1. Activate the TVGuardian® function as described and enter the TV Guardian menu as described above. 2. Select OFF, TOLERANT, MODERATE, STRICT using the Navigation (π,†) buttons. NOTE If you select OFF, you will not able to select or activate the HELL/DAMN, RELIGIOUS, SEXUAL, CC MODE settings. 3. While in the TVGUARDIAN main menu, select HELL/DAMN, RELIGIOUS, SEXUAL using the Navigation (π,†) buttons. Press the ENTER/PLAY ® button to select Flt (Filter) or OFF (select Filter to activate the function). 4. While in the TVGUARDIAN main menu, select CC MODE using the Navigation (π,†) buttons, then push the ENTER/PLAY ® button to enter the CC MODE menu. Select OFF, ON MUTE or ON CONTINUOUS as desired Navigation (π,†) buttons. Press the ENTER/PLAY ® button to confirm the selection. NOTE: To exit the setup; press the SETUP button until the Setup menu disappears from the screen. TVGuardian® Mode Off ...No filtering Tolerant Filters only the most offensive foul language Moderate Increased standards for language filtering Strict Filters out all common offensive language Word Subset Filtering In addition to the main TVGuardian® Modes listed above, you can turn certain word subsets on or off according to your preferences. Damn and Hell Filters out variations of "Damn" and "Hell" Religious Filters out references to deity. (To watch religious programming, turn this word subset off.) Sexual Filters sexually explicit language CC Mode On Mute (Default Captions are displayed when offensive language is being filtered On Always Captions are displayed continually Off Captions are never displayed CC Channel To use the TVG® captioning features while watching a DVD Movie, your television must be capable of displaying closed captions. Make sure that your TV CC is set to "CC1" or "CC2" (Close caption on channel 1 or 2), and that the CC channel on your DVD player is set to "CC1" or "CC2"respectively (CC2 is the default setting.) SETUP HELP Select this option and press the ENTER/PLAY button to enter the TVG's Setup Help Menu to find more information on TV Channel Selection and the TVG Web site address. Press the ENTER/PLAY button to exit this option. DOLBY DIGITAL SETUP Set Downmix Mode DYNAMIC: Use to slider to set the Dynamic Range. Set to OFF to turn Dynamic Range Off. PREFERENCE SETUP AUDIO: Select the language the DVD will be played back in (ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE). The DVD must be recorded in the selected language, otherwise the Dolby - - Dolby Setup Page - Dynamic Dynamic Range Compression TVG FULL 3/4 1/2 1/4 OFF default language of the DVD will be played. SUBTITLE: Select the language the Subtitle (OSD) will be in (ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE, OFF). The DVD must be recorded in the selected language, otherwise - - Preference Page - - Audio Subtitle Disc Menu Password Default Dolby ENG ENG ENG TVG English French Spanish German Japanese the default language of the DVD will be shown. Preferred Audio Language DISC MENU: Select the language the DISC MENU will be in (ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE). The DVD's DISC MENU must be made in the selected language, otherwise the default language of the DVD will be shown. PASSWORD Select this option for password changing. Input your old password (the default password is 1234), then input the new password. Confirm the new password using the Number buttons, then press the ENTER/PLAY button again. The desired new password will then be set; be sure to write it down for future reference. Select this option to change the TVG® password. You must know the old password in order to change it. If you have forgotten the password, call customer service at the number listed on the Warranty. DEFAULT: Select this option to reset all the preferences (except PASSWORD) to their original factory settings. This is useful to reset the NTSC System. TV GUARDIAN This menu is protected by a password (the default password is 1234). The password can changed in PREFERENCE MENU. TV Guardian (TVG) filters out objectionable language by monitoring the closed captioning (CC) information contained on the DVD. When TVG® detects objectionable words or phrases, it mutes the audio and displays more appropriate "profanity free" phrases. It also offers various levels of filtering and is easily adjustable with simple on-screen menus. SPECIFICATIONS Power Requirements AC120V, 60Hz Power Consumption 15W (approx. 5W when set to Standby mode by remote) Weight ...2.5 Lbs Dimensions 17 (L) x 9 (W) x 1.7 (H) inches Weight and dimensions are approximate. Signal System...NTSC/PAL Operating Temperature 5° to +35°C Operating Humidity Range 5% to 90% (no condensation) Discs Played: DVD-VIDEO Disc ...12cm single-sided, single layer ...12cm single-sided, dual layer 12cm double-sided, single layer ...8cm single-sided, single layer ...8cm single-sided, dual layer ...8cm double-sided, single layer COMPACT DISC (VIDEO CD) ...12cm disc ...8cm disc Video Output Level ...1Vp-p Audio Output Level 2Vrms (1KHz, 0dB) Audio Signal Output Characteristics: Frequency Responses: DVD (Linear Audio 20Hz-20KHz (48KHz/96KHz sampling) CD Audio...20Hz-20KHz S/N Ratio ...70dB Wow and Flutter Below Measurable Level Pickup: Wavelength ...655nm Laser Power ...Class 1 Specifications are subject to change without notice. TO ACTIVATE: 1. Power on the unit, and the following dialog will appear, "Start using your TVGuardian foul language filter today! Press the SETUP button and select TVGuardian to enable filter. This Message will be displayed five times." 2. Press SETUP, move the cursor to the tab "TVG" and press ENTER button. A dialog and display registration key appears. You can access the TVG Menu after entering the correct Activation Code. To activate the TVGuardian® feature, either go to www.TVGuardian.com or call (866-8843458). Please have your "Registration Key" ready. Activation Once you have obtained your Activation Code, please use your remote control to enter the activation code. Once activated, you may use TVGuardian® for the life of your product. FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT (954) 660-7100 PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. FOR CONSUMER REPLACEABLE PART(S), SEE PART NUMBER(S) ON THE LOCATION OF CONTROLS, PAGE 2, AND THEN CONTACT FOX INTERNATIONAL AT 1-800-321-6993 Memcorp, inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.com 4 152-06510-0320 DVD Player User's Guide MVD2045 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This Caution Marking and Rating Label are located at the rear and bottom enclosure of the unit. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU'AU FOND. SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product. LASER WARNING: This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. The symbol for class II (Double Insulation) FCC NOTICE: This equipment complies with Class B digital device regulations. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION: To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the product and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 6. ATTACHMENTS Do not use attachments not recommended by the product's manufacturer as they may cause hazards. 7. WATER AND MOISTURE Do not use this product near water-for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool. 8. ACCESSORIES Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 8A. An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. 9. VENTILATION Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. POWER SOURCES This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 11.GROUNDING OR POLARIZATION This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. LIGHTNING To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 15. OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product. 17. OUTDOOR ANTENNA GROUNDING If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to grounding electrodes and requirements for grounding electrodes. 18. SERVICING Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. SAFETY CHECK Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21. WALL OR CEILING MOUNTING The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 22. DAMAGE REQUIRING SERVICE Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or the cabinet has been damaged. f. When the product exhibits a distinct change in performance-this indicates a need for service. 23. HEAT The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat. 24. NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE PRECAUTIONS NOTES ON HANDLING: • When shipping the DVD player, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory. • Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish. • The top and rear panels of the DVD player may become warm after a long period of use. This is normal and not a malfunction. • When the DVD player is not in use, be sure to remove the disc and turn off the power. • If you do not use the DVD player for a long period, the unit may not function properly in the future. Turn on and use the DVD player occasionally. NOTES ON CLEANING: Use a soft, dry cloth for cleaning. • For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the DVD player. • If you use a chemical-saturated cloth to clean the unit, follow that product's instructions. Warning: Cleaning and adjustment of lenses and/or other components of playback mechanism should be performed by a qualified service technician. NOTE ON LOCATING THE DVD PLAYER: When you place this DVD player near a TV, radio or VCR, the playback picture may become poor and the sound may be distorted. In this case, move the DVD player away from the TV, radio or VCR. NOTES ON MOISTURE CONDENSATION: Moisture condensation damages the DVD player. Please read the following carefully. • Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player. Moisture condensation occurs during the following cases: • When you bring the DVD player directly from a cold place to a warm place. • When you use the DVD player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit. • In summer, when you use the DVD player in a hot and humid place just after you moved the unit from an air conditioned room. • When you use the DVD player in a humid place. Do not use the DVD player when moisture condensation may occur. • If you use the DVD player in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the DVD player to the wall outlet, turn on the DVD player and leave it "ON" for two or three hours. After two or three hours, the DVD player will have warmed up and evaporated any moisture. Keep the DVD player connected to the wall outlet and moisture condensation will seldom occur. TO OBTAIN A CLEAR PICTURE: The DVD player is a high technology, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer. POWER SOURCE Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V, 60Hz. NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut the wide blade. It is the user's responsibility to have an electrician replace the obsolete outlet. AC Outlet AC Plug EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER 20ft 45 45 NOTES: • When there is an obstacle between the DVD and the transmitter, the transmitter may not operate. • When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the DVD, the remote operation may be unstable. 1