Miele S 8390 Kona Operating manual - Page 33
When to change the thread catcher of the standard floor brush 33, How to change the thread catcher 33
View all Miele S 8390 Kona manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
When to change the thread catcher of the standard floor brush The thread catcher on the standard floor brush can be replaced when the pile is worn out. How to change the thread catcher AllTeQ floor tool ^ With a screwdriver, for example, lift the thread catcher out of the slots. Two indents are provided for this purpose. ^ Insert the new thread catcher. AirTeQ floor tool ^ With a screwdriver, for example, lift the thread catcher out of the slots. ^ Insert the new thread catcher. New thread catcher pads can be purchased from any authorized Miele vacuum dealer or Miele. Cleaning the floor roller (not required with the AirTeQ floor tool) a Release the roller pin using a coin. b Push and take out the roller axle. c Take out the roller. ^ Remove all threads, hair etc. and reinstall the roller and lock the roller pin. Maintenance and care 33