Motorola BR700 User Manual - Page 19
Electrical Connection to Router, Easy Software Setup
UPC - 612572095348
View all Motorola BR700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
SECTION 2 INSTALLATION Electrical Connection to Router Your router does not have an On/Off power switch and therefore will only be powered on by plugging in the power adapter: Reset Power LAN To power supply 1 Connect the power adapter to the router's Power port, found on the back of the unit. 2 Then plug the power adapter into a grounded and surge protected power outlet. ! The Power LED on the front panel lights green when connected properly. Easy Software Setup Run the Installation Wizard program from the supplied CD-ROM to quickly setup your network. Once your network is up and running, refer to Section 3:Configuration for advanced configuration. Manual Software Setup If you'd prefer to manually setup your network, use this section to configure it. This section details the physical connection of the router to your network as well as the configuration needed by your PC. To set up your network: ! Physically connect and power on the router ! Configure your PCs If you don't want to use the Installation Wizard from the CD-ROM, follow the instructions below. For advanced configurations, refer to Section 3:Configuration. 2-6 SECTION 2, INSTALLATION