Motorola H555 User Manual - Page 4

EARHOOKS AND YOUR HEADSET Your H555 headset is supplied with multiple earhooks. The earhook is attached onto a hinge pin, and is placed onto your ear when using your headset. To install an earhook on your headset: 1 Open the attached earhook 90 degrees from the headset. 2 Gently lift and pull the top of the earhook up and off the upper hinge pin. Then, pull it away to remove it. 3 Position the headset for right or left ear use (right ear use is displayed). 1 Open Earhook 2 Pull Earhook Up Hinge Pin 4 Hook the bottom of the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin. CHANGING VOLUME BUTTON ORIENTATION You can also change the orientation of the volume buttons on your headset. 1 Turn the headset power off. 2 Press and hold the Volume button you want to assign as the "volume up" button and slide the switch toward the microphone. The indicator light is either steadily lit or flashing in blue. Volume Buttons Slide Switch WEARING THE HEADSET Once you have attached your desired earhook, follow these steps to wear your headset on your ear: 1 Open the attached 1 earhook 45 degrees from the headset. 2 Loop the earhook over your ear. 3 Press earhook to your ear. 2 When worn, your headset will look like this on your 3 head: European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with: • The essential requirements and other relevant provisions of Directive 1999/5/EC. • All other relevant EU Directives. Product Approval Number The above gives an example of a typical Product Approval Number. You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product's label in the "Search" bar on the web site.