Motorola IT6-2 Quick Start Guide

Step 3. Charge the handset

•

Place the handset on the base

and charge for at least 24

hours. When the handset is

fully charged, the

icon is

displayed.

IMPORTANT

You cannot access the battery in

the handset. Do not attempt to

remove the battery, as you may

damage the phone. If you need

to replace the battery, contact

customer service.

Step 1. Set up the base

•

Plug the power adapter into

the socket marked

on the

underside of the base and plug

the other end into the electrical

outlet.

NOTE

Position the base at least 6

feet away from other electrical

appliances to avoid interference.

Putting it as high as possible

ensures the best signal.

IMPORTANT

Only use the power and telephone

cables supplied with the product.

Step 2. Connect the charger

(Multi-pack only)

•

Plug the power adapter into

the socket marked

on the

underside of the charger and

plug the other end into the

electrical outlet.

If you have purchased a IT6-2

you will also have the following

additional items:

•

Additional handset and charger.

•

Power adapter for charger.

•

Telephone line cord

IMPORTANT

Only use the telephone line cord

supplied. This equipment is not

designed for making emergency

telephone calls when the power

fails. Alternative arrangements

should be made for access to

emergency services.

Warning! You cannot access the

battery in the handset.

BATTERY LOW WARNING

If you hear a warning beep every 2

minutes during a call, you will need

to recharge the handset before you

can use it again.

When charging,

icon will scroll

on the display.

BATTERY PERFORMANCE

In ideal conditions, a fully charged

battery should give up to 7 hours

talk time or up to 130 hours standby

time on a single charge.

1

Note that the new battery does not

reach the full capacity until it has

been put to normal use for several

days.

To keep the battery in the best

condition, leave the handset off the

base for a few hours at a time.

1

All talk and standby times are

approximate and depend on

features selected and usage

pattern

.

INTELLIGENT CHARGING

Your IT6 supports Intelligent

Charging, this means when the

handset is fully charged, the base

will automatically detect this

and stop drawing power from

the electrical outlet to charge

the handset, saving unnecessary

power usage.

Box Contents

Box Contents

Getting started

Display icons

Menu navigation

ON when the line is in use.

Flashes when there is an incoming call.

Flashes when you have missed calls and a new number(s) are in the

Calls list.

Handset ringer is OFF.

Steady when the handset is registered and within range of the base. Disappears

when the handset is out of range and flashes when searching for the base.

Flashes when you have new voicemail messages.

Off when you have no voicemail messages.

Phonebook is open.

The alarm clock has been set.

Hands-free mode is activated.

Answering machine is ON.

The approximate power levels of your battery are indicated as

below:

Battery is fully charged.

Battery is partially charged.

Battery is running low.

Battery is almost empty. The battery icon will flash and emit a warning

beep every 2 minutes during call.

Handset

Display

Call Log / Scroll Up /

Volume up

Open the Call log. Press

u

to enter Call Log menu and

then press

d

to select

Call

List

or

Answ machine

menu.

Scroll up through lists and

settings.

Menu / OK

Enter the main menu.

Select the option displayed

on screen.

Confirm menu option – OK

is displayed on screen.

Redial

Open the redial list.

Talk / Hands-free key

Make or answer a call.

Activate and deactivate

hands-free during a call.

IMPORTANT

Hands-free activation can

suddenly increase the

volume in the earpiece to a

very high level. Make sure

the handset is not too close

to your ear.

Pulse to Tone Dialling / * /

Keypad lock

During a call, press and hold

to switch from pulse dialling

to tone dialling.

Dial a *.

In standby mode press and

hold to lock/unlock the

keypad.

Scroll right / Clear / Mute

/ Back

Scroll to the right.

Delete characters on screen

when entering names and

numbers.

Mute / unmute the

microphone during a call.

Go back to previous menu

level

is displayed on

the screen.

End call / Switch handset

on/off

End a call.

When in a menu, go back to

standby mode.

Press and hold to switch

handset off (when in

standby) or on.

Intercom

Press to make an internal call.

Phonebook / Scroll Down /

Volume down

Open the phonebook.

Scroll down through lists and

menus.

Decrease the earpiece volume.

Ringer off / Flash / # /

Change case

Press and hold to switch

handset ringer on or off.

Use flash (F) functions.

Dial a #.

When entering letters

/ editing, short press to

change the case from Abc to

abc or ABC mode.

Pulse / Space

When dialling or storing a

number, press and hold to

enter a pause (P).

Microphone

Digital Cordless Telephone with

Answering Machine

IT6 Quick Start Guide

For IT6 and IT6-2

This Quick Start Guide provides all the information

you need to get you started. If you need more detailed

instructions, please refer to the full user guide available

in the IT6 box.

Alternatively, contact Customer Service at:

1-888-331-3383

.

IT6 base

IT6 handset

Power adapter for phone

base to electrical outlet

Guides

Telephone line cord

Warning: Charge the handset for 24 hours before use.

Motorola IT6

For IT6 and IT6-2

Digital Cordless Telephone

with Answering Machine

A

•

When the handset is fully

charged, plug the telephone

line cord into the socket marked

on the underside of the base

and plug the other end into the

telephone wall socket.

Step 4. Setting the date and

time:

If you have subscribed to a Caller ID

Service and Auto Clock is set to on

the

date and time is set automatically

for all handsets when you receive

your first call.

If you do not have a Caller ID

service, you can set the date and

time manually.

•

Press and scroll

d

to

Clock/Alarm

.

Press

M

. Display shows

Date &

Time

, then press

M

.

•

Enter the date using the format

MM/DD

e.g. 08/04 for August 4th.

•

Enter the time using the 12 hour

format

HH:MM

, e.g. 02:45.

•

Press

u

or

d

to change from

A

(am) to

P

(pm) and press

M

.

•

Press

e

to return to standby.

Earpiece

Navigating the menus

The basic steps of navigating through the menu and on-screen options.

•

From the standby screen, press

M

.

The main menu is opened.

•

Use the

(

u

) or

(

d

) keys to scroll through the menu.

•

Soft key options

OK

and

are displayed.

Press

M

to select

OK

and open a sub-menu or validate an option.

Press

b

to go back to previous menu level, correct a character or

cancel an action.

•

Press

e

to return to standby.

NOTE

If you do not press any button on the handset for 30 seconds the display

will automatically return to standby. It will also return to standby when the

handset is placed on the base or charger.

Motorola IT6-2 Quick Start Guide

Motorola IT6-2 Manual

Motorola IT6-2 manual content summary: