Motorola IT6-2 Quick Start Guide - Page 1

Digital Cordless Telephone with Answering Machine IT6 Quick Start Guide For IT6 and IT6-2 This Quick Start Guide provides all the information you need to get you started. If you need more detailed instructions, please refer to the full user guide available in the IT6 box. Alternatively, contact Customer Service at: 1-888-331-3383. Step 3. Charge the handset • Place the handset on the base and charge for at least 24 hours. When the handset is fully charged, the icon is displayed. IMPORTANT You cannot access the battery in the handset. Do not attempt to remove the battery, as you may damage the phone. If you need to replace the battery, contact customer service. • When the handset is fully charged, plug the telephone line cord into the socket marked on the underside of the base and plug the other end into the telephone wall socket. Step 4. Setting the date and time: If you have subscribed to a Caller ID Service and Auto Clock is set to on the date and time is set automatically for all handsets when you receive your first call. If you do not have a Caller ID service, you can set the date and time manually. • Press and scroll d to Clock/Alarm. Press M. Display shows Date & Time, then press M. • Enter the date using the format MM/DD e.g. 08/04 for August 4th. • Enter the time using the 12 hour format HH:MM, e.g. 02:45. • Press u or d to change from A (am) to P (pm) and press M. e • Press to return to standby. Box Contents IT6 handset IT6 base Power adapter for phone base to electrical outlet Telephone line cord Digital Cordless Telephone with Answering Machine Motorola IT6 For IT6 and IT6-2 Warning: Charge the handset for 24 hours before use. Guides Handset Display Call Log / Scroll Up / u Volume up Open the Call log. Press to enter Call Log menu and d then press to select Call List or Answ machine menu. Scroll up through lists and settings. Menu / OK Enter the main menu. Select the option displayed on screen. Confirm menu option - OK is displayed on screen. Redial Open the redial list. Talk / Hands-free key Make or answer a call. Activate and deactivate hands-free during a call. IMPORTANT Hands-free activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Pulse to Tone Dialling / * / Keypad lock During a call, press and hold to switch from pulse dialling to tone dialling. Dial a *. In standby mode press and hold to lock/unlock the keypad. Earpiece Microphone Scroll right / Clear / Mute / Back Scroll to the right. Delete characters on screen when entering names and numbers. Mute / unmute the microphone during a call. Go back to previous menu level is displayed on the screen. End call / Switch handset on/off End a call. When in a menu, go back to standby mode. Press and hold to switch handset off (when in standby) or on. Intercom Press to make an internal call. Phonebook / Scroll Down / Volume down Open the phonebook. Scroll down through lists and menus. Decrease the earpiece volume. Ringer off / Flash / # / Change case Press and hold to switch handset ringer on or off. Use flash (F) functions. Dial a #. When entering letters / editing, short press to change the case from Abc to abc or ABC mode. Pulse / Space When dialling or storing a number, press and hold to enter a pause (P). Box Contents If you have purchased a IT6-2 you will also have the following additional items: • Additional handset and charger. • Power adapter for charger. • Telephone line cord IMPORTANT Only use the telephone line cord supplied. This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. Warning! You cannot access the battery in the handset. BATTERY LOW WARNING If you hear a warning beep every 2 minutes during a call, you will need to recharge the handset before you can use it again. When charging, icon will scroll on the display. BATTERY PERFORMANCE In ideal conditions, a fully charged battery should give up to 7 hours talk time or up to 130 hours standby time on a single charge.1 Note that the new battery does not reach the full capacity until it has been put to normal use for several days. To keep the battery in the best condition, leave the handset off the base for a few hours at a time. 1All talk and standby times are approximate and depend on features selected and usage pattern. INTELLIGENT CHARGING Your IT6 supports Intelligent Charging, this means when the handset is fully charged, the base will automatically detect this and stop drawing power from the electrical outlet to charge the handset, saving unnecessary power usage. Display icons ON when the line is in use. Flashes when there is an incoming call. Flashes when you have missed calls and a new number(s) are in the Calls list. Handset ringer is OFF. Steady when the handset is registered and within range of the base. Disappears when the handset is out of range and flashes when searching for the base. Flashes when you have new voicemail messages. Off when you have no voicemail messages. Phonebook is open. The alarm clock has been set. Hands-free mode is activated. Answering machine is ON. The approximate power levels of your battery are indicated as below: Battery is fully charged. Battery is partially charged. Battery is running low. Battery is almost empty. The battery icon will flash and emit a warning beep every 2 minutes during call. Getting started Step 1. Set up the base • Plug the power adapter into the socket marked on the underside of the base and plug the other end into the electrical outlet. NOTE Position the base at least 6 feet away from other electrical appliances to avoid interference. Putting it as high as possible ensures the best signal. IMPORTANT Only use the power and telephone cables supplied with the product. Step 2. Connect the charger (Multi-pack only) • Plug the power adapter into the socket marked on the underside of the charger and plug the other end into the electrical outlet. A Menu navigation Navigating the menus The basic steps of navigating through the menu and on-screen options. • From the standby screen, press M. The main menu is opened. • Use the (u) or (d) keys to scroll through the menu. • Soft key options OK and are displayed. Press M to select OK and open a sub-menu or validate an option. b Press to go back to previous menu level, correct a character or cancel an action. e • Press to return to standby. NOTE If you do not press any button on the handset for 30 seconds the display will automatically return to standby. It will also return to standby when the handset is placed on the base or charger.