Motorola K370-ALR1211100USR Quick Reference Guide - Page 5

Quick Reference Guide 5 Scan the Entire Symbol - The scan beam must cross every bar and space on the symbol (as in the left bar code below). - Hold the scanner farther away for larger symbols. - Hold the scanner closer for symbols with bars that are close together. Changing the Battery When a battery is fully charged, it generally lasts up to 10 hours without being returned to the cradle. By returning it to the cradle during the day, this time is extended. If a significant decrease in battery life is noticed and does not correspond to increased usage, consider replacing the battery. Removing the Battery 1. Slide the battery release latch down using center indent and remove the battery compartment cover. 2. Slide the battery toward the bottom of the scanner and then pull the bottom of the battery back and out of the scanner. Battery Compartment Cover Battery Release Latch Replacing the Battery 1. Place the top portion of the battery (curved side up, contacts toward top) into the scanner and then slide it up the handle. 2. Replace the battery compartment cover. 3. Slide the release latch up to secure the cover in place.