Motorola L601M User Guide - Page 17

ENGLISH 3.15 Setting the dial mode The default dialing mode is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so. 1. Press MENU and then VOL+ or REDIAL/VOL- to select SETUP BS. 2. Press MENU to select DIAL MODE. 3. Press MENU and then VOL+ or REDIAL/VOL- to select TONE or PULSE. 4. Press MENU to save. NOTE If the pulse mode is selected, press */TONE to switch from pulse to tone dialing temporarily when dialing out. After the call is ended, the dial mode will change back to pulse. 3.16 Setting the flash time The default flash time is 600MS. It is unlikely that you should need to change this setting unless advised to do so. 1. Press MENU and then VOL+ or REDIAL/VOL- to select SETUP BS. 2. Press MENU and then VOL+ or REDIAL/VOL- to select FLASH TIME. 3. Press MENU and then VOL+ or REDIAL/VOL- to the flash time you want. (8 options are available : 90, 100, 110, 250, 300, 400, 600 and 700MS) 4. Press MENU to save. 3.17 Setting the area code 1. Press MENU and then VOL+ or REDIAL/VOL- to select SETUP BS. 2. Press MENU and then VOL+ or REDIAL/VOL- to select AREA CODE. 3. Press MENU and then enter the area code. 4. Press MENU to save. 3.18 Registration 3.18.1 Registering a handset Up to 5 handsets can be registered to one base. The original handset is pre-registered to use. Additional handsets must be registered to the base before you can use them. To register an additional handset, 1. Press MENU and then VOL+ or REDIAL/VOL- to select SETUP HS. 2. Press MENU and then VOL+ or REDIAL/VOL- to select REGISTRATION. 3. Press MENU and then VOL+ or REDIAL/VOL- to select YES or NO. 4. Select YES then press MENU to enter the registration procedure as follows: 1. Press and hold FIND for around 4 seconds on the base. 2. Place the unregistered cordless handset on the base or charger. Using the phone 17