Motorola MOTORAZR V3m Verizon User Guide - Page 13

Master Volume setting, regardless of which ring style you have set. The phone changes back to your selected ring style when you disconnect the charger. To charge using the charger: 1 Insert the charger into the USB connector on your phone as shown. 2 Plug the other end of the charger into the appropriate electrical outlet. The battery indicator N flashes while your phone is charging. 3 When your phone is turned on with the charger attached, the charge complete message will flash on the display for two seconds and then the battery meter symbol will stop flashing when your phone is fully charged. If your phone is turned off with the charger attached, the charge complete message will stay on the display when your phone is fully charged. Remove the charger. Tip: You can safely leave the charger connected to the phone after charging is complete. This will not damage the battery. When you charge the battery, the battery level indicator in the upper right corner of the display shows charging progress. At least one segment of the battery level indicator must be visible to ensure full phone functionality while charging. To charge from your PC, connect a cable from your phone's mini-USB port to a highpower USB port on a computer (not a lowpower one such as the USB port on your keyboard or bus-powered USB hub). Typically, essentials 11