Motorola WS-2000-SME-WW CLI Guide - Page 48
Network AP set Commands
View all Motorola WS-2000-SME-WW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3-12 WS2000 Wireless Switch System Reference Guide 3.2.9 Network AP set Commands set Network AP Commands Sets Access Port parameters. Syntax set [beacon|ch_mode|div|dtim|loc|name|primary|rate| reg|rts|short-pre|802.1x|ap_scan|mac|radio_type| ap_type|sip_cac_mode|allowed_sip_session] Parameters beacon intvl Sets the beacon interval for Access Port (1-12) to in K-us (50- 200). ch_mode [fixed|random|auto] Sets the channel mode for Access Port (1-12) to fixed, random or auto. div Sets the default antenna diversity to (one of full, primary, or secondary). dtim [|
3-12
WS2000 Wireless Switch System Reference Guide
3.2.9
Network AP set Commands
set
Network AP Commands
Sets Access Port parameters.
Syntax
set [beacon|ch_mode|div|dtim|loc|name|primary|rate|
reg|rts|short-pre|802.1x|ap_scan|mac|radio_type|
ap_type|sip_cac_mode|allowed_sip_session]
Parameters
beacon intvl
<idx> <interval>
Sets the beacon interval for Access Port
<idx>
(
1
–
12
) to
<interval>
in K-us (
50
–
200
).
ch_mode <idx>
[fixed|random|auto]
Sets the channel mode for Access Port
<idx>
(
1
–
12
) to
fixed
,
random
or
auto
.
div <idx> <mode>
Sets the default antenna diversity to
<mode>
(one of
full
,
primary
, or
secondary
).
dtim <idx>
[<period>|<bss_idx
<period>]]
Sets the DTIM period for Access Port <idx> to <period> (number of beacons from
1
–
50
).
<bss_idx>
is the index of the BSSID. If not specified for the AP300, the default
value of 1 is assumed for this parameter. For other APs, the
<period>
value is
used for all the BSSIDs.
loc <idx> <loc>
Sets Access Port
<idx>
location description to
<loc>
(
1–13
characters).
name <idx> <name>
Sets Access Port <idx> name to <name> (1–13 characters).
primary <idx> <widx>
Sets the primary WLAN
<widx>
(the WLAN index from
1
to
8
) for 802.11a radio
associated with Access Port
<idx>
(
1-12
). The ESS ID configured for this WLAN
will be used in the 802.11a beacon as the primary ESS.
Note:
This parameter is used only for AP200 APs with 802.11a radios
rate <idx> <basic>
<supported>
Sets Access Port
<idx>
(
1-12
) basic and supported rates.
<basic>
and
<supported>
must be comma-separated lists of rates, such as 6,9,11,15 with
no spaces. Basic rates are a subset of supported rates. The different types of
radio support the following rates.
A - 6|9|12|18|24|36|48|54
B - 1|2|5.5|11
G - 1|2|5.5|6|9|11|12|18|24|36|48|54
Note:
For a G radio, basic rates must be a subset of B Rates in order to associate legacy
B stations.
reg <idx> <indoor> <ch>
<pwr>
Sets Access Port
<idx>
(
1-12
)regulatory parameters, which
<indoor>
is one of
in
or
in/out
;
<ch>
is the channel to use, and
<pwr>
is the power (in dB from
4
to
20
). Select the value of
<ch>
from the appropriate list.
802.11b ch -- 1 to 14
802.11a ch -- 36,40,44,48,52,56,60,64,149,153,157,161
Note:
Regulatory parameter values depend on country of operation and radio type. Refer
to documentation for regulatory information.
rts <idx> <bytes>
Sets the RTS threshold for Access Port
<idx>
(
1-12
) to
<bytes>
(e.g., 2341).