Mr. Coffee BVMC-EHX33 User Manual - Page 8

Brewing Coffee Now

Page 8 highlights

2. Place a 10-12 cup paper basketstyle filter or a MR. COFFEE® permanent filter into the removable filter basket (Figure 5). NOTE: If using paper filters, it is important that the sides of the filter fit flush against the side of the filter basket. If filter collapse occurs, dampen the filter before placing in the filter basket and adding Figure 5 ground coffee and water. 3. Add the desired amount of coffee and gently shake to level the coffee. See the Suggested Coffee Measurement Chart. 4. If you are using water filtration system, place the MR. COFFEE® water filter in the basket, making sure that the side marked "this side up" faces you and that the water filter is level. 5. Be sure the removable filter basket is properly centered and all the way down in the brew basket and close the lid. 6. Fill the carafe with cold, fresh water to the desired capacity (1 cup equals 5 ounces) For easy and accurate filling, the water markings on the glass carafe and on the dual water windows show the amount of water needed to make the corresponding desired number of cups. Do not fill past the "12 cup MAX line" or water will flow out of the overfill hole in the back of the coffeemaker. The amount of coffee brewed will always be slightly less than the amount of water poured in the water 14 reservoir. This is due to the minimum absorption of water by the coffee grounds. 7. Lift the pour through reservoir lid and pour the water into the water reservoir. Close the lid and place the empty carafe onto the warmer plate. NOTE: Make sure the carafe is fully placed on the warming plate or the water and the grounds will overflow from the filter basket. An overflow may cause personal injury or damage to property. CAUTION! To reduce the risk of damaging the carafe and/or the risk of personal injury, do not add cold water to the carafe if the carafe is already hot. Allow the carafe to cool before using. BREWING COFFEE NOW 1. After completing the steps in the Adding Water and Coffee section and with the glass carafe and the filter basket securely in place, turn the coffeemaker on by pressing the SELECT button once. The BREW NOW and REGULAR green light will turn on to signal that the coffeemaker is on and brewing (Figure 6). 2. To enjoy a more full flavored cup of coffee, press the Brew Strength Figure 6 button once. The STRONG Brew Strength amber light will turn on. The coffeemaker will remain in the Brew Strength you have selected until you change it back to REGULAR strength by pressing the Brew Strength button or until you unplug the machine (Figure 7). Figure 7 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

reservoir. This is due to the minimum absorption of
water by the coffee grounds.
7. Lift the pour through reservoir lid and pour the
water into the water reservoir. Close the lid and
place the empty carafe onto the warmer plate.
NOTE:
Make sure the carafe is fully placed on the
warming plate or the water and the grounds will
overflow from the filter basket. An overflow may cause
personal injury or damage to property.
CAUTION!
To reduce the risk of damaging the
carafe and/or the risk of personal injury, do
not add cold water to the carafe if the carafe
is already hot. Allow the carafe to cool before
using.
BREWING COFFEE NOW
1. After completing the steps in the
Adding Water and
Coffee
section and with the glass carafe and the
filter basket securely in place, turn the
coffeemaker on by pressing the SELECT
button once. The BREW NOW and
REGULAR green light will turn on to signal
that the coffeemaker is on and brewing
(Figure 6).
2. To enjoy a more full flavored cup
of coffee, press the Brew Strength
button once. The STRONG Brew
Strength amber light will turn on. The
coffeemaker will remain in the Brew
Strength you have selected until you
change it back to REGULAR strength by
pressing the Brew Strength button or
until you unplug the machine (Figure 7).
14
15
2.
Place a 10-12 cup paper basket-
style filter or a MR. COFFEE
®
permanent filter into the
removable filter basket (Figure
5).
NOTE:
If using paper filters, it is
important that the sides of the
filter fit flush against the side of
the filter basket. If filter collapse
occurs, dampen the filter before
placing in the filter basket and adding
ground coffee and water.
3.
Add the desired amount of coffee and gently shake
to level the coffee. See the
Suggested Coffee
Measurement Chart
.
4.
If you are using water filtration system, place the MR.
COFFEE
®
water filter in the basket, making sure that
the side marked “this side up” faces you and that
the water filter is level.
5.
Be sure the removable filter basket is properly
centered and all the way down in the brew basket
and close the lid.
6. Fill the carafe with cold, fresh water to the
desired capacity (1 cup equals 5 ounces) For
easy and accurate filling, the water markings on
the glass carafe and on the dual water windows
show the amount of water needed to make the
corresponding desired number of cups. Do not fill
past the “12 cup MAX line” or water will flow out of
the overfill hole in the back of the coffeemaker.
The amount of coffee brewed will always be slightly
less than the amount of water poured in the water
Figure 5
Figure 6
Figure 7