NEC 1090025 Hardware Manual - Page 25
Installation, System Preparation, Unpacking, Before Installing, Site Requirements, Single Line - phones
UPC - 961613053657
View all NEC 1090025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installation Installation System Preparation System Preparation Unpacking Unpack the equipment and check it against your equipment lists. Inspect for physical damage. If you are not sure about a component's function, review Components (page 1). Contact your Sales Representative if you have additional questions. Have the appropriate tools for the job on hand, including: a test set, a punch down tool and a digital voltmeter. Before Installing Make sure you have a building plan showing the location of the common equipment, extensions, the telco demarcation and earth ground. In addition, the installation site must meet the requirements outlined in the Standard Practices Manual. Site Requirements The common equipment is contained in the wall-mounted Main Equipment Cabinet. Choose a central location for the cabinet that allows enough space for the equipment - and provides enough room for you to comfortably work. Figure 1: Installation Layout, DSX-40 (page 20) and shows you about how much space your system requires. Single Line Telephone REN Limitations Please note the following when installing single line telephones: ❥ The total Ringer Equivalence Number (REN) per system cannot exceed 10. ❥ The total REN per analog port cannot exceed 5. ❥ Ringer Equivalence is cumulative. ❥ A REN of 1 is the normal for an industry standard 2500 set with electromechanical ringer. Many phones with electronic ringers have significantly lower RENs. DSX-40 Hardware Manual Installation ◆ 19