NEC AS171-BK AccuSync AS191-BK : user's manual - Page 14
Specifications - AS191 - accusync lcd
UPC - 805736033038
View all NEC AS171-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Specifications Monitor Specifications AccuSync AS191 Monitor Notes LCD Module Diagonal: 48.3 cm/19.0 inches Viewable Image Size: 48.3 cm/19.0 inches Native Resolution (Pixel Count): 1280 x 1024 Active matrix, thin film transistor (TFT) liquid crystal display (LCD); 0.294 mm dot pitch; 250 cd/m2 white luminance, 900:1 contrast ratio, typical. Input Signal 15pin Mini D-sub: Analog RGB Sync DVI-D Digital RGB 0.7 Vp-p/75 ohms Separate sync. TTL level (Positive/Negative) DVI(HDCP) Display Colors Analog input: 16.7 M Depends on display card used. Viewing Angle Left/Right: -80°/+80° (CR>10) Up/Down: -80°/+80° (CR>10) Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz Vertical: 56 Hz to 76 Hz Automatically Automatically Resolutions Supported Landscape: 720 x 400*1: VGA text Some systems may not support all 640 x 480*1 at 60 Hz to 75 Hz modes listed. 800 x 600*1 at 56 Hz to 75 Hz 832 x 624*1 at 75 Hz 1024 x 768*1 at 60 Hz to 75 Hz 1152 x 864*1 at 75 Hz 1152 x 870*1 at 75 Hz 1280 x 960*1 at 60 Hz to 75 Hz Recommended resolution is 60 Hz for 1280 x 1024 at 60 Hz to 75 Hz optimal display performance. Active Display Area Horizontal: 376 mm Vertical: 301 mm Power Supply 100 - 240 V ~ 50/60 Hz Current Rating 0.5 - 0.3 A Power Maximun Operation: 24 W Consumption Normal Operation: 20 W Dimensions Landscape: 412.5 mm (W) x 403.1 mm (H) x 205.1 mm (D) 16.2 inches (W) x 15.9 inches (H) x 8.1 inches (D) Weight 4.4 kg (9.7 lbs) Environmental Considerations Operating Temperature: Humidity: Altitude: Storage Temperature: Humidity: Altitude: 5°C to 35°C/41°F to 95°F 20% to 80% 0 to 2,000 m/0 to 6,562 Feet -10°C to 60°C/14°F to 140°F 10% to 85% 0 to 12,192 m/0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. English-12