NEC AS173M-BK User Manual - English - Page 14
Connections, Connecting Video
View all NEC AS173M-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connections Video Input Connections • VGA (mini D-Sub 15-pin) - Analog video signal connection to a computer. Video only, no audio signal. • HDMI - High definition digital video and audio signal connection to a computer, streaming media player, Blu-ray player, game console, etc. • DisplayPort (DP) - High definition digital video and audio signal connection to a computer. Connecting Video The type of video connections that can be used to connect to a computer depends on the computer's display adapter. The following table shows the typical factory preset signal timing for each connection type. Some display cards may not be able to support the required resolution for proper image reproduction with the selected connection. The monitor will show the proper image by automatically adjusting the factory preset timing signal. Resolution H V 640 x 480 720 x 400 720 x 480 720 x 576 800 x 600 1024 x 768 1280 x 960 1280 x 1024 Vertical Frequency 60/72/75 Hz 70 Hz 60 Hz 50 Hz 56/60/72/75 Hz 60/70/75 Hz 60/75 Hz 60/75 Hz Scan Type Notes p p p p p SVGA p XGA p p SXGA, Recommended (60 Hz) p: Progressive. NOTE: When the selected monitor resolution is not a native panel resolution, the text contents appearance in the monitor screen is expanded in a horizontal or vertical direction to show the non-native resolution to full screen. This expansion is done by interpolated resolution technologies, which are normal and widely used in flat panel devices. Connecting to a Computer with HDMI • Please use an HDMI cable with the HDMI logo. • It may take a moment for the signal to appear after turning on the computer. • Some display cards or drivers may not display an image correctly. • If the monitor's power is turned on after a connected computer is turned on, sometimes an image is not displayed. In this case, please turn off the computer then turn it on again. Connecting to a Computer with DisplayPort • Please use a DisplayPort cable with the DisplayPort compliance logo. • It may take a moment for the signal to appear after turning on the computer. • When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear. • Some DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock. • If the monitor's power is turned on after a connected computer is turned on, sometimes an image is not displayed. In this case, please turn off the computer then turn it on again. English−12