NEC AS221WM AccuSync AS191WM-BK : user's manual - Page 9
Removing the Base, Connecting a Flexible Arm, Specifications
UPC - 805736031737
View all NEC AS221WM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Non-abrasive surface Figure R.1 Figure R.2 Figure R.3 Removing the Base NOTE: Always remove the Base when shipping the LCD. 1. Place monitor face down on a non-abrasive surface (Figure R.1). 2. While using your fingers, press the 3 locking tabs of left or right side at the same time to unlock the Base. 3. While using your fingers, press the 3 locking tabs of another side at the same time to unlock the Base. 4. Pull out the unlocked Base. Locking tabs Connecting a Flexible Arm This LCD monitor is designed for use with a flexible arm. Please use screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which, guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). NOTE: The mounting stand shall be able to sustain at least 21 kg and UL certified. 12 mm M4 4 x 12 mm with lock washer and flat washer Thickness of Bracket (Arm) 2.0 ~ 3.2 mm 100 mm Tighten all screws Specifications 4-SCREWS (M4) (MAX depth: 10 mm) If use other screw, check depth of hole. 100 mm Weight of LCD assembly: AS191WM: 4.3 kg (MAX) AS221WM: 4.9 kg (MAX) English-7