NEC AS241F-BK User Manual - English - Page 16
To connect the monitor to your system, follow these instructions°
View all NEC AS241F-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
To connect the monitor to your system, follow these instructions: NOTE: Make sure to read "Recommended Use" on page 3 before installation. 1. Turn off the power to your computer. 2. Place the monitor face down on a non-abrasive surface. 3. Connect devices to the monitor. HDMI Audio IN DisplayPort D-SUB Headphone Power cord CAUTION: Use the provided specified cables with this product so as not to interfere with radio and television reception. For DisplayPort and HDMI, please use a shielded signal cable. Use of other cables and adapters may cause interference with radio and television reception. CAUTION: • Do not connect headphones to the monitor while you are wearing them. Depending on the volume level, it may damage your ears and cause loss of hearing. NOTE: • Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level. • Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor lowers the sound. • Incorrect cable connections may result in irregular operation, damage display quality/components of the LCD module and/or shorten the module's life. 4. Connect the power cord to a power outlet. NOTE: • Please refer to the Caution section of this manual for proper selection of the AC power cord (see page 1). • Please make sure that enough power is supplied to the monitor. Please refer to "Power Supply" in the "Chapter 4 Specifications" on page 23. 5. Turn on the monitor by pressing the button and then turn on the computer. NOTE: If you have any problems please refer to the Troubleshooting section of this User's Manual (see page 20). English−14