NEC HT510 HT510 IG
NEC HT510 - DLP Projector - 1000 ANSI Lumens Manual
 |
UPC - 050927248207
View all NEC HT510 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC HT510 manual content summary:
- NEC HT510 | HT510 IG - Page 1
HT510 Installation Guide Floor and Ceiling Manual Focus/Manual Zoom Lens Shift: Vertical, Manual Focal Length: 19.5mm - 23.0mm F/#: 2.0 - 2.48 Notes • For screen sizes not indicated in the projection charts, use the formulas below. • The ceiling must be strong enough to support the projector - NEC HT510 | HT510 IG - Page 2
show the relationship between projector position and the screen. Center 1.5" *Factory Preset is B(max) Note: Mount shown is NEC HT40CM. Distance charts for popular 16:9 screens Minimum Lens Shift Screen - 13.3 15.7 - 13.3 15.7 - 13.3 15.7 - 13.3 www.necvisualsystems.com HT510 Page 2 of 7 - NEC HT510 | HT510 IG - Page 3
Diagrams and Distance Charts (cont.) The following diagrams show the relationship between projector position and the screen. Refer to the chart below for data. Distances 15.8 - 13.4 15.8 - 13.4 15.8 - 13.3 15.8 - 13.3 15.7 - 13.3 15.7 - 13.3 15.7 - 13.3 www.necvisualsystems.com HT510 Page 3 of 7 - NEC HT510 | HT510 IG - Page 4
Cabinet Dimensions The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. 4.94 4.76 13.60 13.27 3.11 3.17 (focus) 4.45 4.49 (boss) 4.69 5.24 (from foot to button) 0.0197 (button) www.necvisualsystems.com 2.07 5.30 HT510 Page 4 of 7 - NEC HT510 | HT510 IG - Page 5
Max for Mount 5.81 (boss) 8.05 (boss) 1.77 1.24 (foot) www.necvisualsystems.com M4x8 Max for Mount 1.12 (boss) 1.61 (foot) 3.86 (boss) 1.18 (boss) HT510 0.33 (lens) Page 5 of 7 - NEC HT510 | HT510 IG - Page 6
Optional Ceiling Mount Dimensions (Model #: HT40CM) The following drawings show ceiling mount dimensions. Dimensions are in inches. For millimeters multiply by 25.4. The accessories at (800) 865-2112. 1.5" NPT 0.406 9.33 3.17 2.67 6.16 Standoffs www.necvisualsystems.com 0.50 HT510 Page 6 of 7 - NEC HT510 | HT510 IG - Page 7
the commands above. Note: Contact your NEC rep for codes not listed. Cable Connection to set the projector to "Idle Mode" in the Setup menu for best projector. NOTE 3: For long cable runs it is recommended to set communication speed within projector menus to 9600 bps. Digital Light Processing, DLP
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
www.necvisualsystems.com
HT510
Page 1 of 7
NEC Solutions (America), Inc.
Visual Systems Division
HT510 Installation Guide
Floor and Ceiling Configuration
v1.2
Contents
Product Description, Lens Specs, Screen/Aspect Ratio,
Notes and Formulas
Pg 1
Diagrams & Distance Charts;
Ceiling Mounted
Pg 2
Floor
Pg 3
Cabinet Dimensions;
Top, Front and Right
Pg 4
Bottom, Back and Left
Pg 5
Ceiling Mount Dimensions
Pg 6
Input Panel and Control Codes
Pg 7
Product Description
Type:
1 chip DMD
TM
projector
Color Wheel: 5 Segments (2x)
Resolution:
1024 x 576 (16:9 native)
Dimensions:
7.36”(W) x 5.24”(H) x 13.60”(D)
Brightness:
1000 ANSI Lumens
Weight:
6.6 lbs
Contrast Ratio:
1200:1
Lens Specifications
Throw Ratio:
1.37 - 1.63:1 (approximate)
Manual Focus/Manual Zoom
Offset Angle:
Min. Lens Shift 5.4
°
- 6.4
°
(for 100” Diag)
Lens Shift: Vertical, Manual
Max. Lens Shift 13.4
°
- 15.8
°
(for 100” Diag)
Focal Length: 19.5mm – 23.0mm
Screen Sizes:
30”-200” diagonal (16:9)
F/#:
2.0 – 2.48
Notes
•
For screen sizes not indicated in the projection charts, use the formulas below.
•
The ceiling must be strong enough to support the projector and the installation must be in accordance with any local
building codes.
•
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary
±
5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projector placement, determine the image width for a
desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the image width for “W” in the
Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2.
Definitions:
16:9 Screen Formulas:
W
= Image Width
W
= H x 16/9
H
= Image Height (Size)
H
= W x 9/16
B
= Vertical distance between lens center and screen center
Screen Diagonal
= W x 18.35756/16
C
= Throw distance
Projection Formulas:
B
(min)
= 0.1543W
B
(max) = 0.3870W
C
(wide) = 1.3908W – 1.967
C
(tele)
= 1.6511W – 1.945
α
(
wide) = tan
-1
(B/C(wide))
α
(tele)
=
tan
-1
(B/C(tele))
Note:
Factory preset
is B(max)/maximum lens shift.