NEC NP-PX800X-08ZL User Manual
NEC NP-PX800X-08ZL Manual
 |
View all NEC NP-PX800X-08ZL manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC NP-PX800X-08ZL manual content summary:
- NEC NP-PX800X-08ZL | User Manual - Page 1
Projector PX750U/PX700W/PX800X User's Manual Model No. NP-PX750U, NP-PX750UG, NP-PX700W, NP-PX700WG, NPPX800X, NP-PX800XG • The projector's Model No. indicated on the projector's label is NPPX750U, NP-PX750UG, NP-PX700W, NP-PX700WG, NP-PX800X, and NP-PX800XG respectively. Each model is referred - NEC NP-PX800X-08ZL | User Manual - Page 2
to change without notice. (3) Great care has been taken in the preparation of this user's manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters - NEC NP-PX800X-08ZL | User Manual - Page 3
this manual carefully before using your NEC projector and keep the manual handy ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the provided. The information should be read carefully to avoid problems. WARNING: TO PREVENT FIRE OR SHOCK, DO NOT - NEC NP-PX800X-08ZL | User Manual - Page 4
those specified by NEC Display Solutions of America, Inc. in this manual. Failure to please contact your supplier. Important Safeguards These safety instructions are to ensure the long life of your addition, the ceiling must be strong enough to support the projector and the installation must be in - NEC NP-PX800X-08ZL | User Manual - Page 5
projector, disconnect it immediately and have the object removed by a qualified service personnel. • Do not place any objects on top of the projector operate on a power supply of 100-240V AC 50/60 Hz (PX750U/PX700W/PX800X)/200240V AC 50/60Hz (PX750UG/PX700WG/PX800XG). Ensure that your power supply - NEC NP-PX800X-08ZL | User Manual - Page 6
the projector does not operate normally when you follow the instructions described in this user's manual. - If the projector has been dropped or the • Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged. • - NEC NP-PX800X-08ZL | User Manual - Page 7
Laws. Lamp and Color Wheel Replacement • Use the specified lamp for safety and performance. • To replace the lamp and the color wheel, follow all instructions provided on page 174 and 209 respectively. • Be sure to replace the lamp when the message [THE LAMP HAS REACHED THE END OF ITS USABLE - NEC NP-PX800X-08ZL | User Manual - Page 8
Important Information Example 2 - If there is a wall behind the projector. (1) For floor installation: 70 cm/27.6" or greater Lens NOTE: The drawing shows the proper clearance required for the back, sides and top of the projector. (2) For ceiling mounting: Ceiling mount unit 30 cm/12" or - NEC NP-PX800X-08ZL | User Manual - Page 9
Important Information Orientation and Fan Mode • When changing the projector orientation, also change the [SETTING] option of [FAN MODE] accordingly. Failure to do so may cause product malfunction. About Copyright of original projected pictures: Please note that using this projector for the - NEC NP-PX800X-08ZL | User Manual - Page 10
the Box?...1 Introduction to the Projector...2 Congratulations on Your Purchase of the Projector...2 Features you'll enjoy:...2 About this user's manual...3 Part Names of the Projector...4 Front/Top...4 Rear...5 Control Panel/Indicator Section...6 Terminal Panel Features...7 Part Names of the - NEC NP-PX800X-08ZL | User Manual - Page 11
Table of Contents Checking Energy-Saving Effect [CARBON METER]...34 Using the Optional Remote Mouse Receiver (NP01MR)...35 Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]...37 Cornerstone...37 Displaying Two Pictures at the Same Time...40 Selecting the PIP or PICTURE BY - NEC NP-PX800X-08ZL | User Manual - Page 12
Table of Contents VIEWER...97 NETWORK...97 SLOT (for optional board)...97 ENTRY LIST...97 TEST PATTERN...97 5 Menu Descriptions & Functions [ADJUST]...101 [PICTURE]...101 [IMAGE OPTIONS]...104 [VIDEO]...108 Using the Lens Memory Function [LENS MEMORY]...109 6 Menu Descriptions & Functions [SETUP]... - NEC NP-PX800X-08ZL | User Manual - Page 13
216 Electrical...216 Mechanical...217 Option lens...218 Cabinet Dimensions...219 Pin Assignments of D-Sub COMPUTER Input Connector...220 Troubleshooting...221 Indicator Messages...221 Common Problems & Solutions...223 If there is no picture, or the picture is not displayed correctly...225 xi - NEC NP-PX800X-08ZL | User Manual - Page 14
Table of Contents PC Control Codes and Cable Connection...226 Troubleshooting Check List...227 TravelCare Guide...229 xii - NEC NP-PX800X-08ZL | User Manual - Page 15
for AC 200 V) (EU: 79TM1021) NEC Projector CD-ROM User's manual (PDF) and the utility software (7N951651 ) • Important Information (For North America: 7N8N1991) (For Other countries than North America: 7N8N1991 and 7N8N2001) • Quick Setup Guide - NEC NP-PX800X-08ZL | User Manual - Page 16
10), PX700W: WXGA (1280 × 800) native resolution (16:10), PX800X: XGA (1024 × 768) native resolution (4:3) This projector supports 6 support component inputs.) The projector's HDMI and DisplayPort input connectors support HDCP. The projector has a slot for the optional board (SB-01HC or other NEC - NEC NP-PX800X-08ZL | User Manual - Page 17
for Mac) are provided on the included NEC Projector CD-ROM. Two more utility software supports the Windows Media Player 11's "media sharing" function. • Crestron RoomView® compatibility The projector supports LAN-compatible viewer function About this user's manual The fastest way to get started is - NEC NP-PX800X-08ZL | User Manual - Page 18
other end into an active wall outlet. (→ page 13) Main Power Switch USB (LAN) Port (for optional Wireless LAN Unit) (→ page 164) * This security slot supports the MicroSaver ® Security System. Lens Cap (The lens cap is attached to the lens.) 4 - NEC NP-PX800X-08ZL | User Manual - Page 19
1. Introduction Rear CAUTION: Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation. Use caution when picking up the projector. Stacking Holder (3 locations) Remote Sensor - NEC NP-PX800X-08ZL | User Manual - Page 20
1. Introduction Control Panel/Indicator Section 1 7 8 9 10 11 2 3 4 5 6 12 1. 13 14 15 16 17 18 (POWER) Button (→ page 17, 29) 2. POWER Indicator (→ page 17, 29, 221) 3. STATUS Indicator (→ page 221) 4. LAMP 1 and LAMP 2 Indicators (→ page 174, 222) 5. TEMP. Indicator (→ page - NEC NP-PX800X-08ZL | User Manual - Page 21
your own program, typical PC control codes are on page 226. Use this connector for wired remote control of the projector using the NEC optional remote control. Connect the projector and optional remote control using a commercially available wired remote control cable. (for optional Wireless LAN Unit - NEC NP-PX800X-08ZL | User Manual - Page 22
1. Introduction Part Names of the Remote Control 1 3 5 4 8 9 12 13 17 16 18 21 22 24 25 27 28 30 33 34 19 20 23 26 29 32 31 36 35 12. VIEWER Button (→ page 20, 66) 13. NETWORK Button (→ page 20) 14. SOURCE Button (→ page 20) 15. PIP Button (→ page 20, 40) 16. ID SET Button (→ page 120) 17. - NEC NP-PX800X-08ZL | User Manual - Page 23
1. Introduction Battery Installation the battery cover. 1 Press the catch and remove 2 Install new ones (AA). Ensure 3 Slip the cover back over the batteries until it that you have the batteries' polarity (+/−) aligned correctly. snaps into place. NOTE: Do not mix different types of batteries or - NEC NP-PX800X-08ZL | User Manual - Page 24
use a wireless LAN. NOTE: • Image Express Utility for Mac does not support "Meeting Mode" which is provided in Image Express Utility 2.0. The following software page 202) Viewer PPT Converter 3.0 Download service For downloading or updating these software programs, visit our website: URL: http - NEC NP-PX800X-08ZL | User Manual - Page 25
or later (Windows XP Tablet PC Edition Service Pack 2 or later) • Only 32-bit version * "Easy Connection" supports the Administrative privileges of Windows XP and Windows 7/ Windows Vista only • Windows power-saving function is not supported. • Windows 7/Windows Vista Pentium 4/Pentium M 800 MHz - NEC NP-PX800X-08ZL | User Manual - Page 26
2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 13) Step 2 • Turning on the projector (→ page 16) Step 3 • - NEC NP-PX800X-08ZL | User Manual - Page 27
2. Projecting an Image (Basic Operation) Connecting Your Computer/Connecting the Power Cord NOTE: • Install a lens before performing the following steps. (→ page 154) 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about - NEC NP-PX800X-08ZL | User Manual - Page 28
2. Projecting an Image (Basic Operation) Using the Supplied Power Cord Stopper To prevent the power cord from accidently removing from the AC IN of the projector, attach the supplied power cord stopper to clamp the power cord. NOTE: • Do not clamp the power cord with other cables. Doing so can - NEC NP-PX800X-08ZL | User Manual - Page 29
2. Projecting an Image (Basic Operation) Removing the power cord from the power cord stopper 1. Push the clamper of the power cord stopper to unclasp it. 2. Push the power cord clamper to open it wide enough to pull out the power cord. Clamper 15 - NEC NP-PX800X-08ZL | User Manual - Page 30
2. Projecting an Image (Basic Operation) Turning on the Projector NOTE: • The projector has two power switches: A main power switch and a POWER button (POWER ON and OFF on the remote control) • Turning on the projector: 1. Press the main power switch to the ON position (I). The projector - NEC NP-PX800X-08ZL | User Manual - Page 31
2. Projecting an Image (Basic Operation) 2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator will turn to blue and the projector will become ready to use. TIP: • When the message "PROJECTOR IS LOCKED! ENTER YOUR PASSWORD." is - NEC NP-PX800X-08ZL | User Manual - Page 32
2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 27 menu languages. To select a menu language, follow these steps: 1. Use the , - NEC NP-PX800X-08ZL | User Manual - Page 33
2. Projecting an Image (Basic Operation) If the projected image is inverted or upside down 1 Press the ORIENTATION button. The [ORIENTATION] screen will be displayed. 2 Press again to select a correct orientation. Each time the ORIENTATION button is pressed, the choice you highlight will be - NEC NP-PX800X-08ZL | User Manual - Page 34
2. Projecting an Image (Basic Operation) Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the SOURCE button once. The projector will search for the available input - NEC NP-PX800X-08ZL | User Manual - Page 35
2. Projecting an Image (Basic Operation) Adjusting the Picture Size and Position Use the lens shift dial, the adjustable tilt foot lever, the zoom buttons and the focus buttons to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the - NEC NP-PX800X-08ZL | User Manual - Page 36
hands being pinched by the moving lens. NOTE: • The lens shift function is not available on the projector with NP16FL (PX750U) and NP06FL (PX700W/PX800X) lens installed. Return the lens shift position to the home position before installing the lens to the projector. • Shifting the lens to the - NEC NP-PX800X-08ZL | User Manual - Page 37
2. Projecting an Image (Basic Operation) Adjusting with the remote control 1. Press the LENS SHIFT button. The Lens Shift screen will be displayed. 2. Press the ▼▲◀ or ▶ button. Use the buttons to move the projected image. TIP: • The diagram below shows the lens shift adjustment range for - NEC NP-PX800X-08ZL | User Manual - Page 38
2. Projecting an Image (Basic Operation) Focus Applicable lens: • PX750U: NP16FL/NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL • PX700W/PX800X: NP06FL/NP07ZL/NP08ZL/NP09ZL/NP10ZL Use the FOCUS (+) or (−) button on the projector cabinet to obtain the best focus. TIP: To obtain the best - NEC NP-PX800X-08ZL | User Manual - Page 39
ZOOM (+) or (−) button on the projector cabinet to zoom in or out. • The zoom is not available on the separately sold NP16FL (PX750U) and NP06FL (PX700W/PX800X) lens. Adjusting the Tilt Feet • Turn the left and right tilt feet on the right, left, and rear to adjust. The tilt feet lengthen - NEC NP-PX800X-08ZL | User Manual - Page 40
2. Projecting an Image (Basic Operation) Correcting Keystone Distortion When the projector is not exactly perpendicular to the screen, keystone distortion occurs. To overcome it, you can use the "Keystone" function, a digital technology that can adjust for keystone-type distortion, resulting in a - NEC NP-PX800X-08ZL | User Manual - Page 41
2. Projecting an Image (Basic Operation) 5. Repeat steps 2 and 4 to correct keystone distortion. 6. After completing Keystone correction, press the EXIT button. The Keystone screen will disappear. • To perform Keystone correction again, press the 3D REFORM button to display the Keystone screen - NEC NP-PX800X-08ZL | User Manual - Page 42
display or may not be displayed correctly. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 104, 105) 28 - NEC NP-PX800X-08ZL | User Manual - Page 43
2. Projecting an Image (Basic Operation) Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote control. The [POWER OFF / ARE YOU SURE ? / CARBON SAVINGS- SESSION 0.000[g-CO2]] message will appear. - NEC NP-PX800X-08ZL | User Manual - Page 44
2. Projecting an Image (Basic Operation) After Use Preparation: Make sure that the projector is turned off. 1. Unplug the power cord. 2. Disconnect any other cables. • Remove the USB memory if it is inserted into the projector. 3. Mount the lens cap on the lens. 4. Before moving the - NEC NP-PX800X-08ZL | User Manual - Page 45
3. Convenient Features 1 Blocking the lamp light (LENS SHUTTER) Press the SHUTTER/HOME POSITION button to block the lamps light from hitting the screen. Press again to allow the screen to become illuminated again. • Another way to shut the lamp light off is to press the SHUTTER button on the remote - NEC NP-PX800X-08ZL | User Manual - Page 46
3. Convenient Features Enlarging a Picture You can enlarge the picture up to four times. NOTE: The maximum magnification may be less than four times depending on the signal. To do so: 1. Press the D-ZOOM (+) button to magnify the picture. 2. Press the button. The area of the magnified image - NEC NP-PX800X-08ZL | User Manual - Page 47
3. Convenient Features Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE] This feature enables you to select two brightness modes of the lamp: OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE]. [ECO MODE] [OFF] [ON] Description This is the default - NEC NP-PX800X-08ZL | User Manual - Page 48
3. Convenient Features Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector's [ECO MODE] is set to [OFF], or [ON]. This feature is called as [CARBON METER]. There are two messages: [TOTAL CARBON SAVINGS] - NEC NP-PX800X-08ZL | User Manual - Page 49
3. Convenient Features Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer's mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connecting the remote - NEC NP-PX800X-08ZL | User Manual - Page 50
3. Convenient Features Operating your computer's mouse from the remote control You can operate your computer's mouse from the remote control. PAGE / Button � scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer Buttons moves the mouse - NEC NP-PX800X-08ZL | User Manual - Page 51
3. Convenient Features Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE] Use the 3D Reform feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular. - NEC NP-PX800X-08ZL | User Manual - Page 52
3. Convenient Features 7. Use the button to move the projected image frame as shown on the example. 8. Press the ENTER button. 9. Use the button to select another icon which points in the direction. On the Cornerstone adjustment screen, select [EXIT] or press the EXIT button on the remote - NEC NP-PX800X-08ZL | User Manual - Page 53
° approx. VERTICAL Max. +/− 30° approx. CORNERSTONE KEYSTONE * The following are conditions under which the maximum angle is achieved: • When the NP18ZL (PX750U) and NP08ZL (PX700W/PX800X) lens is used • When the lens shift is set to the center When the lens shift is used and yet the image is - NEC NP-PX800X-08ZL | User Manual - Page 54
and the sub picture on the right side. • The main picture signal supports the COMPUTER 1, COMPUTER 2, and COMPUTER 3 connectors. The sub picture signal supports the VIDEO IN and S-VIDEO IN connectors. • The main picture supports an RGB signal with a resolution of 1280 × 1024 pixels or less. 40 - NEC NP-PX800X-08ZL | User Manual - Page 55
button again to return to the normal screen (single picture). TIP: • Selecting another source will return to the normal screen. • Selecting a source not supported for the main picture or the sub picture will return to the normal screen. [POSITION] This option allows you to select the position of - NEC NP-PX800X-08ZL | User Manual - Page 56
3. Convenient Features Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword - NEC NP-PX800X-08ZL | User Manual - Page 57
3. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the - NEC NP-PX800X-08ZL | User Manual - Page 58
3. Convenient Features To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION(2)] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD - NEC NP-PX800X-08ZL | User Manual - Page 59
values can be applied at the time of source selection. page → page 118 LENS MEMORY → page 109 NOTE: • PX700W/PX800X: The NP06FL, NP07ZL, NP08ZL, NP09ZL and NP10ZL lenses do not support Zoom position and Focus position. Do not use the LENS MEMORY function to store the lens shift position data - NEC NP-PX800X-08ZL | User Manual - Page 60
3. Convenient Features 2. Press the ▶ button to select [SETUP] and press the ENTER button. 3. Press the ▶ button to select [INSTALLATION (1)]. 4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER button. The [REF. LENS MEMORY] screen will be displayed. 5. Select [STORE] and - NEC NP-PX800X-08ZL | User Manual - Page 61
3. Convenient Features The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ENTER button. 3. Press the ▶ button to select [INSTALLATION (1)]. 4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER button. The [REF. LENS MEMORY] screen will be - NEC NP-PX800X-08ZL | User Manual - Page 62
3. Convenient Features TIP: To call up the adjusted values from [LENS MEMORY]: 1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER button. The confirmation screen will be displayed. 2. Press the ◀ button to select and [YES] and press the ENTER button. The adjusted - NEC NP-PX800X-08ZL | User Manual - Page 63
to the projector and enter the following URL : http:// /index.html • Use Image Express Utility 2.0 contained on the supplied NEC Projector CD-ROM. TIP: The factory setting IP address is [DHCP ON]. NOTE: • To use the projector in a network, consult with your network - NEC NP-PX800X-08ZL | User Manual - Page 64
of the computer being used. Example 1: When the host name of the projector has been set to "pj.nec.co.jp", access is gained to the network setting by specifying http://pj.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: When the IP address - NEC NP-PX800X-08ZL | User Manual - Page 65
3. Convenient Features PICTURE: Controls the video adjustment of the projector. BRIGHTNESS Increases the brightness adjustment value. BRIGHTNESS Decreases the brightness adjustment value. CONTRAST Increases the contrast adjustment value. CONTRAST Decreases the contrast adjustment value. COLOR - NEC NP-PX800X-08ZL | User Manual - Page 66
3. Convenient Features NETWORK SETTINGS • SETTINGS WIRED or WIRELESS SETTING APPLY DHCP ON DHCP OFF IP ADDRESS SUBNET MASK GATEWAY WINS AUTO DNS ON AUTO DNS OFF Setting for WIRED LAN PROFILE 1/PROFILE 2 DISABLE Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2. Turn - NEC NP-PX800X-08ZL | User Manual - Page 67
3. Convenient Features SSID SITE SURVEY NETWORK TYPE Enter an identifier (SSID) for wireless LAN. Communication can be done only with equipment whose SSID matches SSID for your wireless LAN. Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access. Select - NEC NP-PX800X-08ZL | User Manual - Page 68
3. Convenient Features • NAME PROJECTOR NAME Enter a name for your projector so that your computer can identify the projector. A projector name must be 16 characters or less. TIP: Projector name will not be affected even when [RESET] is done from the menu. Enter the hostname of the network connected - NEC NP-PX800X-08ZL | User Manual - Page 69
3. Convenient Features • NETWORK SERVICE PJLink PASSWORD HTTP PASSWORD AMX BEACON Set a password for PJLink*. Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The projector supports all the commands of PJLink Class 1. Setting of PJLink will not be affected even - NEC NP-PX800X-08ZL | User Manual - Page 70
Enterprise The specifications recommended by Microsoft as the operation environment for Windows 7/Windows Vista should be satisfied. Wired LAN or wireless LAN environment that supports TCP/IP is required. High Color (16 bits) True Color (24 bits and 32 bits) * Setting with 256 colors or less is not - NEC NP-PX800X-08ZL | User Manual - Page 71
3. Convenient Features 2. Press the or button to select [NETWORK] and press the ENTER button. In the screen, the [APPLICATION MENU] menu is displayed. 3. From the [APPLICATION MENU] menu, select [NETWORK PROJECTOR]. The [PROJECTOR NAME/DISPLAY RESOLUTION/PASSWORD/URL] will be displayed. - NEC NP-PX800X-08ZL | User Manual - Page 72
3. Convenient Features Projecting the Image with Network Projector 1. Click [Start] from the desktop of Windows 7. 2. Click [All Programs]. 3. Click [Accessories]. 4. Click [Connect to a Network Projector]. When the [Permission Connect to a Network Projector] window appears, click [Yes.]. - NEC NP-PX800X-08ZL | User Manual - Page 73
3. Convenient Features 7. Input the password to the password input box displayed by the operation at step 3 on page 57. 8. Click [Connect]. The network projector function works and the screen of Windows 7 is projected from the projector. • If the resolution of your computer's screen is - NEC NP-PX800X-08ZL | User Manual - Page 74
Vista Enterprise Windows XP Professional with Service Pack 3 (Note) • In this user's manual this feature is described using Windows be used with the projector. • A wireless keyboard or mouse that supports Bluetooth cannot be used with the projector. • We do not warrant that the USB - NEC NP-PX800X-08ZL | User Manual - Page 75
3. Convenient Features Prepare a commercially available wireless keyboard (US layout version). Connect the USB wireless receiver to the USB port (Type A) of the projector. Make all necessary settings for your wireless keyboard and mouse. 61 - NEC NP-PX800X-08ZL | User Manual - Page 76
3. Convenient Features Setting the password to the user account of Windows 7 TIP: If a password has been set for an account, the steps 1 to 9 can be skipped. 1. Click [Start] from the desktop of Windows 7. 2. Click [Control Panel]. 3. Click [Add or remove user accounts] displayed under [User - NEC NP-PX800X-08ZL | User Manual - Page 77
3. Convenient Features 4. Click [View status] displayed in blue on the right of [Local Area Connection] in the window. The [Local Area Connection Status] window appears. 5. Click [Details...]. Write down the value for "IPv4 IP Address" (xxx.xxx.xxx.xxx) displayed. 6. Click [Close]. 7. - NEC NP-PX800X-08ZL | User Manual - Page 78
3. Convenient Features 2. Press the or button to select [NETWORK] and press the ENTER button. The [APPLICATION MENU] menu will be displayed. 3. From the [APPLICATION MENU] menu, use the wireless keyboard to select [REMOTE DESKTOP CONNECTION]. The [REMOTE DESKTOP CONNECTION] window appears - NEC NP-PX800X-08ZL | User Manual - Page 79
3. Convenient Features Exiting the Remote Desktop 1. Operate the wireless keyboard to click [Start] from the desktop screen projected by the projector. 2. Click [X] on the right of the start menu. The remote desktop function is stopped. 3. Press the SOURCE button of the projector to select an - NEC NP-PX800X-08ZL | User Manual - Page 80
Baseline JPEG: 10000 × 10000 • Progressive JPEG: 1280 × 1280 • GIF: 1280 × 1280 • Others: 4000 × 4000 • Some files supported by the above requirements may not be displayed. Supported movie files File name extension .mpg, .mpeg. .wmv .mp4 Video compression/expansion method MPEG2 VC-1/WMV9 H.264 - NEC NP-PX800X-08ZL | User Manual - Page 81
, refer to the document or help file that comes with your Windows. - We do not warrant that the USB port of the projector will support all USB memories in the market. - Wait at least 5 seconds after disconnecting a USB memory device before reconnecting it and vice versa. The projector may - NEC NP-PX800X-08ZL | User Manual - Page 82
4. Using the Viewer Notices on shared folder and media server • Files from a shared folder or media server may not be projected if security or antivirus software is installed on your computer. • Open the following firewall ports: - Media server Port number 1900 2869 10243 10280-10284 - Shared - NEC NP-PX800X-08ZL | User Manual - Page 83
4. Using the Viewer ❷ Preparing presentation materials 1. Create your presentation materials and save them in a supported file format to your computer. • See page 91 for supported file formats. • Make sure that PowerPoint file is displayed on the Viewer before giving your real presentation. - NEC NP-PX800X-08ZL | User Manual - Page 84
4. Using the Viewer ❸ Projecting images stored in a USB memory device This section explains the basic operation of the Viewer. The explanation provides the operational procedure when the Viewer toolbar is set to the factory default. Preparation: Before starting the Viewer, store images to the USB - NEC NP-PX800X-08ZL | User Manual - Page 85
4. Using the Viewer 4. Press the ▶ button to select "USB1" and press the ENTER button. The "USB1" thumbnail screen will be displayed. TIP: • For more information about thumbnail screen, see page 76. 5. Use the ▲▼◀ or ▶ button to select an icon. • The → (arrow) symbol on the right indicates - NEC NP-PX800X-08ZL | User Manual - Page 86
return to the thumbnail screen, press the EXIT button. NOTE: • Files with slideshow or animation effects may not be correctly displayed on the Viewer. See "Supported PowerPoint files" on page 67, 91. • Adobe PDF file The first page will be displayed. • The PDF file will fill the width of the - NEC NP-PX800X-08ZL | User Manual - Page 87
/AUTO) for slides of index file works in the following way: In case of [MANUAL] for [PLAY MODE] When you select [OPTIONS] → [SLIDE SETTING] → [PLAY MODE] → [MANUAL], index files will be set for manual playback in regardless of whether [INTERVAL] is set. In case of [AUTO] selected for [PLAY - NEC NP-PX800X-08ZL | User Manual - Page 88
Menu Scroll bar Cursor (yellow) Folder icon [Drive list screen] Path information [Thumbnail screen] Drive information/File information Menu guide Operation button guide Control bar * The operation for still image differs from that for movie. [Slide screen] • Drive list screen Displays a list - NEC NP-PX800X-08ZL | User Manual - Page 89
USB memory or shared foler stores index files. Displays the location of a folder or file. [Example] USB1 Displays the drive. Menu guide Operation button guide 314MB FREE/492MB Displays free space and capcity of a drive. (USB only) USB SHARED FOLDER MEDIA SERVER PRESENTATION Path information Drive - NEC NP-PX800X-08ZL | User Manual - Page 90
the whole screen down or up. Displays the location of a folder or file. [Example] 005.jpg Selected folder name or file name Menu guide Operation button guide 5/200 Numbers and order of files in a folder (only when folder selected) 11/03/2010 13:25:12 Create/Change date: M/D/Y/H/M/B 502KB Displays - NEC NP-PX800X-08ZL | User Manual - Page 91
4. Using the Viewer • Slide screen (still image/movie) Plays a file selected from a list of thumbnails or icons. • For operating a Microsoft PowerPoint file and Adobe PDF file, see page 72. Control bar operation • The control bar will be displayed only when a still image (or index file) and a - NEC NP-PX800X-08ZL | User Manual - Page 92
4. Using the Viewer Functions of movie control bar Name PREV Description Goes back to the beginning of a movie file. • Goes back to the beginning of the previous movie file if executed immediately after being started playing. Fast-rewinds a movie file for about 7 seconds. PLAY PAUSE FF NEXT TIME - NEC NP-PX800X-08ZL | User Manual - Page 93
SIZE Description Displays the image with its aspect ratio in the projector's displayable maximum resolution. Displays the image in its actual size. Selects manual play. Selects auto play. Specifies interval time when [AUTO] is selected for PLAY MODE. Turns on or off the repeat function. PLAY MODE - NEC NP-PX800X-08ZL | User Manual - Page 94
device is inserted into the USB port of the projector and when [VIEWER] is selected for [SOURCE]. • Auto play starts for the first found file supporting the file type set up for Auto Play. The file will be searched in the drive root or lower level. • When [VIEWER] is selected for - NEC NP-PX800X-08ZL | User Manual - Page 95
4. Using the Viewer • SORT SETTING Sets the order of displaying thumbnails or slides. Name SORT Options NAME (ABC..) NAME (ZYX..) EXT. (ABC..) EXT. (ZYX..) DATE (NEW) DATE (OLD) SIZE (BIG) SIZE (SMALL) Description Displays the files alphabetically by name in ascending order. Displays the files - NEC NP-PX800X-08ZL | User Manual - Page 96
down the path for later use. • For sharing a folder, refer to your user guide or help file accompanied with your Windows computer. • Use a keyboard to give a from the menu. • Digital signature (SMB signature) is not supported. Connecting the projector to the shared folder 1. Press the VIEWER - NEC NP-PX800X-08ZL | User Manual - Page 97
4. Using the Viewer 2. Displays the [OPTIONS] menu. Press the ▼ button to select the (OPTIONS) icon and press the ENTER button. • When the OPTIONS menu is displayed, the drive list will not be displayed. 3. Display the [SHARED FOLDER SETTING] screen. Press the ▼ button to select the (SHARED - NEC NP-PX800X-08ZL | User Manual - Page 98
4. Using the Viewer 6. Exit the setting. Press the ▼ button to select [OK] and press the ENTER button. This will close the [SHARED FOLDER] screen. • If an error message appear, your settings are not correct. Try again. 84 - NEC NP-PX800X-08ZL | User Manual - Page 99
4. Using the Viewer Disconnecting the shared folder from the projector • Disable the number of a shared folder you wish to disconnect Press the ▼ button to select [ENABLE] and press the ENTER button to clear it. NOTE: • When a PowerPoint file or PDF file is displayed, do not disconnect your LAN - NEC NP-PX800X-08ZL | User Manual - Page 100
4. Using the Viewer ❺ Projecting data from media server Media server LAN Media server Wireless LAN Projector Media server Preparation For projector: Connect the projector to the network. For computer: Prepare image files or movie files to be projected, and set up "Media Sharing" in Windows - NEC NP-PX800X-08ZL | User Manual - Page 101
4. Using the Viewer 3. Select "Share my media" check box, and then select OK. A list of accessible devices will be displayed. 4. Select "PX750U Series" and then "Allow". A check mark will be added to the "PX750U Series" icon. • The "PX750U Series" is a projector name specified in [NETWORK - NEC NP-PX800X-08ZL | User Manual - Page 102
4. Using the Viewer Setting up "Media Sharing" in Windows Media Player 12 1. Start Windows Media Player 12. 2. Select "Stream", and then select "Automatically allow devices to play my media". The "Allow All Media Devices" windows will be displayed. 3. Select "Automatically allow all computers - NEC NP-PX800X-08ZL | User Manual - Page 103
4. Using the Viewer Connecting the projector to the media server Press the VIEWER button on the remote control. The VIEWER will start. • Another way to start the VIEWER is to press the SOURCE button a few times on the projector cabinet. (→ page 20) • This will start searching for a computer with - NEC NP-PX800X-08ZL | User Manual - Page 104
4. Using the Viewer Disconnecting the projector from the media server 1. Display the OPTIONS menu. Press the ▼ button to select the [OPTIONS] icon and select the ENTER button. 2. Display the MEDIA SERVER setting screen. Press the ▼ button to select the MEDIA SERVER icon and press the ENTER - NEC NP-PX800X-08ZL | User Manual - Page 105
or fonts may not be displayed. Example: There are some restrictions on animation, selection, or hyperlink. • Some functions included in font are not supported. • It may take longer time to feed pages compared with a computer • In some cases Microsoft PowerPoint 97-2007 format files may not be - NEC NP-PX800X-08ZL | User Manual - Page 106
5. Using On-Screen Menu Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT in the bottom - NEC NP-PX800X-08ZL | User Manual - Page 107
5. Using On-Screen Menu 2 Menu Elements Tab Slide bar Solid triangle Available buttons Source Menu mode Highlight Radio button Wireless symbol ECO mode symbol High Altitude symbol Key Lock symbol Off Timer remaining time Menu windows or dialog boxes typically have the following elements: - NEC NP-PX800X-08ZL | User Manual - Page 108
5. Using On-Screen Menu 3 List of Menu Items Some menu items are not available depending on the input source. Menu Item COMPUTER1 COMPUTER2 COMPUTER3 HDMI DisplayPort VIDEO S-VIDEO VIEWER NETWORK SLOT ENTRY LIST TEST PATTERN MODE PRESET GENERAL REFERENCE GAMMA CORRECTION COLOR TEMPERATURE*1 DYNAMIC - NEC NP-PX800X-08ZL | User Manual - Page 109
INDONESIA COLOR, MONOCHROME OFF, ON OFF, ON OFF, ON OFF, ON MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC BLUE, BLACK, LAN, WIRELESS LAN, WPS, NETWORK INFORMATION, PROJECTOR NAME, DOMAIN, ALERT MAIL, NETWORK SERVICE OFF, ON OFF, ON 4800bps, 9600bps, 19200bps, 38400bps, 115200bps FRONT/BACK, FRONT - NEC NP-PX800X-08ZL | User Manual - Page 110
5. Using On-Screen Menu AUTO ADJUST FAN MODE SIGNAL SELECT(COMP3) SEAMLESS SWITCHING (for PX750U only) OPTIONS(1) SETUP COLOR SYSTEM VIDEO S-VIDEO COMPUTER3 (VIDEO) PROJECTOR ON PROJECTOR STANDBY NORMAL AUTO FLOOR RGB/ COMPONENT OFF AUTO AUTO AUTO ON ENABLE NORMAL OFF OFF OFF LAST OFF, NORMAL, FINE - NEC NP-PX800X-08ZL | User Manual - Page 111
, Australia, Asia and other countries than North America). SLOT (for optional board) Selects a signal from the optional board (SB-01HC or other NEC's interface boards) when it is installed. ENTRY LIST Displays a list of signals. See the following pages. TEST PATTERN Closes the menu and switches - NEC NP-PX800X-08ZL | User Manual - Page 112
5. Using On-Screen Menu Using the Entry List When any source or lens memory adjustments are made, the adjustments are automatically registered in the Entry List. The (adjustment values of) registered signals can be loaded from the Entry List whenever necessary. However, only up to 100 patterns can - NEC NP-PX800X-08ZL | User Manual - Page 113
5. Using On-Screen Menu Entering the currently projected signal into the Entry List [STORE] 1. Press the or button to select any number. 2. Press the or button to select [STORE] and press the ENTER button. Calling up a signal from the Entry List [LOAD] Press the or button to select - NEC NP-PX800X-08ZL | User Manual - Page 114
5. Using On-Screen Menu Cutting a signal from the Entry List [CUT] 1. Press the or button to select a signal you wish to delete. 2. Press the or button to select [CUT] and press the ENTER button. The signal will be deleted from the Entry List and the deleted signal will be displayed on - NEC NP-PX800X-08ZL | User Manual - Page 115
5. Using On-Screen Menu 5 Menu Descriptions & Functions [ADJUST] [PICTURE] [MODE] This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input. STANDARD Saves settings for each item of [PRESET] (Preset 1 through 6 Saves all the settings of [PICTURE] - NEC NP-PX800X-08ZL | User Manual - Page 116
5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 6]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT Recommended for - NEC NP-PX800X-08ZL | User Manual - Page 117
5. Using On-Screen Menu Adjusting White Balance [WHITE BALANCE] This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen. [COLOR CORRECTION] Corrects the color - NEC NP-PX800X-08ZL | User Manual - Page 118
5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function - NEC NP-PX800X-08ZL | User Manual - Page 119
5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and - NEC NP-PX800X-08ZL | User Manual - Page 120
5. Using On-Screen Menu Selecting the Aspect Ratio [ASPECT RATIO] Use this function to select the screen's vertical:horizontal aspect ratio. Select the screen type (4:3 screen, 16:9 screen or 16:10 screen) at the screen setting before setting the aspect ratio. (→ page 116) The projector - NEC NP-PX800X-08ZL | User Manual - Page 121
5. Using On-Screen Menu NATIVE The projector displays the current image in its true resolution when the incoming computer signal has a lower or higher resolution than the projector's native resolution. (→ page 2, 216) When the incoming computer signal has a higher resolution than the projector's - NEC NP-PX800X-08ZL | User Manual - Page 122
5. Using On-Screen Menu [VIDEO] Using Noise Reduction [NOISE REDUCTION] This function is used to reduce video noise. RANDOM NR Reduces flickering random noise in an image. MOSQUITO NR Reduces mosquito noise that appears around the edges of an image during DVD playback. BLOCK NR Reduces block - NEC NP-PX800X-08ZL | User Manual - Page 123
5. Using On-Screen Menu [VIDEO LEVEL] This function selects video signal level when the projector's HDMI and DisplayPort input connectors and an external device are connected. AUTO The video level is switched automatically based on the information from the device outputting the signal. Depending on - NEC NP-PX800X-08ZL | User Manual - Page 124
5. Using On-Screen Menu 6 Menu Descriptions & Functions [SETUP] [BASIC] Correcting Vertical Keystone Distortion Manually [KEYSTONE] You can correct vertical distortion manually. (→ page 26) TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment. - NEC NP-PX800X-08ZL | User Manual - Page 125
5. Using On-Screen Menu SOURCE: This option allows you to select a sub picture signal. The options are: OFF, VIDEO and S-VIDEO. Selecting [OFF] will cancel the PIP/PICTURE BY PICTURE mode and return to the normal screen. Using the Wall Color Correction [WALL COLOR] This function allows for quick - NEC NP-PX800X-08ZL | User Manual - Page 126
5. Using On-Screen Menu Selecting the lamp to be used [LAMP SELECT] This feature allows you to select which lamp to be used. NOTE: This option is not displayed in the Basic menu. DUAL Select to use the two lamps at the same time to increase brightness. SINGLE Lights either lamp 1 or 2 whichever - NEC NP-PX800X-08ZL | User Manual - Page 127
bottom of the screen. [TOOLS] See "APPLICATION MENU" on page 131. Selecting Menu Language [LANGUAGE] You can choose one of 27 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. 113 - NEC NP-PX800X-08ZL | User Manual - Page 128
5. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as COMPUTER 1, COMPUTER2, COMPUTER3, HDMI, DisplayPort, - NEC NP-PX800X-08ZL | User Manual - Page 129
option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the factory preset. Selecting a Color or Logo for Background [BACKGROUND] Use - NEC NP-PX800X-08ZL | User Manual - Page 130
5. Using On-Screen Menu DESKTOP FRONT CEILING REAR DESKTOP REAR CEILING FRONT Selecting Aspect Ratio and Position for Screen [SCREEN] Screen type [SCREEN TYPE] Sets the aspect ratio of the projection screen. 4:3 screen 16:9 screen 16:10 screen For a screen with a 4:3 aspect ratio For a screen - NEC NP-PX800X-08ZL | User Manual - Page 131
5. Using On-Screen Menu Using Multi-Screen Compensation [MULTI-SCREEN COMP.] This feature allows you to match brightness of images projected from multiple projectors. Before using [MULTI-SCREEN COMP.], you need to match color of images projected from multiple projectors. MODE OFF: Turns off this - NEC NP-PX800X-08ZL | User Manual - Page 132
5. Using On-Screen Menu Using the Reference Lens Memory Function [REF. LENS MEMORY] This function serves to store the adjusted values common to all input sources when using the LENS SHIFT, ZOOM and FOCUS buttons of the projector or the remote control. The adjusted values stored in memory can be used - NEC NP-PX800X-08ZL | User Manual - Page 133
] is done from the menu. Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 115200 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on - NEC NP-PX800X-08ZL | User Manual - Page 134
5. Using On-Screen Menu NOTE: • When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.) • Your setting will not be affected even when [RESET] - NEC NP-PX800X-08ZL | User Manual - Page 135
Menu [OPTIONS(1)] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF The computer signal will not be - NEC NP-PX800X-08ZL | User Manual - Page 136
5. Using On-Screen Menu NOTE: • When [HIGH ALTITUDE] is selected for [FAN MODE], a symbol icon will be displayed at the bottom of the menu. • It is recommended that you select High speed mode if you use the projector non-stop for consecutive days. • Set [FAN MODE] to [HIGH ALTITUDE] when using - NEC NP-PX800X-08ZL | User Manual - Page 137
5. Using On-Screen Menu [OPTIONS(2)] Selecting Power-saving in [STANDBY MODE] The projector has three standby modes: [NORMAL], [POWER-SAVING] and [NETWORK STANDBY]. The POWER-SAVING mode is the mode that allows you to put the projector in the power-saving condition which consumes less power than - NEC NP-PX800X-08ZL | User Manual - Page 138
(RJ-45) or the wireless LAN unit (sold separately) mounted on the projector is projected. SLOT Displays a signal from the optional (SB-01HC or other NEC's optional boards) when it is installed. 124 - NEC NP-PX800X-08ZL | User Manual - Page 139
5. Using On-Screen Menu 7 Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has nine pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP 1 - NEC NP-PX800X-08ZL | User Manual - Page 140
5. Using On-Screen Menu [SOURCE(1)] INPUT TERMINAL HORIZONTAL FREQUENCY SYNC TYPE SCAN TYPE ENTRY NO. RESOLUTION VERTICAL FREQUENCY SYNC POLARITY SOURCE NAME [SOURCE(2)] SIGNAL TYPE BIT DEPTH LINK RATE VIDEO TYPE VIDEO LEVEL LINK LANE [WIRED LAN] IP ADDRESS GATEWAY SUBNET MASK - NEC NP-PX800X-08ZL | User Manual - Page 141
5. Using On-Screen Menu [WIRELESS LAN(1)] IP ADDRESS GATEWAY SUBNET MASK MAC ADDRESS [WIRELESS LAN(2)] SSID WEP/WPA SIGNAL LEVEL NETWORK TYPE CHANNEL [VERSION(1)] FIRMWARE FIRMWARE2 DATA 127 - NEC NP-PX800X-08ZL | User Manual - Page 142
5. Using On-Screen Menu [VERSION(2)] FIRMWARE3 [OTHERS] PROJECTOR NAME SERIAL NUMBER CONTROL ID (when [CONTROL ID] is set) MODEL NO. LAN UNIT TYPE 128 - NEC NP-PX800X-08ZL | User Manual - Page 143
5. Using On-Screen Menu 8 Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to - NEC NP-PX800X-08ZL | User Manual - Page 144
5. Using On-Screen Menu Clearing the Filter Usage Hours [CLEAR FILTER HOURS] Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press the ENTER button. The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] - NEC NP-PX800X-08ZL | User Manual - Page 145
allows you to set up the User Supportware, Network Settings (NETWORK SETTINGS) and Tools (TOOLS). The User Supportware is contained on the supplied NEC Projector CD-ROM. In [ADMINISTRATOR MODE], either [ADVANCED] menu or [BASIC] menu can be selected. (→ page 149) The [BASIC] menu contains minimum - NEC NP-PX800X-08ZL | User Manual - Page 146
5. Using On-Screen Menu REMOTE DESKTOP CONNECTION This allows you to set up for computer name entry and effects for Remote Desktop. NOTE: • A USB keyboard is required to set up the Remote Desktop Connection. 132 - NEC NP-PX800X-08ZL | User Manual - Page 147
the PC and projector via a wireless LAN. Image Express Utility 2.0 and Image Express Utility 2 for Mac are contained on the supplied NEC Projector CDROM. To use [EASY CONNECTION], select [WIRELESS LAN] → [PROFILES] → [EASY CONNECTION]. NOTE: The [EASY CONNECTION] function is available on Windows - NEC NP-PX800X-08ZL | User Manual - Page 148
5. Using On-Screen Menu WIRED LAN or WIRELESS LAN (ADVANCED menu only) * To use the wireless LAN functions, connect a separately sold wireless LAN unit to the projector. (→ page 164) PROFILES • Up to two settings for the LAN port or USB wireless LAN unit - can be stored in memory of the projector. - NEC NP-PX800X-08ZL | User Manual - Page 149
5. Using On-Screen Menu • When selecting [WPS], the network will be connected by using settings stored automatically with the WPS function. Selecting [WPS] will allow the projector to access the network by using the settings the WPS function automatically stored. DHCP Place a check mark to - NEC NP-PX800X-08ZL | User Manual - Page 150
5. Using On-Screen Menu SITE SURVEY Displays a list of available SSIDs for wireless LAN on site. Select - an SSID which you can access. To select an SSID, highlight [SSID] and use the to select [OK] and press the ENTER button Wireless access point Ad Hoc PC WEP or WPA enabled SECURITY This will - NEC NP-PX800X-08ZL | User Manual - Page 151
5. Using On-Screen Menu When [WEP(64bit)] or [WEP(128bit)] is selected for [SECURITY TYPE] KEY SELECT KEY1, KEY2, KEY3, KEY4 Selects one WEP key from the four keys below. Enter a WEP key. • Maximum number of characters Option WEP 64bit WEP 128bit Alphanumeric (ASCII) 5 13 Hexadecimal (HEX) 10 26 - NEC NP-PX800X-08ZL | User Manual - Page 152
device. After completing saving the file, remove the USB memory device from the computer. Important: • The file formats of digital certificate that are supported by the projector are DER and PKCS#12 only. • The projector cannot handle any digital certificate whose file size exceeds 8 KB. • CRL - NEC NP-PX800X-08ZL | User Manual - Page 153
5. Using On-Screen Menu 4. Select [SITE SURVEY] and press the ENTER button. The "SSID" list will be displayed. 5. Select a connecting SSID, and then select [OK]. Finally press the ENTER button. • Select the SSID for which WPA-PSK or WPA2-PSK is set. • Select [INFRASTRUCTURE ( not available - NEC NP-PX800X-08ZL | User Manual - Page 154
5. Using On-Screen Menu 11. Select the [AUTHENTICATION] tab. The [AUTHENTICATION] page will be displayed. Select either [EAP-TLS] or [PEAP-MSCHAPv2] for [EAP TYPE]. The setting items vary depending on the EAP type. See the table below. EAP Type EAP-TLS Setting Item User Name Client - NEC NP-PX800X-08ZL | User Manual - Page 155
. A list of files (thumbnail screen) will be displayed. • For operating the thumbnail screen, see "4. Using the Viewer" in the "User's Manual" (PDF). • To return to the [AUTHENTICATION] page, press the EXIT button. NOTE: Installing a digital certificate You can install each digital certificate - NEC NP-PX800X-08ZL | User Manual - Page 156
5. Using On-Screen Menu 17. On the thumbnail screen, select a digital certificate (DER format file) saved in your USB memory device and press the ENTER button. • Select your root CA certificate here. The selected digital certificate will be installed on the projector. 18. After completing - NEC NP-PX800X-08ZL | User Manual - Page 157
ENTER button. The drive list screen will be displayed. • For operating the thumbnail screen, see "4. Using the Viewer" in the "User's Manual" (PDF). • To return to the [AUTHENTICATION] page, press the EXIT button. NOTE: Installing a digital certificate You can install each digital certificate - NEC NP-PX800X-08ZL | User Manual - Page 158
5. Using On-Screen Menu 18. After completing required settings, select [OK] and press the ENTER button. The [WIRELESS] page will be returned. 19. Select [RECONNECT] and press the ENTER button. 20. Select [OK] and press the ENTER button. This will complete setting [PEAP-MSCHAPv2] for [EAP TYPE] - NEC NP-PX800X-08ZL | User Manual - Page 159
5. Using On-Screen Menu WPS When the wireless LAN access point connected to the projector supports WPS (Wi-Fi Protected Setup TM), you can use PIN method or push button method to set up the wireless LAN for the projector. PIN - NEC NP-PX800X-08ZL | User Manual - Page 160
5. Using On-Screen Menu PROJECTOR NAME (ADVANCED menu only) PROJECTOR NAME Set a unique projector name. Up to 16 alphanumeric characters and symbols DOMAIN (ADVANCED menu only) Set a host name and domain name of the projector. HOST NAME DOMAIN NAME Set a host name of the projector. Set a - NEC NP-PX800X-08ZL | User Manual - Page 161
from the projector: The lamp and filters are at the end of its usable life. Please replace the lamp and filters. Projector Name: NEC Projector Lamp 1 Hours Used: xxxx [H] Lamp 2 Hours Used: xxxx [H] HOST NAME DOMAIN NAME SENDER'S ADDRESS SMTP SERVER NAME RECIPIENT'S ADDRESS 1, 2, 3 TEST MAIL Type - NEC NP-PX800X-08ZL | User Manual - Page 162
5. Using On-Screen Menu NETWORK SERVICE (ADVANCED menu only) HTTP SERVER PJLink Set a password for by Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The projector supports all the commands of PJLink Class 1. • Setting of PJLink will not be affected even - NEC NP-PX800X-08ZL | User Manual - Page 163
5. Using On-Screen Menu TOOLS ADMINISTRATOR MODE This allows you to select MENU MODE, save settings, and set a password for the administrator mode. MENU MODE NOT SAVE SETTING VALUES NEW PASSWORD/ CONFIRM PASSWORD Select either [BASIC] or [ADVANCED] menu. (→ page 94) Placing a check mark will not - NEC NP-PX800X-08ZL | User Manual - Page 164
5. Using On-Screen Menu PROGRAM TIMER This option turns on/off the projector and changes video signals, and selects ECO mode automatically at a specified time. NOTE: • Before using [PROGRAM TIMER], make sure that the [DATE AND TIME] feature is set. (→ page 153) • Make sure that the projector is - NEC NP-PX800X-08ZL | User Manual - Page 165
projector is turned on by using the program timer and if you want to turn off the projector, set the off-time or do it manually so as not to leave the projector on for a long period of time. 151 - NEC NP-PX800X-08ZL | User Manual - Page 166
5. Using On-Screen Menu Activating the program timer 1. Select [ENABLE] on the [PROGRAM TIMER] screen and press the ENTER button. The [ENABLE] will be activated. 2. Select [OK] and press the ENTER button. The [PROGRAM TIMER] screen will be changed to the [TOOL] screen. NOTE: • Clearing [ - NEC NP-PX800X-08ZL | User Manual - Page 167
5. Using On-Screen Menu DATE AND TIME You can set the current time, month, date, and year. NOTE: The projector has a built-in clock. The clock will keep working for about 2 weeks after the main power is turned off. If the main power is off for 2 weeks or more, the built-in clock will cease. If the - NEC NP-PX800X-08ZL | User Manual - Page 168
: The following lenses designed exclusively for this projector cannot mounted onto another projector. - PX750U: NP16FL/NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL - PX700W/PX800X: NP06FL/NP07ZL/NP08ZL/NP09ZL/NP10ZL Mounting the lens 1. Remove the dust cap from the projector. 2. Remove the lens cap on - NEC NP-PX800X-08ZL | User Manual - Page 169
4. Turn the lens clockwise. Turn until a click is heard. The lens is now fastened onto the projector. TIP: Mounting the lens theft prevention screw Fasten the lens theft prevention screw included with the projector to the bottom of the projector so that the lens cannot be removed easily. - NEC NP-PX800X-08ZL | User Manual - Page 170
6. Installation and Connections Making Connections The projector can be connected to a computer using the computer cable, a 5 x BNC cable, HDMI cable or DisplayPort cable. Prepare commercially available cables for connection. Analog RGB signal connection • Connect the computer cable between the - NEC NP-PX800X-08ZL | User Manual - Page 171
Button on the remote control HDMI DisplayPort NOTE: • Turn off the power of the computer and projector before connecting. • This projector does not support NEC video unit (model ISS-6020) video decoded outputs. • When a video deck is connected via a scan converter, etc., the display may not be - NEC NP-PX800X-08ZL | User Manual - Page 172
6. Installation and Connections Cautions when connecting an HDMI cable • Use a certified High Speed HDMI® Cable or High Speed HDMI® Cable with Ethernet. Cautions when connecting a DisplayPort cable • Use a certified DisplayPort cable. • Depending on the computer, some time may be required - NEC NP-PX800X-08ZL | User Manual - Page 173
6. Installation and Connections Connecting an External Monitor Computer cable (VGA) (not supplied) Computer cable (VGA) (supplied) You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you're projecting. NOTE: • Daisy chain - NEC NP-PX800X-08ZL | User Manual - Page 174
S-VIDEO IN SOURCE button on the projector cabinet VIDEO S-VIDEO Button on the remote control VIDEO S-VIDEO NOTE: Refer to your VCR owner's manual for more information about your equipment's video output requirements. NOTE: • An image may not be displayed correctly when a Video or S-Video source is - NEC NP-PX800X-08ZL | User Manual - Page 175
6. Installation and Connections Connecting Component Input BNC (male) to RCA (female) adapter (not supplied) 15-pin - to - RCA (female) × 3 cable adapter (ADP-CV1E) Component video RCA × 3 cable (not supplied) DVD player Audio Equipment • Select the source name for its appropriate input - NEC NP-PX800X-08ZL | User Manual - Page 176
PC to the HDMI IN connector of your projector. NOTE: The HDMI IN connector supports Plug & Play (DDC2B). HDMI cable (not supplied) Use High Speed HDMI® dark areas. For more information on settings, refer to the instruction manual of the audio video equipment to be connected. • When connecting - NEC NP-PX800X-08ZL | User Manual - Page 177
6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [APPLICATION MENU] → [NETWORK SETTINGS] → [WIRED - NEC NP-PX800X-08ZL | User Manual - Page 178
6. Installation and Connections Connecting to a Wireless LAN (sold separately) The separately sold wireless LAN unit allows you to use a wireless LAN environment. When using the projector in a wireless LAN environment, the IP address and other settings must be made on the projector. Important: • - NEC NP-PX800X-08ZL | User Manual - Page 179
6. Installation and Connections 1. Press the button to set the projector to the standby mode, then turn off the main power switch. 2. Remove the plate (port cover). Loosen the screw security port cover. • The screw is not removable. Plate 3. Slowly insert the wireless LAN unit into the USB ( - NEC NP-PX800X-08ZL | User Manual - Page 180
6. Installation and Connections To remove the wireless LAN unit 1. Press the button to set the projector to the standby mode, then turn off the main power switch. 2. Remove the anti-theft cap. Loosen the screw and remove the anti-theft cap for the Wireless LAN Unit. 3. Pull out the Wireless - NEC NP-PX800X-08ZL | User Manual - Page 181
6. Installation and Connections Example of wireless LAN connection (Network Type → Infrastructure) (→ page 136) PC with wireless LAN card inserted PC with built-in wireless LAN function USB Wireless LAN Unit Wireless access point Wired LAN Example of wireless LAN connection (Network Type → Ad - NEC NP-PX800X-08ZL | User Manual - Page 182
to two outputs of the two projectors. • Notes for stacking - Ask your service person for setting up and adjusting projectors. - Set up the projectors in a place or structure in a way with sufficient strength to support the combined weight of the two projectors. The single projector with a lens - NEC NP-PX800X-08ZL | User Manual - Page 183
6. Installation and Connections Attaching Stacking Holders Attach three stacking holders to three locations on the top of the lower projector. Preparation: Tools required are Phillips screwdriver (plus-head) and three stacking holders packaged with the projector. Loosen the tilt feet (three - NEC NP-PX800X-08ZL | User Manual - Page 184
6. Installation and Connections 3. Put another projector on the first projector. Put each tilt foot of the upper projector on the stacking holders (three locations). • Each tilt foot has a rubber. Place each tilt foot rubber on stacking holders (three locations). Foot rubber TIP: • To remove - NEC NP-PX800X-08ZL | User Manual - Page 185
7. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters, the lens, the cabinet, and to replace the lamp and the filters. Cleaning the Filters The air-filter sponge keeps dust and dirt from getting inside the projector and should be frequently - NEC NP-PX800X-08ZL | User Manual - Page 186
7. Maintenance 3. Use a vacuum cleaner to vacuum all the dust inside. Get rid of dust in the accordion filter NOTE: • Whenever you vacuum the filter, use the soft brush attachment to vacuum. This is to avoid damage to the filter. • Do not wash the filter with water. Doing so can result in - NEC NP-PX800X-08ZL | User Manual - Page 187
7. Maintenance 2 Cleaning the Lens • Turn off the projector before cleaning. • Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens. 3 Cleaning the Cabinet Turn off the projector, and unplug the projector before cleaning. • Use a dry soft cloth to wipe - NEC NP-PX800X-08ZL | User Manual - Page 188
glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement. *NOTE: This message will be displayed under the following conditions: • for one minute after the projector has been powered on • when - NEC NP-PX800X-08ZL | User Manual - Page 189
7. Maintenance To replace the lamp: 1. Remove the lamp cover. (1) Loosen the two lamp cover screws. • The lamp cover screw is not removable. (2) Pull the lamp cover towards you and remove it. 2. Remove the lamp housing. (1) Loosen the three screws securing the lamp housing until the phillips - NEC NP-PX800X-08ZL | User Manual - Page 190
Reattach the lamp cover. (1) Replace the lamp cover. (2) Tighten the two screws to secure the lamp cover. • Be sure to tighten the screws. Guide pipe Guide pin Frame Wire This completes the lamp replacement. Go on to the filter replacement. NOTE: When you continue to use the projector for - NEC NP-PX800X-08ZL | User Manual - Page 191
7. Maintenance Replacing the Filters There are two filters, one located at the front of the projector and one on the side. Optional filters (two filter) are available. Small one for the front Large one for the left side NOTE: • Replace both filters with the new ones at the same time. • Before - NEC NP-PX800X-08ZL | User Manual - Page 192
7. Maintenance 3. Insert new filters. 4. Put the filter cover back in. Catches Buttons This completes the filter replacement. Go on to the clearing lamp and filter hour meters. To clear the lamp usage hours and the filter usage hours: 1. Place the projector where you use it. 2. Plug the - NEC NP-PX800X-08ZL | User Manual - Page 193
software The software programs except Image Express Utility 2 for Mac support Windows 7, Windows Vista, and Windows XP. NOTE: • computer. Image Express Utility 2.0 / PC Control Utility Pro 4 1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive. The menu window will be displayed. - NEC NP-PX800X-08ZL | User Manual - Page 194
and click it. 4 Click "Uninstall/Change" or "Uninstall". • When the "User Account Control" windows is displayed, click "Continue". Follow the instructions on the screens to complete the uninstallation. • For Windows XP 1 Click "Start" and then "Control Panel". The Control Panel window will - NEC NP-PX800X-08ZL | User Manual - Page 195
PPT Converter 3.0 1. Connect your computer to the internet and visit our website (http://www.nec-display.com/dl/en/index. html). 2. Download "Virtual Remote Tool" or "Viewer PPT . The installation will start. Follow the instructions on the installer screens to complete the installation. 181 - NEC NP-PX800X-08ZL | User Manual - Page 196
8. User Supportware Installation for Macintosh software Image Express Utility 2 for Mac supports Mac OS X. 1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive. The menu window will be displayed. 2 Double-click the CD-ROM icon. 3 Double-click the "Mac OS X" - NEC NP-PX800X-08ZL | User Manual - Page 197
, projected images can be sent and received between two or more computers. • High-speed, high-quality image transmissions based on NEC's original compression algorithm NEC's original compression algorithm allows high-quality images to be sent over the network at high speed, from your computer to - NEC NP-PX800X-08ZL | User Manual - Page 198
Training Mode (Attendant)" or "Training Mode (Manager)". Connecting the projector to a LAN Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 163), "Connecting to a Wireless LAN" (→ page 164) and "9 Application Menus - NETWORK SETTINGS" (→ page 133 - NEC NP-PX800X-08ZL | User Manual - Page 199
has been set. 2 Click Windows [Start] → [All Programs] → [NEC Projector User Supportware] → [Image Express Utility 2.0] → [Image Express Utility below is displayed when the software is started on a PC installed with Windows XP Service Pack 2 (SP2) (or later). Click "Unblock" if this is displayed. - NEC NP-PX800X-08ZL | User Manual - Page 200
8. User Supportware 4 Check( ) the projector to connect and click [Connect]. If the name of the projector to connect is not on the list or if it is hidden, click [Update]. 4-1 Click 4-2 The screen of your computer will be projected from the projector. Click At this time, the input - NEC NP-PX800X-08ZL | User Manual - Page 201
8. User Supportware • Stopping or resuming the transmission of images The transmission of the screen of the computer to the projector can be temporarily stopped and then resumed. 1 Click the projector icon ( ) on the Windows taskbar. A pop-up menu will be displayed. 2 Click [Stop Sending]. - NEC NP-PX800X-08ZL | User Manual - Page 202
8. User Supportware Holding Conferences • Holding conferences 1 Follow steps 1 through 4 in "Connecting projector" of "Sending Images to Projector" (→ page 185). The screen of your computer will be projected from the projector. • Disclose a file to the participants of the conference. NOTE: To - NEC NP-PX800X-08ZL | User Manual - Page 203
in conferences 1 Click Windows [Start] → [All Programs] → [NEC Projector User Supportware] → [Image Express Utility 2.0] → [Image Express one below is displayed when the software is started on a PC installed with Windows XP Service Pack 2 (SP2) (or later). Click "Unblock" if this is displayed. 2 - NEC NP-PX800X-08ZL | User Manual - Page 204
8. User Supportware 3 Click the Meeting Name to participate, and click [Connect]. 3 Click The computer will be connected to the selected conference and the attendant window will be displayed. If the presenter selects "Send to PC And Projector", the image projected from the projector is - NEC NP-PX800X-08ZL | User Manual - Page 205
8. User Supportware • Saving received images 1 Click [Memo] in the attendant window. A memo pane will be displayed. 2 Click Memo pane 1 2 Click [Save Image] in the attendant window. The image displayed in the attendant window will be saved. • The saved image is added to the memo list and - NEC NP-PX800X-08ZL | User Manual - Page 206
8. User Supportware • Downloading disclosed file 1 Click [File Transfer] in the attendant window. The "File Transfer" window will be opened. 1 2 Select a file to download, and click [Download]. Downloading will begin. The progress of the downloading is displayed at the lower left of the - NEC NP-PX800X-08ZL | User Manual - Page 207
8. User Supportware • Changing presenter Three types of settings may be made to change the presenter: "Not Approved", "Approved", and "Changing Prohibited" (these can be selected only by the presenter). In the following example, "Not Approved" is selected. • Click [Become A Presenter] in the - NEC NP-PX800X-08ZL | User Manual - Page 208
the projector to a LAN. Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 163), "Connecting to a Utility Pro 4 Click "Start" → "All programs" or "Programs" → "NEC Projector User Supportware" → "PC Control Utility Pro 4" → "PC Control Utility - NEC NP-PX800X-08ZL | User Manual - Page 209
screen colors 32 thousands of colors, 16.7 million colors required * 256 or fewer colors are not supported. Connecting the projector to a LAN Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 163), "Connecting to a Wireless LAN" (→ page 164) and - NEC NP-PX800X-08ZL | User Manual - Page 210
8. User Supportware Using Image Express Utility 2 Connecting to a projector 1 Confirm that the projector has been turned on. 2 Click the AirPort status ( ) on the Macintosh menu bar, and click "Turn AirPort On". " or " ". The AirPort status is changed to " • AirPort status types and meanings - NEC NP-PX800X-08ZL | User Manual - Page 211
8. User Supportware 3 Double-click the "Image Express Utility 2" icon in the "Image Express Utility 2" folder. • At the initial start, the "License Agreement" window is displayed. Thoroughly read the agreement shown on the screen, and click "I accept the terms in the license agreement" and the - NEC NP-PX800X-08ZL | User Manual - Page 212
8. User Supportware Stopping/Restarting Image Transmission • Stopping image transmission 1 Click [Tools] on the menu bar, and click [Stop Sending]. Image transmission is temporarily stopped. • Restarting image transmission 1 Click [Tools] on the menu bar, and click [Start Sending]. Image - NEC NP-PX800X-08ZL | User Manual - Page 213
connection. • To download or update Virtual Remote Tool, visit our website: http://www.nec-display.com/dl/en/index.html Connect the projector to a LAN. Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 163), "Connecting to a Wireless LAN (sold - NEC NP-PX800X-08ZL | User Manual - Page 214
icon • Double-click the shortcut icon on the Windows Desktop. Start from the Start menu • Click [Start] → [All Programs] or [Programs] → [NEC Projector User Supportware] → [Virtual Remote Tool] → [Virtual Remote Tool]. When Virtual Remote Tool starts for the first time, "Easy Setup" window will - NEC NP-PX800X-08ZL | User Manual - Page 215
Click "Help". The Help screen will be displayed. • Displaying the help file using the Start Menu. 1. Click "Start". "All programs" or "Programs". "NEC Projector User Supportware". "Virtual Remote Tool". and then "Virtual Remote Tool Help" in this order. The Help screen will be displayed. 201 - NEC NP-PX800X-08ZL | User Manual - Page 216
3.0 Help to unregister the add-in. • The projector does not support the add-in's "Run Slide Show". Converting PowerPoint files and saving computer. 2. On Windows, click "Start" → "All programs" → "NEC Projector UserSupportware" → "Viewer PPT Converter 3.0" → "Viewer PPT Converter 3.0". Viewer - NEC NP-PX800X-08ZL | User Manual - Page 217
8. User Supportware 5. Select the USB memory drive for "Card Drive" and type in "Index name". Index name must be eight alphanumeric characters or less. 2-byte character and file with a long filename cannot be used. 6. Click "Export". A confirmation message will be displayed. 7. Click "OK". - NEC NP-PX800X-08ZL | User Manual - Page 218
for the installation environment (screen size and throw distance). For instructions on mounting the lens, see page 154. Each number provided in lens surface and the screen. Tables of screen sizes and dimensions [PX750U/PX700W] Size (inches) Screen height 16:10 screen size (diagonal) Screen width - NEC NP-PX800X-08ZL | User Manual - Page 219
9. Appendix Lens types and throw distance unit = m [PX750U] Screen size 50" 60" 80" 100" 120" 150" 200" 240" 300" NP16FL 0.8 1.0 1.3 1.7 2.0 2.5 3.4 4.1 5.1 NP17ZL 1.3 - 1.9 1.6 - 2.3 2.2 - 3.1 2.7 - 3.9 3.3 - 4.7 4.1 - 5.8 5.5 - 7.8 6.6 - 9.4 8.2 - 11.7 Lens model name NP18ZL NP19ZL 1.8 - 2.4 2.4 - - NEC NP-PX800X-08ZL | User Manual - Page 220
to the screen width. * Figures differ by several % with the table above because the calculation is approximate. Projection range for the different lenses [PX700W] NP06FL : 0.8-3.5m 50-200" 40-500" 40-500" NP07ZL : 1.1-19.9m NP08ZL : 1.5-26.2m NP09ZL : 1.9-49.9m 40-500" 40-500" NP10ZL : 3.8-92 - NEC NP-PX800X-08ZL | User Manual - Page 221
9. Appendix [PX800X] Screen size NP06FL 40" 50" 60" 80" 100" 120" 150" 200" 240" 300" 350" 400" 450" 500" 0.8 0.9 1.3 1.6 1.9 2.4 3.2 NP07ZL 1.1 - 1.4 1.3 - 1.8 1.6 - 2.2 2.2 - 2.9 2.7 - 3.7 3.3 - 4.4 4.1 - 5.5 5.5 - 7.4 6.6 - 8.9 8.2 - 11.1 9.6 - 13.0 11.0 - 14.8 12.4 - 16.7 13.8 - 18.6 Lens model - NEC NP-PX800X-08ZL | User Manual - Page 222
), H indicates horizontal (width of the projected image). NOTE: The lens shift function cannot be used when using the NP16FL (PX750U) and NP06FL (PX700W/PX800X) lens. Desk/front projection Width of projected image 0.5V 1V Height of projected image 0.1H 1H 0.1H Ceiling/front projector 0.1H 1H - NEC NP-PX800X-08ZL | User Manual - Page 223
to match the source. To replace the color wheel, refer to the following guide. CAUTION: Before replacing the color wheel, be sure to turn off the projector . • Do not remove screws except when specified in the following instructions • Heed the following information if you own two or more projectors - NEC NP-PX800X-08ZL | User Manual - Page 224
9. Appendix 2. Remove the color wheel (6-segment white). • Loosen the four screws on the color wheel. • The screws are captive and not removable. • Lift up the color wheel (6-segment white) 3. Install the supplied color wheel (6-segement color). • Insert the supplied color wheel. • - NEC NP-PX800X-08ZL | User Manual - Page 225
9. Appendix 4. Replace the color wheel cover. • Insert the two tabs of the color wheel into the two grooves of the cabinet. Tabs Grooves • Tighten the screw. • Be sure to tighten the screw. NOTE: Improper (loose) installation of the color wheel prevents an image from being displayed. - NEC NP-PX800X-08ZL | User Manual - Page 226
9. Appendix ❸ Mounting the Optional Board (sold separately) CAUTION Before mounting or removing the optional board, be sure to turn off the projector, wait for the fans to stop and turn off the main power switch. Tool needed: Phillips screwdriver (plus-head) The SB-01HC board is used as an example. - NEC NP-PX800X-08ZL | User Manual - Page 227
screws on both sides of the slot. • Be sure to tighten the screws. This will complete installation of the optional board. Refer to the user's manual included with the board for source selection. NOTE: • Mounting the optional board may cause the fans to run in the standby mode for the purpose - NEC NP-PX800X-08ZL | User Manual - Page 228
9. Appendix Compatible Input Signal List Analog RGB VGA SVGA XGA XGA+ WXGA Signal Resolution ( dots ) 640 × 480 800 × 600 1024 × 768 1152 × 864 1280 × 768 1280 × 800 1360 × 768 *1 1366 × 768 *1 1280 × 960 1280 × 1024 1400 × 1050 1440 × 900 1600 × 900 1600 × 1200 1680 × 1050 1920 × 1200 1280 × 720 - NEC NP-PX800X-08ZL | User Manual - Page 229
9. Appendix DisplayPort VGA SVGA XGA HD WXGA Signal Resolution ( dots ) 640 × 480 800 × 600 1024 × 768 1280 × 720 1280 × 768 1280 × 800 1366 × 768 *1 1280 × 960 1280 × 1024 1400 × 1050 1440 × 900 1600 × 900 1680 × 1050 1600 × 1200 1920 × 1080 1920 × 1200 1920 × 1080 1280 × 720 720 × 480 720 × 576 - NEC NP-PX800X-08ZL | User Manual - Page 230
with ISO21118-2005 Electrical Model Name Inputs PX750U PX700W PX800X PX750UG PX700WG PX800XG 2 × RGB/Component (mini D-Sub 15P), 5 × BNC, 1 × HDMI Type A (HDMI® Connector) HDCP supported*4, 1 × DisplayPort(20pin connecter) HDCP supported*4, 1 × S-Video (DIN 4P), 1 × Video (BNC) 1 × Option Slot - NEC NP-PX800X-08ZL | User Manual - Page 231
Current Power Con- ECO Dual lamp sumption MODE OFF (NORMAL) Single lamp PX750U PX700W PX800X PX750UG PX700WG PX800XG Separate Sync / Composite Sync / Sync on Green 100 .necdisplay.com/ Europe : http://www.nec-display-solutions.com/ Global : http://www.nec-display.com/global/index.html For information - NEC NP-PX800X-08ZL | User Manual - Page 232
121.9 mm Image Size (Diagonal): 50-300 inches / 1.27-7.62 m Projection Distance (Min.-Max.): 5.59-35.04 m NP17ZL NP18ZL NP19ZL NP20ZL NP21ZL [PX700W/PX800X] NP06FL Power focus throw ratio 0.77:1, F2.0, f = 11.4 mm Image Size (Diagonal): 50-200 inches / 1.27-5.08m Projection Distance (Min.-Max - NEC NP-PX800X-08ZL | User Manual - Page 233
9. Appendix Cabinet Dimensions Unit: mm (inch) Lens center 504 (19.8) 252 (9.9) 192 (7.6) 516 (20.3) Lens center 220 (8.7) 150 (5.9) 150 (5.9) 109 (4.3) Holes for ceiling mount 219 150 (5.9) 150 (5.9) 117.4 (4.62) - NEC NP-PX800X-08ZL | User Manual - Page 234
9. Appendix Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector 11 12 13 14 15 7 8 9 10 1 2 3 4 5 6 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RGB Signal (Analog) Red Green or Sync on Green Blue - NEC NP-PX800X-08ZL | User Manual - Page 235
9. Appendix Troubleshooting This section helps you resolve problems you may encounter while setting up or Mount it properly. (→ Page 176) The cooling fan has stopped turning. Contact an NEC projector customer support center for repairs. It is not possible to connect the projector's built-in LAN - NEC NP-PX800X-08ZL | User Manual - Page 236
service problem Temperature problem Procedure The temperature protector has been activated. If the room temperature is high, move the projector to a cool place. If the TEMP. indicator still be flashing when the projector is used at operating temperatures, contact an NEC projector customer support - NEC NP-PX800X-08ZL | User Manual - Page 237
guide accompanied with your computer or graphics card, or contact the support center for your computer manufacturer. Install the updated driver or OS on your own responsibility. We are not liable for any trouble supported by the projector. (→ page 214) • Adjust the computer image manually - NEC NP-PX800X-08ZL | User Manual - Page 238
POWER/STATUS/LAMP Indicator. (→ page 221) • Press the AUTO ADJ. button on the projector cabinet or the remote control. (→ page 28) • Adjust the computer image manually with [CLOCK]/[PHASE] in [IMAGE OPTIONS] in the menu. (→ page 104) For more information contact your dealer. 224 - NEC NP-PX800X-08ZL | User Manual - Page 239
external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn setting display modes other than those supported by your Macintosh and the projector, is off on your PowerBook. Refer to owner's manual supplied with your Macintosh computer for mirroring. • Folders - NEC NP-PX800X-08ZL | User Manual - Page 240
9. Appendix PC Control Codes and Cable Connection PC Control Codes Function POWER ON POWER OFF INPUT SELECT COMPUTER 1 INPUT SELECT COMPUTER 2 INPUT SELECT COMPUTER 3 INPUT SELECT HDMI INPUT SELECT DisplayPort INPUT SELECT VIDEO INPUT SELECT S-VIDEO INPUT SELECT VIEWER INPUT SELECT - NEC NP-PX800X-08ZL | User Manual - Page 241
service personnel, check the following list to be sure repairs are needed also by referring to the "Troubleshooting" section in your user's manual. This checklist below will help us solve your problem contrast. Input source's resolution and frequency are supported by the projector. Image is too dark. - NEC NP-PX800X-08ZL | User Manual - Page 242
9. Appendix In the space below please describe your problem in detail. Information on application and environment where , Video camera, Video game or other Manufacturer: Model number: Signal cable NEC standard or other manufacturer's cable? Model number Length inch/m Distribution amplifier Model - NEC NP-PX800X-08ZL | User Manual - Page 243
9. Appendix TravelCare Guide TravelCare - a service for international travelers This product is eligible for "TravelCare", NEC's unique international warranty and repair service. For more information on TravelCare service, visit our website (in English only). http://www.nec-display.com/dl/en/ - NEC NP-PX800X-08ZL | User Manual - Page 244
© NEC Display Solutions, Ltd. 2011 7N951651
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
 |
 |
Projector
PX750U/PX700W/PX800X
User’s Manual
Model No.
NP-PX750U, NP-PX750UG, NP-PX700W, NP-PX700WG, NP-
PX800X, NP-PX800XG
• Theprojector’sModelNo.indicatedontheprojector’slabelisNP-
PX750U, NP-PX750UG, NP-PX700W, NP-PX700WG, NP-PX800X,
andNP-PX800XGrespectively.
EachmodelisreferredtoasPX750U,PX700W,andPX800Xre
-
spectivelyunlessotherwisespeciFed.