NEC NP-UM351W User's Manual - Page 8
STANDBY MODE Factory preset: NORMAL, AUTO POWER OFF Factory preset: 1 hour, Important Information
View all NEC NP-UM351W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Important Information Power management function The projector has power management functions. To reduce power consumption, the power management functions (1 and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable connection, use the on-screen menu to change the settings for 1 and 2. 1. STANDBY MODE (Factory preset: NORMAL) To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE]. NOTE: • When [NORMAL] is selected for [STANDBY MODE], the following connectors and functions will not work: MONITOR OUT connector, AUDIO OUT connector, USB(PC) port, LAN functions, Mail Alert function, DDC/CI (Virtual Remote Tool). Please refer to page 94 about details. 2. AUTO POWER OFF (Factory preset: 1 hour) To control the projector from an external device, select [OFF] for [AUTO POWER OFF]. NOTE: • When [1:00] is selected for [AUTO POWER OFF], you can enable the projector to automatically turn off in 60 minutes if there is no signal received by any input or if no operation is performed. vi