NEC NP1150 NP1200 : NP3250CM installation instructions
NEC NP1150 - XGA LCD Projector Manual
 |
UPC - 805736019568
View all NEC NP1150 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC NP1150 manual content summary:
- NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 1
Display Solutions of America, Inc. Installation and Assembly - Ceiling Mount for NEC NP1150, NP2150, NP3150, NP3151W, NP1250, NP2250, NP3250 and NP3250W Projector Model: NP3250CM Maximum Load Capacity: 50 lb (22.7 kg) Features: • ImageLockTM alignment prevents picture sag or drift • Wrench access - NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 2
understands these instructions. • Make sure that the supporting surface will safely support the combined Ceilings ...4 Installation to Concrete Ceilings ...5 Installation to Threaded Rods ...6 Installation to Extension Columns / Ceiling Plate ...7 Attaching Adapter Plate to Projector ...8 Projector - NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 3
K Note: Actual parts may appear slightly different than illustrated. 1 Disengage connection block from projector mount assembly (A) by unscrewing captive screw and sliding out connection block as shown. A CAPTIVE SCREW CONNECTION BLOCK 3 of 9 Visit the Peerless Web Site at www.peerlessmounts - NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 4
Ceilings WARNING • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that projector mount OF MOUNT A E ARROW ON TOP OF PROJECTOR MOUNT ASSEMBLY INDICATES FRONT OF MOUNT F - NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 5
verify that the wall will safely support four times the combined weight of all attached equipment and hardware. Skip to step 6. G A E F ARROW ON TOP OF PROJECTOR MOUNT ASSEMBLY INDICATES FRONT OF MOUNT WARNING • Concrete anchors are not intended for attachment to concrete ceiling covered with - NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 6
threaded rods (not included) to the desired height of projector mount assembly. Attach projector mount assembly (A) to the two 1/4-20 threaded rods using NYLON-INSERT LOCKNUT (NOT INCLUDED) A ARROW INDICATES FRONT OF MOUNT A ARROW INDICATES FRONT OF MOUNT fig. 4.1 1/4-20 HEX THIN NYLON-INSERT - NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 7
Installation to Extension Column / Ceiling Plate 5 NOTE: Refer to accompanying instructions with ceiling plates (sold separately) for installing these models to ceiling. Screw projector mount assembly (A) onto extension column as shown in figure 5.1. NOTE: For 3/4" extension columns, reducer ACC - NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 8
in adapter plate. Attach adapter plate (I) to connection block from projector mount assembly (A) using two #10-32 x 3/8" serrated washer head socket pin screws (C) as shown. NOTCH INDICATES FRONT OF PROJECTOR CONNECTION BLOCK SHOULDER I C 7 Note: The projector you are installing may differ in - NEC NP1150 | NP1200 : NP3250CM installation instructions - Page 9
projector mount. 8 Slide connection block with projector into projector mount assembly (A) as shown. Tighten captive screw to secure projector to projector mount Loosen screw on projector mount assembly (A) indicated below until projector mount can be rotated. Rotate mount to desired position and
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
ISSUED: 06-16-09
SHEET #: 055-XXXX-1
Visit the Peerless Web Site at www.peerlessmounts.com
1 of 9
For customer care call 1-800-729-0307 or 708-865-8870.
Maximum Load Capacity:
50 lb (22.7 kg)
Model: NP3250CM
Features:
• ImageLock
TM
alignment prevents picture sag or drift
•
Wrench access slot for easier flush mount installations
•
Exclusive aluminum track quick release
NEC Display Solutions of America, Inc.
Installation and Assembly - Ceiling Mount for NEC
NP1150, NP2150, NP3150, NP3151W, NP1250, NP2250,
NP3250 and NP3250W Projector