NEC NP1150 NP1200 : NP3250CM installation instructions - Page 8

6 Align shoulder on connection block opposite notch in adapter plate. Attach adapter plate (I) to connection block from projector mount assembly (A) using two #10-32 x 3/8" serrated washer head socket pin screws (C) as shown. NOTCH INDICATES FRONT OF PROJECTOR CONNECTION BLOCK SHOULDER I C 7 Note: The projector you are installing may differ in appearance from the sample illustrated below. *Notch indicates front of projector. Flip projector upside down. Fasten adapter plate (I) by using four spacers (K) and four M4 x 25 mm serrated socket pin screws (J) as shown below. Tighten M4 x 25 mm serrated socket pin screws (J) using 4 mm allen wrench (B). J I 8 of 9 Visit the Peerless Web Site at www.peerlessmounts.com Accessories listed in the included sheet, as well as other parts, can be ordered through Peerless by calling 1-800-729-0307 or visiting www.peerlessmounts.com. Spacers (K) go between adapter plate and projector. ISSUED: 03-06-06 SHEET #: 055-9452-1 For customer care call 1-800-729-0307 or 708-865-8870.