NEC PX-50XR5A 50XR5 UM - Page 6

Model Signal Type Work Station (SGI) IDC-3000G PAL625P NTSC525P Dots ‫ ן‬lines Vertical frequency Horizontal frequency (Hz) (kHz) 1024‫ן‬768 60.0 49.7 1280‫ן‬1024 60.0 63.9 768‫ן‬576 50.0 31.4 640‫ן‬480 59.9 31.5 1152‫ן‬864 60.0 53.7 72.0 64.9 1400‫ן‬1050 60.0 65.3 75.0 82.3 85.0 93.9 Sync Polarity Horizontal Vertical - - - - - - - - NEG NEG POS POS NEG NEG NEG NEG NEG NEG NEG POS POS POS Presence Horizontal Vertical - - - - - - - - Screen mode NORMAL ANAMORPHIC (4:3) (16:9) YES*3 YES YES*4 YES RGB select*5 - - - - Memory 62 29 YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES*7 YES*7 YES YES YES YES YES YES*7 - - 31 YES*7 640‫ן‬480 32 YES 1152‫ן‬864 84 YES - - 85 YES - - 65 YES - - 71 YES - - 72 *1 Only when using a graphic accelerator board that is capable of displaying 852‫ן‬480. *2 This signal is converted to a 1024 dots‫ן‬640 lines signal. *3 The picture is displayed in the original resolution. *4 The aspect ratio is 5:4. This signal is converted to a 960 dots‫ן‬768 lines signal. *5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above. *6 To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer's video port. *7 Other screen modes (ZOOM and STADIUM) are available as well. *8 When viewing a moving picture at a vertical frequency greater than 65Hz, the picture may sometimes be unstable (jumpy). If this occurs, please set the refresh rate of the external equipment to 60Hz. *9 CVT standard compliant. NOTE: • While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture or the fine picture because of errors in synchronization of your computer. • When a 1280 dots‫ן‬1024 lines signal or 1600 dots‫ן‬1200 lines signal is input to the monitor, the picture will be compressed. • This monitor has a resolution of 1365 dots‫ן‬768 lines. It is recommended that the input signal should be XGA, wide XGA, or equivalent. • With digital input some signals are not accepted. • The sync may be disturbed when a nonstandard signal other than the aforementioned is input. • If you are connecting a composite sync signal, use the HD terminal. • "IBM PC/AT" and "XGA" are registered trademarks of International Business Machines, Inc. of the United States. • "Apple Macintosh" is a registered trademark of Apple Computer, Inc. of the United States. En-4