Netgear APS1000W Product Data Sheet
Netgear APS1000W Manual
 |
View all Netgear APS1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear APS1000W manual content summary:
- Netgear APS1000W | Product Data Sheet - Page 1
Chassis M6100 series delivers L2/L3/L4 and IPv4/IPv6 rich services for enterprise edge and SMB core deployments, as well as 1G • Only 4U height (7 inches - 17.59cm) and 17.39 inches depth (44.16cm) • Supports 144 RJ45 10/100/1000 ports, or 120 SFP 100/1000 ports, or 72 RJ45 10GBASE-T ports, - Netgear APS1000W | Product Data Sheet - Page 2
; management and fabric 1+1 redundancy with hitless failover and non-stop forwarding. Supports a maximum of 144 RJ45 10/100/1000 ports or 120 SFP 100/1000 Blade - (service port) 1 x Mini-USB - 24 16 (shared with 10GBASE-T) - ACCESSORIES Model name Form-Factor Notes XCM89P Daughter Card - Netgear APS1000W | Product Data Sheet - Page 3
• Sliding rails kit for 4-post racks and wiring cabinets Ordering SKU number (worldwide): XCM8903SK-10000S M6100-44G3-POE+ Starter Kit • 1 blade 40x1G + 4x10G (XCM8944) • 1 PoE+ daughter card (XCM89P) XCM8903SF-10000S M6100-44GF3 Starter Kit • 1 blade 40xSFP + 4x10G (XCM8944F) XCM8903SX - Netgear APS1000W | Product Data Sheet - Page 4
files • Dual firmware image and configuration file for updates with minimum service interruption • Industry standard command line interface (CLI) for IT admins support NETGEAR M6100 series warranty and support: • NETGEAR ProSAFE Lifetime Hardware Warranty* • Included Lifetime Technical Support - Netgear APS1000W | Product Data Sheet - Page 5
access control list, classification, filtering, IPv4/IPv6 routing, IPv6 transition services) are performed in hardware at interface line rate for voice, video movemanagement ) or in GUI, for more control Any M6100 I/O blades support hot-plug and hot-swap and can be inserted in any slot of - Netgear APS1000W | Product Data Sheet - Page 6
in the phone source MAC address; providing the best class of service to VoIP streams (both data and signaling) over other ordinary traffic backward compatilibity with 802.3af • XCM89P daughter card supports PoE (802.3af) and PoE+ (802.3at) • XCM89UP daughter card supports PoE (802.3af), PoE+ ( - Netgear APS1000W | Product Data Sheet - Page 7
crossover or straightthrough cables dynamically for the admin IPv6 full support with IPv6 host, dual stack (IPv4 and IPv6), multicasting updates / configuration changes with minimum service interruption Flexible Port-Channel/LAG ( "Clear" commands help troubleshoot connectivity issues and restore - Netgear APS1000W | Product Data Sheet - Page 8
for convergence Audio (Voice over IP) and Video (multicasting) comprehensive switching, filtering, routing and prioritization Auto-VoIP, Voice VLAN and LLDP-MED support for IP phones QoS and VLAN configuration IGMP Snooping and Proxy for IPv4, MLD Snooping and Proxy for IPv6 and Querier mode - Netgear APS1000W | Product Data Sheet - Page 9
processes DHCP messages and generates new DHCP messages • Supports DHCP Relay Option 82 circuit-id and remote- can be configured as pingable to help troubleshoot network connectivity issues • In that case, • Router discovery eliminates the need to manually configure a default gateway on each host - Netgear APS1000W | Product Data Sheet - Page 10
not advertise any LSAs with area or AS scope in its database description packets sent to neighbors OSPF Transit-Only Network Hiding is supported based on RFC 6860 with transit-only network defined as a network connecting only routers • Transit-only networks are usually configured with routable IP - Netgear APS1000W | Product Data Sheet - Page 11
of ICMP messages ets to a malicious monitor, or to cause Denial of Service (DoS) by blackholing the packets • ICMP Echo Requests and other messages that take CPU and bandwidth Border Gateway Protocol version 4 (BGP4) is supported for typical routed data center topologies (IPv4 and IPv6) up to max - Netgear APS1000W | Product Data Sheet - Page 12
core" in a multi-tenancy environment: customer VLAN IDs are preserved and a service provider VLAN ID is added to the traffic so the traffic can pass the metro time-based ACLs for best granularity Single Rate Policing feature enables support for Single Rate Policer as defined by RFC 2697 • - Netgear APS1000W | Product Data Sheet - Page 13
to auto-downstream devices • ETS may be configured on a port in manual mode and M6100 switch may become the source for ETS configuration in by preventing FCoE MAC spoofing The FIP Snooping Bridge solution in M6100 supports the interior port role, the perimeter port role and the FCF-facing - Netgear APS1000W | Product Data Sheet - Page 14
ProSAFE® LAN Access and Aggregation Chassis Switches Target Application Data Sheet M6100 series Fiber, 10GBase-LR single mode Fiber, 10GBase-SR multimode Fiber, 10GBase-LRM multimode Copper, 10GBase-T RJ45 Cat6a Copper, Gigabit RJ45 Cat5 Copper, Gigabit PoE RJ45 Cat5 M6100 Series M6100 Series - Netgear APS1000W | Product Data Sheet - Page 15
• L2/L3/L4 routing as standard - NO additional licensing costs or annual maintenance contracts to inflate prices and jeopardise sales Class leading support services as standard • All M6100 Chassis series products come with Lifetime Warranty, Lifetime Next Business Day and Lifetime Technical online - Netgear APS1000W | Product Data Sheet - Page 16
XCM8944 I/O Blade Ordering information • Worldwide: XCM8944-10000S • Warranty: Lifetime FRONT: Base chassis without blank panels BACK: Base chassis without fan tray • 48-port 10/100/1000BASE-T RJ45 • PoE, PoE+ and UPOE available as an option with XCM89P or XCM89UP daughter card • 40-port 10/100 - Netgear APS1000W | Product Data Sheet - Page 17
• 2-port 1000BASE-X/10GBASE-X SFP+ (independent) XCM8924X I/O Blade Ordering information • Worldwide: XCM8924X-10000S • Warranty: Lifetime XCM89P Daughter Card Ordering information • Worldwide: XCM89P-10000S • Warranty: Lifetime • 24-port 100/1000/10GBASE-T RJ45 • 16-port 1000BASE-X/10GBASE-X SFP - Netgear APS1000W | Product Data Sheet - Page 18
Unit Ordering information • Americas, Europe: APS1000W-100NES • Asia Pacific: APS1000W-100AJS • Warranty: 5 years AFT603 Fan Tray Ordering information • Worldwide: AFT603-10000S • Warranty: 5 years • C15 connector • Capacity: --110V-240V AC power input --Up to 640W output power at 110V AC --Up to - Netgear APS1000W | Product Data Sheet - Page 19
-POE+ (XCM8903SK) Starter Kit Ordering information • Worldwide: XCM8903SK-10000S Front view • RPS4000 is 1RU unit with four (4) empty Base chassis (XCM8903) --1 blade 40x1G + 4x10G (XCM8944) --1 PoE+ daughter card (XCM89P) --1 power supply unit (APS1000W) --1 fan tray front to back (AFT603) --2 - Netgear APS1000W | Product Data Sheet - Page 20
--Handles for rack-mount kit --Rack-mount kit for 2-post racks M6100-24X3 (XCM8903SX) Starter Kit Ordering information • Worldwide: XCM8903SX-10000S Starter kit components ship in their individual packaging: --M6100-3S Base chassis (XCM8903) --1 blade 24x10GBASE-T and 16 shared SFP+ (XCM8924X - Netgear APS1000W | Product Data Sheet - Page 21
FX IEEE 802.3 LC duplex connector up to 2km (1.24 miles) AFM735-10000S (1 unit) AGM734 1000Base-T Gigabit RJ45 SFP Ordering information • Worldwide: AGM734-10000S • Warranty: 5 years • 1 port Gigabit RJ45 for XCM8944F blade (SFP ports) • Supports only 1000Mbps full-duplex mode • Up to 100m (328 ft - Netgear APS1000W | Product Data Sheet - Page 22
(9.8 ft) AXC761 10GSFP+ Cu (passive) SFP+ connectors on both end AXC763 10GSFP+ Cu (passive) SFP+ connectors on both end AXC761-10000S (1 unit) AXC763-10000S (1 unit) • Fits into XCM8944, XCM8944F SFP+ interfaces • Fits into XCM2924X SFP+ interfaces Data Sheet M6100 series Page 22 of 48 - Netgear APS1000W | Product Data Sheet - Page 23
1U Power Shelf Model number XCM8903 XCM8948 XCM8944 XCM8944F XCM8924X XCM89P XCM89UP APS1000W AFT603 RPS4000v2 Auto-sensing RJ45 10/100/1000BASE 1000/ 10GBASE-T - 40 - 2 - 40 2 - - 24 Console ports Service port (Out-of-band Ethernet) Serial RS232 RJ45 (straight-through wiring); Mini-USB - Netgear APS1000W | Product Data Sheet - Page 24
6 x PSU (APS1000W) 7 x PSU (APS1000W) 8 x PSU (APS1000W) Features Support IEEE 802.3af (up to 15.4W per port) IEEE 802.3at (up to 30W W 2,800 W 3,920 W 3,360 W 4,480 W 3,920 W Blades equipped with XCM89P daughter card Yes Yes Yes Yes - Yes PSU deliveredWattage @220V N N+1 910 W - - Netgear APS1000W | Product Data Sheet - Page 25
ProSAFE® LAN Access and Aggregation Chassis Switches Data Sheet M6100 series Fail back PERFORMANCE SUMMARY Switching fabric M6100-3S chassis Type Switching / Routing capacity M6100-3S Chassis Throughput M6100-3S Chassis (intra-blade) M6100-3S Chassis (inter-blade) Latency XCM8948 (10Mbps, Copper) - Netgear APS1000W | Product Data Sheet - Page 26
IPv4 IPv6 Number of IP interfaces (port or VLAN) Jumbo frame support Acoustic noise (ANSI-S10.12) M6100-3S Base Chassis Heat Dissipation blade XCM8924X blade XCM89P daughter card (PoE+) XCM89UP daughter card (UPOE) APS1000W power supply unit AFT603 fan tray L2 SERVICES - VLANS IEEE - Netgear APS1000W | Product Data Sheet - Page 27
Loop Guard STP Root Guard BPDU Guard STP BPDU Filtering STP BPDU Flooding L2 SERVICES - MULTICAST FILTERING IGMPv2 Snooping Support IGMPv3 Snooping Support MLDv1 Snooping Support MLDv2 Snooping Support Expedited Leave function Static L2 Multicast Filtering IGMP Snooping Enable IGMP Snooping per - Netgear APS1000W | Product Data Sheet - Page 28
mode) PIM-DM (IPv6) PIM-SM (Multicast Routing - sparse mode) PIM-SM (IPv6) PIM multi-hop RP support PIM Timer Accuracy PIM-SM Unhandled Events IPMC replication (hardware support) L3 SERVICES - DHCP DHCP IPv4 / DHCP IPv6 Client DHCP IPv4 / DHCP IPv6 Server (Stateless, Stateful) DHCP Snooping IPv4 - Netgear APS1000W | Product Data Sheet - Page 29
Client Border Gateway Protocol version 4 (BGP) Support of typical routed cata center topologies BGP Route Reflection DoS Broadcast, Unicast, Multicast DoS Protection Denial of Service Protection (control plane) Denial of Service Protection (data plane) IPv4/IPv6 Yes Yes Yes Yes - Netgear APS1000W | Product Data Sheet - Page 30
Yes Yes Yes Yes Yes Yes MAC, IPv4, IPv6, TCP, UDP Yes Yes Yes Yes Up to 48 clients (802.1x) per port are supported, including the authentication of the users domain Supplemental authentication mechanism for non802.1x devices, based on their MAC address only Dot1x-> MAP -> Captive Portal successive - Netgear APS1000W | Product Data Sheet - Page 31
for IPv6 fields DiffServ QoS Edge Node applicability Interior Node applicability 802.3ad (LAG) for service interface Support for IPv6 fields Ingress/Egress IEEE 802.1p COS 802.3ad (LAG) for COS configuration WRED (Weighted Deficit Round Robin) Strict Priority - Netgear APS1000W | Product Data Sheet - Page 32
, inbound Mixed IPv4/IPv6 ACLs per interface, inbound Mixed IPv4/IPv6 ACLs per interface, outbound QOS - DIFFSERV FEATURE SUPPORT DiffServ Supported Class Type All Class Match Criteria COS COS2 (Secondary COS) Destination IP (for Mask - Netgear APS1000W | Product Data Sheet - Page 33
Police Simple Police Single-Rate Police Two-Rate Police Color Aware Mode Redirect (to supported interface types only) Service Interface Inbound Slot.Port configurable Inbound 'All' Ports configurable Outbound Slot.Port configurable Outbound - Netgear APS1000W | Product Data Sheet - Page 34
Traffic Shaping (for whole egress interface) Yes Minimum Bandwidth Yes Weighted Deficit Round Robin (WDRR) Support Yes Maximum Queue Weight 127 WRED Support Yes FUNCTIONAL SUMMARY - IETF RFC STANDARDS AND IEEE NETWORK PROTOCOLS Core Management RFC 854 - Telnet - Netgear APS1000W | Product Data Sheet - Page 35
vendor extensions RFC 2865 - RADIUS client RFC 2866 - RADIUS accounting RFC 2868 - RADIUS attributes for tunnel protocol support RFC 2869 - RADIUS extensions RFC 28869bis - RADIUS support for Extensible Authentication Protocol (EAP) RFC 3164 - The BSD syslog protocol RFC 3580 - 802.1X RADIUS usage - Netgear APS1000W | Product Data Sheet - Page 36
IP address - Destination IP address - TCP/UDP source port - TCP/UDP destination port - IPv6 flow label - IP protocol number Quality of Service - Access Control Lists (ACLs) Direct user configuration of the following: - IP DSCP to traffic class mapping - IP precedence to traffic - Netgear APS1000W | Product Data Sheet - Page 37
- Basic socket interface for IPv6 RFC 6583 - Operational Neighbor Discovery Problems Data Center IEEE 802.1Qaz Draft 2.4 - DCBX (Data Center /TIA 1057 - LLDP-MED MIB RFC 2213 - Integrated Services MIB FASTPATH Enterprise MIBs supporting switching features RFC 2233 - IF-MIB FASTPATH-MMRP-MIB - Netgear APS1000W | Product Data Sheet - Page 38
the Ethernet-like interface types Routing Package MIBs FASTPATH Enterprise MIBs supporting routing features IANA-Address-Family-Numbers-MIB RFC 1724 - RIP Membership Discovery MIB (both IGMP and MLD) FASTPATH Enterprise MIBs supporting multicast features FASTPATH-BGP-MIB - Private MIB for FASTPATH - Netgear APS1000W | Product Data Sheet - Page 39
Chassis Switches Data Sheet M6100 series CLI commands logged to a Syslog server Web-based graphical user interface (GUI) Features without Web GUI support PV(R)STP Authorization List Control Plane ACL DCBX Priority Flow Control ETS FIP Snooping UDLD Policy Based Routing LLPF BGP QoS Policy for - Netgear APS1000W | Product Data Sheet - Page 40
HTTPS Max Sessions HTTP Download (firmware) Email Alerting Syslog (RFC 3164) Persistent log supported USER ADMIN MANAGEMENT User ID configuration Max number of configured users Support multiple READWRITE Users Max number of IAS users (internal user database) Authentication login lists - Netgear APS1000W | Product Data Sheet - Page 41
Classes IEEE 802.1x Number of .1x clients per port Number of LAGs Maximum multiple spanning tree instances MAC based VLANS Number supported Number of network buffers Number of log messages buffered Static filter entries Unicast MAC and source port Multicast MAC and source port - Netgear APS1000W | Product Data Sheet - Page 42
ProSAFE® LAN Access and Aggregation Chassis Switches Data Sheet M6100 series Number of static routes (v4/v6) Routing Heap size IPv4 only SDM build IPv4/IPv6 SDM build OSPF OSPFv2 max neighbors OSPFv3 max neighbors OSPFv3 max neighbors per interface Tunnels - Netgear APS1000W | Product Data Sheet - Page 43
Max Instances per Policy Max Attributes per Instance Max Service Interfaces Max Table Entries Class Table Class Rule Table Blade XCM8944 I/O Blade XCM8944F I/O Blade XCM8924X I/O Blade XCM89P PoE+ Daughter Card XCM89UP UPOE Daughter Card AFT603 Fan - Netgear APS1000W | Product Data Sheet - Page 44
Starter Kit (XCM8903SK-10000S) M6100-3S Base Chassis APS1000W Power Supply unit AFT603 Fan Tray XCM8944 I/O Blade XCM89P PoE+ Daughter Card -USB console cable Installation guide Resource CD (technical documentation, manuals) XCM89P PoE+ Daughter Card Installation guide The Starter Kit Bundle - Netgear APS1000W | Product Data Sheet - Page 45
AFT603 Fan Tray XCM8944F I/O Blade M6100-24X3 Starter Kit (XCM8903SX-10000S) M6100-3S Base Chassis APS1000W Power Supply unit AFT603 Fan I/O slots 3 power supply panels for empty PSU slots Installation guide Resource CD (technical documentation, manuals) C14 to C15 power cord (for PDUs and UPS) - Netgear APS1000W | Product Data Sheet - Page 46
-through wiring serial console cable to DB9 Mini-USB console cable Installation guide Resource CD (technical documentation, manuals) XCM89P PoE+ Daughter Card Installation guide XCM89UP UPOE Daughter Card Installation guide APS1000W PSU (-100NES version) North American power cord (AC plug --> C15 - Netgear APS1000W | Product Data Sheet - Page 47
through online chat* Lifetime Next Business Day hardware replacement* PROSUPPORT SERVICE PACKS Installation contracts PSB0304-10000S PSP1104-10000S Supplemental support contracts PMP3134-10000S PMB0334-10000S PMB0354-10000S Daughter Card PoE+ XCM8944/XCM8948 Daughter Card PoE+/UPOE XCM8944/XCM8948 - Netgear APS1000W | Product Data Sheet - Page 48
10000S XCM8903SF-10000S XCM8903SX-10000S XCM8948-10000S XCM8944-10000S XCM8944F-10000S XCM8924X-10000S XCM89P-10000S XCM89UP-10000S APS1000W-100NES APS1000W-100AJS AFT603-10000S technical support includes basic phone support for 90 days from purchase date and lifetime online chat support when
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
Highlights
Word-class availability
• Dependable continuity of operations with
non-stop switching, non-stop routing and
hitless failover supported for both fabric
and management
• N+1 redundancy for power supplies and
loop-free, disruption-free multi-chassis
link aggregation (MLAG)
High speed performance
• 1.4 Tbps total routing/switching capacity
and up to 1,071 Mpps intra-blade
throughput
• 480 Gbps distributed fabric inter-module
with each slot providing 2 x 40G access to
the passive backplane (80G half-duplex;
160G full-duplex)
Extra high-density
• Only 4U height (7 inches - 17.59cm) and
17.39 inches depth (44.16cm)
• Supports 144 RJ45 10/100/1000
ports, or 120 SFP 100/1000 ports, or
72 RJ45 10GBASE-T ports, or 48 SFP+
1000/10GBASE-X ports, or a combination
Higher flexibility
• Distributed fabric removes the need for a
dedicated supervisory module yet provides
passive backplane, redundant fabric and
redundant management
• Any I/O blade spares hardware and soſtware
distributed fabric on board, facilitating
campus management, maintenance and
upgrades
Lower complexity
• Entire feature set including datacenter
(DCBX, PFC, ETS, FIP Snooping) and
advanced IPv6 L3 routing (OSPF, PBR, BGP)
is available without a license
• Innovative slot-1 supervisory and slot-2
backup supervisory design simplifies the
entire chassis installation and ongoing
maintenance tasks
Investment protection
• Multi-role versatile platform engineered
for cost-effective Gigabit edge, flexible
Gigabit/10 Gigabit distribution and scalable
10 Gigabit core applications
• Any Gigabit copper blade can be upgraded
with PoE+ 30W or UPOE 60W daughter
card and downgraded later if the application
has changed
Industry standard management
• Industry standard command line interface
(CLI), functional NETGEAR web interface
(GUI), SNMP, sFlow and RSPAN
• Single-pane-of-glass NMS300
management platform with centralized
firmware updates and mass-configuration
support
Industry leading warranty
• NETGEAR M6100 series is covered under
NETGEAR ProSafe Lifetime Hardware
Warranty*
• 90 days of Technical Support via phone and
email, Lifetime Technical Support through
online chat and Lifetime Next Business Day
hardware replacement
Page 2 -3
Models at a glance
Page 4
Product brief
Page 5- 13
Modern access layer features highlights
Page 14- 15
Target application
Page 16 -21
Components and modules
Page 22 -48
Technical specifications and ordering information
ProSAFE® LAN Access and Aggregation Chassis Switches
Data Sheet
M6100 series
Page 1 of 48
The NETGEAR® LAN Access and Aggregation Chassis M6100
series delivers L2/L3/L4 and IPv4/IPv6 rich services for
enterprise edge and SMB core deployments, as well as 1G/10G
mixed infrastructures in server rooms. Innovative distributed
fabric provides non-stop forwarding resiliency and world-class
availability - including passive backplane, hitless failover,
redundant fabric and redundant management - without having
to pay the exorbitant acquisition and maintenance costs
associated by other networking vendors in this class. NETGEAR
Lan Access and Aggregation Chassis Switch solutions combine
the latest advances in hardware and soſtware engineering for
higher flexibility, lower complexity and stronger investment
protection, at a high-value price point.