Netgear DG834GT DG834GT Reference Manual - Page 31

Reference Manual for the Model DG834GT 108 Mbps Super Wireless ADSL Router Connecting the DG834GT to Your LAN This section provides instructions for connecting the DG834GT Super Wireless ADSL Router. Note: The Resource CD included with your router contains an animated Installation Assistant to help you through this procedure. How to Connect the Router There are four steps to connecting your firewall: 1. Install ADSL filters on the phone lines. 2. Connect the router to the ADSL filter. 3. Log in to the router. 4. Connect to the Internet. Follow the steps below to connect your router to your network. Before you begin, locate the ADSL configuration information from your Internet Service Provider (ISP). 1. CONNECT ADSL FILTERS ON THE PHONE LINES. a. You need to install a filter on every telephone or device that shares the same phone number as your ADSL router. Select the filter that came with your router. One-Line Filter 0HONE Splitter ,INE Two-Line Filter 0HONE With Splitter $3, Figure 3-3: ADSL microfilters Note: If you purchased the DG834GT in a country where the filter is not included, you must acquire one. b. Two-Line Filter Example. Insert the two-line filter into the phone outlet and connect the phone to the phone line connector (A): Connecting the Router to the Internet 3-5 August 2004