Netgear DG834Gv1 DG834v2 Installation Guide - Page 1
Netgear DG834Gv1 - 54 Mbps Wireless ADSL Firewall Modem Manual
View all Netgear DG834Gv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
54 Mbps Wireless ADSL Firewall Router DG834G Installation Guide Before you begin, locate the ADSL configuration information from your Internet Service Provider (ISP). Also, if you purchased the DG834G in a country where a microfilter is not included, you must acquire one. 1 Connect the DG834G to the ADSL Line ADSL signals degrade phone sound quality. Microfilters block such problems and are required for each phone or fax. There are two types: one-line microfilters; and two-line microfilters which include a built-in splitter. Sharing a phone outlet with two devices requires a splitter. One-Line Microfilter Phone Splitter Line Two-Line Combo Microfilter/Splitter DSL Phone The procedure below illustrates using a two-line combo microfilter/splitter. You can accomplish the same result using a one-line microfilter with a separate phone line splitter. Line DSL Phone a. Insert the filter into the phone outlet and connect the phone to the phone connector (A). A DSL Phone b. Turn off your computer. c. Connect the ADSL port (B) of the DG834G to the ADSL connector of the two-line filter. Line B 54 Mbps Wireless ADSL Firewall Router DG834G Note: Improperly connecting a filter to your DG834G will block ADSL signals and prevent connecting to the Internet. d. Connect the Ethernet cable (C) from a LAN port of your DG834G to the Ethernet adapter in your computer. f. Now, turn on your computer and verify the following: The local lights are lit for any connected computers. If software usually logs you in to the Internet, do not run it. The Internet Explorer Tools Internet Options Connections page should be set to "Never dial a connection." g. Install a filter on each phone device that shares the phone line with your router. Note: Use one-line filters for connecting additional phones. 2 Log in to the DG834G Note: Your computer needs to be configured for DHCP. For help with this, see the Reference Manual or tutorials on the 54 Mbps Wireless ADSL Firewall Router Resource CD. a. Connect to the router by typing http://192.168.0.1 in the address field of Internet Explorer or Netscape® Navigator. DSL Phone Line C 54 Mbps Wireless ADSL Firewall Router DG834G e. Plug in the router and verify the following: The power light is lit after applying power to the router. The ADSL link light is solid green, indicating a link has been established to the ADSL network. b. When prompted, enter admin for the user name and password for the password, both in lower case letters. After logging in, you will see the menu below. If you do not see the menu above, click the Setup Wizard link on the upper left of the main menu.