Netgear DG834Gv5 DG834Gv5 Setup Manual - Page 38
Default Configuration, Table 2., Factory Default Configuration Settings - admin password
View all Netgear DG834Gv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Default Configuration You can use the reset button located on the rear panel of your Wireless ADSL2+ Modem Router to reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for three seconds. Your Wireless ADSL2+ Modem Router will return to the factory configuration settings shown in the table below. Table 2. Factory Default Configuration Settings Feature Default Behavior Router Login User login URL http://www.routerlogin.net or http://www.routerlongin.com User name (case sensitive) admin Login password (case sensitive) password Internet Connection WAN MAC address Use default address WAN MTU size 1500 Port Speed AutoSense Local Network (LAN) Lan IP 192.168.0.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP starting IP address 192.168.0.2 DHCP ending IP address 192.168.0.254 DMZ Disabled Time zone GMT Time zone adjusted for daylight saving Disabled time Firewall Inbound (communications coming in from Disabled (except traffic on port 80, the http port) the Internet) Outbound (communications going out to Enabled (all) the Internet) Source MAC filtering Disabled 34 Technical Specifications and Default Configuration