Netgear DS104 DS104 Installation Guide

Netgear DS104 - Hub - Stackable Manual

Netgear DS104 manual content summary:

  • Netgear DS104 | DS104 Installation Guide - Page 1
  • Netgear DS104 | DS104 Installation Guide - Page 2
    network overload - Normal/Uplink push button for simplifying network extension • Compact, durable design that enables tabletop or wall mounting • Limited five-year warranty on the hub and three-year warranty on the power adapter Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 3
    & Owner Registration Card, Support Information Card 10M Link Activity 100M Link Activity Normal/Uplink Power adapter 9498FA Caution: Use the appropriate power cord as required by your national electrical codes and ordinances. Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 4
    DS116 Power Collision 1 2 3 4 5 6 7 8 Auto 10/100 MbpsDUAL SPEED 10M Link Activity 100M Link Activity Normal/Uplink 9 10 11 12 13 14 15 16 Model RT328 ISDN Router 100 Mbps 10 Mbps Servers PCs Power user 9090FA Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 5
    RJ-45 network ports Pow Col DUAL SPEED HUB DS108 100M 10M Auto 10/10D0UMAbpLs SPEED On - Link Blinking = Receive 100 Mbps 1 10 20 >40 10 Mbps Utilization% 1 2 3 4 5 6 7 8 Normal/Uplink 10 Mbps Utilization LEDs 10 Mbps Collision LED Power LED Normal/Uplink push button Power LED
  • Netgear DS104 | DS104 Installation Guide - Page 6
    100 Mbps network segment (some collisions are normal). A link is successfully established between the hub and the PC. No data link is established and/or the cable is not connected, is defective, or is the wrong type. There is incoming data on the port. Model DS104/DS106/DS108/DS116 Dual Speed Hub
  • Netgear DS104 | DS104 Installation Guide - Page 7
    the DS100 Series hubs are identical. Each has a ground clip and a receptacle for the power adapter. Rear Panel of the Model DS104, Model DS106, Model DS108, and Model DS116 Hub Ground clip 5 Vdc 800 mA - + Power receptacle 9092FB Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 8
    sources such as direct sunlight, warm air exhausts, or heaters. 90% maximum relative humidity, hub, hang the hub on the wall. 3. Connect the power cord(s) first to the power entry receptacle on the hub rear panel and then to the wall. Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 9
    to use a crossover cable. Caution: 100 Mbps operation requires the use of Category 5 UTP wiring with 100 Mbps certified connectors. NETGEAR highly recommends using Category 5 cable so your network can operate at either 10 or 100 Mbps. Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 10
    at 100 Mbps to support a growing number of PCs. For larger networks, use a 10/100 Mbps switch such as the NETGEAR Model FS104 switch, as shown in the illustration below. Switched network with Model DS104, Model DS108, and Model DS116 hubs Server Model DS104 hub Pow Col DUAL SPEED HUB DS104 1 10
  • Netgear DS104 | DS104 Installation Guide - Page 11
    half-duplex mode and is operating properly. Problems with port 4 (DS104) or port 6 (DS106) or port 8 (DS108) or port 16 (DS116) Normal/ Uplink push button in the wrong position Check the Normal/Uplink push button on the front panel. Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 12
    FCC Part 15, Class A EN 55 022 (CISPR 22), Class A VCCI Class A. C-Tick CE mark, commercial UL listed cUL listed TUV licensed T-Mark Limited Lifetime Power adapter 3 YEARS Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 13
    is not provided. If you are replacing a power supply, please confirm the voltage required by looking on the back of the hub. If you own an early version of the DS104, DS106, or DS108 that is 5 V, please order the DS116 power supply. Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
  • Netgear DS104 | DS104 Installation Guide - Page 14
    with the instruction manual, it may user may be required to take appropriate measures. Canadian Department of Communications Radio Interference Regulations This digital apparatus (Model DS104 Dual Speed Hub, Model DS106 Dual Speed Hub, Model DS108 Dual Speed Hub, and Model DS116 Dual Speed Hub
  • Netgear DS104 | DS104 Installation Guide - Page 15
    NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR E-mail: [email protected] http://www.NETGEAR.com *M-DS100NA-3*
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15