Netgear EN308TC EN308TC Installation Guide

Netgear EN308TC - 8 Port 10 Base-T Hub Manual

Get Netgear EN308TC - 8 Port 10 Base-T Hub PDF manuals and user guides View all Netgear EN308TC manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear EN308TC manual content summary:

  • Netgear EN308TC | EN308TC Installation Guide - Page 1
  • Netgear EN308TC | EN308TC Installation Guide - Page 2
    jabbering • Automatic polarity detection for recognizing and correcting incorrect polarity on the receive pair • Compact design, enabling easy tabletop or rack-mounting installation • Internal power adapter • Limited five-year warranty Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 3
    that your package contains the following: • Model EN308TC hub • Mounting kit (for wall installation) • BNC T-connector and BNC 50 Ω terminator • This installation guide • Warranty & Owner Registration Card • Support Information Card • Power cord 9125FA Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 4
    10BASE-T LEDs BNC Rx LED 8 PORT 10 Mbps Ethernet Hub PWR COL On=Link, Blinking=Receive 1 2 3 4 5 6 7 8 Partition MODEL EN308TC Rx Partition BNC Partition LED 9117FA Front Panel LEDs The is partitioned because of excessive collisions. Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 5
    Rear Panel The rear panel of the Model EN308TC hub has eight RJ-45 10BASE-T ports, a BNC port that you can use to connect to a backbone network or There is incoming data on the port. Blinking The port is partitioned because of excessive collisions. Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 6
    photocopy machine or arc welder). Minimum 12 inches (19.68 cm) front and back for service access and maintenance. Front and back clearance for cables and wiring hardware such as punchdown at least 2 inches of space all around the hub for ventilation. Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 7
    using port 8 on the Model EN308TC hub, set the Normal/Uplink push button to Normal. Normal/Uplink 1 2 3 4 5 6 7 8 9126FA Note: Ethernet specifications limit the cable length between your PC or server and the hub to 328 feet (100 meters) in length. Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 8
    number of ports or the number of users supported on the network. The 10BASE-T ports can be used to cascade hubs together. The twisted pair cable extended from a PC, server, or router Hub or switch Cable Used Straight-through cable Straight-through cable Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 9
    -240 VAC, 50-60Hz 0.2A max. Uplink 100M 10M Normal/Uplink On = Link Blinking = Activity 8 7 6 5 4 3 2 1 BNC 100-240 VAC, 50-60Hz 0.2A max. 9123FA Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 10
    4 5 6 7 8 Normal/Uplink 1 2 3 4 5 6 7 8 BNC 50 terminator 9124FA Note: Ethernet specifications limit a BNC segment to 30 BNC connections, specify a minimum of 1.64 feet (0.5 m) between any two stations, and limit segments to 607 feet (185 m) in length. Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 11
    and then back on. If the problem continues and you have completed all the preceding diagnoses, contact NETGEAR Customer Support. For the phone number of the representative in your area, see the Support Information Card included in your package contents. Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 12
    may have to segment the network with an Ethernet switch such as a NETGEAR Ethernet switch or to upgrade your network to Fast Ethernet operation. Wrong or miswired cables are used. Make sure that there is power to both the hub and the connected device. Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 13
    These ports are referred to as MDI-X or Normal ports. Computer and workstation adapter cards are usually media-dependent interface ports referred to as MDI or Uplink ports. twisted pair cable 1 Rx 2 Normal or MDI-X port 1 Rx 2 3 Tx 6 3 Tx 6 8146EC Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 14
    the hub to other devices. BNC connector Center conductor 1 Ground shield 2 8149EA The BNC T-connector and the 50 Ω terminator enable the BNC port on the hub to connect a thin coaxial segment. 50 Ω terminator BNC T-connector 50 OHM 8150FA Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 15
    Protocol and Standards Compatibility IEEE 802.3i, 10BASE-T, 10BASE-2, 10BASE-5 Ethernet Data Rate 10 Mbps, Manchester encoded Interface 10BASE-T ports (RJ 2 Electrical fast transient/burst: IEC 801-4, Level 2 Electrical surge: IEC 801-5, Level 2 Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 16
    the instruction manual, it NETGEAR Model EN308TC hub) respecte les limites de bruits radioélectriques visant les appareils numériques de classe A prescrites dans le Règlement sur le brouillage radioélectrique du ministère des Communications du Canada. Model EN308TC Ethernet Hub Installation Guide
  • Netgear EN308TC | EN308TC Installation Guide - Page 17
    NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR E-mail: [email protected] www.NETGEAR.com Model EN308TC Ethernet Hub Installation Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17