Netgear FSM726v3 7000 Series Managed Switch Administration Guide for Software - Page 171
Web Interface: Configuring a One-Way Access Using a TCP Flag in an ACL, Configuring the Switch
View all Netgear FSM726v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
NETGEAR Managed Switches Software Administration Manual, Release 8.0 Create VLAN 50 with port 1/0/25 and assign IP address 192.168.50.1/24. (Netgear Switch)(Config)#exit (Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 50 (Netgear Switch) (Vlan)#vlan routing 50 (Netgear Switch) (Vlan)#exit (Netgear Switch) #configure (Netgear Switch) (Config)#interface 1/0/25 (Netgear Switch) (Interface 1/0/25)#vlan pvid 50 (Netgear Switch) (Interface 1/0/25)#vlan participation include 50 (Netgear Switch) (Interface 1/0/25)#exit (Netgear Switch) (Config)#interface vlan 50 (Netgear Switch) (Interface-vlan 50)#routing (Netgear Switch) (Interface-vlan 50)#ip address 192.168.50.1 255.255.255.0 (Netgear Switch) (Interface-vlan 50)#exit (Netgear Switch) (Config)#exit Create VLAN 200 with port 1/0/48 and assign IP address 192.168.200.1/24. (Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 200 (Netgear Switch) (Vlan)#vlan routing 200 (Netgear Switch) (Config)#interface 1/0/48 (Netgear Switch) (Interface 1/0/48)#vlan pvid 200 (Netgear Switch) (Interface 1/0/48)#vlan participation include 200 (Netgear Switch) (Interface 1/0/48)#exit (Netgear Switch) #interface vlan 200 (Netgear Switch) (Interface-vlan 200)#routing (Netgear Switch) (Interface-vlan 200)#ip address 192.168.200.2 255.255.255.0 (Netgear Switch) (Interface-vlan 200)#exit Add two static routes so that the switch forwards the packets with destinations 192.168.100.0/24 and 192.168.30.0/24 to the correct next hops. (Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#ip route 192.168.100.0 255.255.255.0 192.168.200.1 (Netgear Switch) (Config)#ip route 192.168.30.0 255.255.255.0 192.168.200.1 Web Interface: Configuring a One-Way Access Using a TCP Flag in an ACL Configuring the Switch To use the Web interface to configure the switch, proceed as follows: 1. Create VLAN 30 with IP address 192.168.30.1/24: Access Control Lists (ACLs) v1.0, October 2009 11-11