Netgear GSM7248v2 7200 managed switch v8.x CLI reference manual - Page 266

Managed Switch CLI Manual, Release 8.0 no ip redirects Use this command to prevent the generation of ICMP Redirect messages by the router. Format Mode no ip redirects • Global Config • Interface Config ip icmp echo-reply Use this command to enable the generation of ICMP Echo Reply messages by the router. By default, the generation of ICMP Echo Reply messages is enabled. Default Format Mode enable ip icmp echo-reply Global Config no ip icmp echo-reply Use this command to prevent the generation of ICMP Echo Reply messages by the router. Format Mode no ip icmp echo-reply Global Config ip icmp error-interval Use this command to limit the rate at which IPv4 ICMP error messages are sent. The rate limit is configured as a token bucket, with two configurable parameters, burst-size and burst-interval. The burst-interval specifies how often the token bucket is initialized with burst-size tokens. burstinterval is from 0 to 2147483647 milliseconds (msec). The burst-size is the number of ICMP error messages that can be sent during one burst-interval. The range is from 1 to 200 messages. To disable ICMP rate limiting, set burst-interval to zero (0). Routing Commands v1.0, July 2009 4-31