Netgear GSM7248v2 Layer 3 Switches - Routing VLANs with shared access to the I - Page 4
Configuring the Switch management IP address - setup
View all Netgear GSM7248v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3 - Configuring the Switch management IP address The Management IP address (by default on VLAN1) can be setup using the CLI (Command Line Interface). The CLI should be access via HyperTerminal (or similar applications) using the Console cable included in the box User: admin Password: (FSM7352S) >enable Password: (GSM7352S) # (GSM7352S) #network protocol none Changing protocol mode will reset ip configuration. Are you sure you want to continue? (y/n)y (GSM7352S) #network parms 192.168.1.1 255.255.255.0 192.168.1.254 (GSM7352S) #show network IP Address 192.168.1.1 Subnet Mask 255.255.255.0 Default Gateway 192.168.1.254 Burned In MAC Address 00:1F:33:E6:81:A5 Locally Administered MAC Address 00:00:00:00:00:00 MAC Address Type Burned In Network Configuration Protocol Current......... None Management VLAN ID 1 Web Mode Enable Java Mode Enable (GSM7352S) # 4