Netgear GSM7328Sv1 GSM7328Sv2/GSM7352Sv2 Series Managed Switch Hardware Instal - Page 25
Install the Switch, Installing the Switch on a Flat Surface
View all Netgear GSM7328Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Managed Stackable Layer 3 Switches GSM7328S v2 and GSM7352S v2 Hardware Installation Install the Switch You can install the switch on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads. Stick one rubber footpad on each of the four concave spaces on the bottom of the switch. The rubber footpads cushion the switch against shock and vibrations. Installing the Switch in a Rack To install the switch in a rack, you will need the 19-inch rack-mount kit supplied with your switch. 1. Attach the supplied mounting brackets to the side of the switch. 2. Use the provided Phillips head screws to fasten the brackets to the sides of the switch. mounting bracket Figure 3-1 3. Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket. Hardware Installation 3-5 v1.0, July 2009