Netgear GSM7328Sv1 Password recovery procedure for Layer 2 and Layer 3 switche - Page 5
configuration to be saved before power cycling, to avoid the changes to be lost.
 |
View all Netgear GSM7328Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENABLE PASSWORD Exit the Config mode with the Exit command Use CTRL+Z keys to exit the Privileged EXEC mode (#) Type the enable password command to enter the password mode Enter the old password (in this case press enter as there is no old password) Enter and Confirm the new password Save the configuration and reload the switch Before the changes can take place the switch will need rebooting. This will require the configuration to be saved before power cycling, to avoid the changes to be lost. SAVE THE CONFIGURATION Enter the Privileged EXEC mode using en or enable Save the configuration using the ➑ command copy system-running nvram:startup-config Enter Y when prompted ➑The configuration is now saved Version 1.0
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
Version 1.0
ENABLE PASSWORD
Exit the Config mode with the
Exit
command
Use CTRL+Z keys to exit the Privileged
EXEC mode (#)
Type the
enable password
command to
enter the password mode
Enter the old password (in this case press
enter as there is no old password)
Enter and Confirm the new password
Save the configuration and reload the switch
Before the changes can take place the switch will need rebooting. This will require the
configuration to be saved before power cycling, to avoid the changes to be lost.
SAVE THE CONFIGURATION
Enter the Privileged EXEC mode using
en
or
enable
Save the configuration using the
command
copy system-running
nvram:startup-config
Enter
Y
when prompted
➑
The configuration is now saved
➑