Netgear GSM7352Sv1 Password recovery procedure for Layer 2 and Layer 3 switche - Page 3
Start FSM73xxS Application
 |
View all Netgear GSM7352Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
➍ Password recovery ➎ ➏ ➍ Power on the Switch (the output shown in the picture should be now visible in Hyper Terminal) The following two items will be displayed: 1 - Start FSM73xxS Application (depending on the switch model) 2 - Display Utility Menu ➎ Select 2 and press enter within 3 seconds from the options being displayed. If no selection is made within 3 seconds reboot the switch. After the choice at ➎ , a new Menu will be displayed ➏ Choose option number 7 for Password Recovery procedure Version 1.0
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
Version 1.0
➍
Power on the Switch (the output
shown in the picture should be now
visible in Hyper Terminal)
Password recovery
The following two items will be displayed:
1
–
Start FSM73xxS Application
(depending on the switch model)
2
–
Display Utility Menu
➎
Select 2 and press enter within 3
seconds from the options being
displayed. If no selection is made within 3
seconds reboot the switch.
After the choice at
➎
,
a new Menu will
be displayed
➏
Choose option number 7 for Password
Recovery procedure
➍
➎
➏