Netgear HE102 HE102 Reference Manual - Page 16

LED Power Ethernet (Lnk/Activity) WLAN (Link/Activity) STATUS Off On Blink Off Green On Green Blink Amber On Amber Blink Off Very Slow Blink Slow Blink Fast Blink DESCRIPTION No Power Power On Indicates: 1. running self-test, or 2. loading software, or 3. system fault Indicates no Ethernet link detected 100 Mbps Fast Ethernet link detected, no activity Indicates data traffic on the 100 Mbps LAN 10 Mbps Ethernet link detected but no activity Indicates data traffic on the 10 Mbps LAN Indicates no wireless link Looking for network association Associated with network but no activity Indicates the HE102 is transmitting or receiving data through wireless links System Requirements Before installing the HE102, make sure of you meet the following requirements: ♦ A 10/100 Mbps Local Area Network device such as hub or switch. ♦ A Category 3 or 5 UTP Ethernet cable with RJ-45 connector ♦ An A/C Power outlet (100-240 V, 50-60 HZ) ♦ A Web browser for configuration: Microsoft I.E 5.0 or above or Netscape Navigator 4.7 or later version ♦ One computer with TCP/IP protocol installed 14